Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2508.18629 · Optics Letters

Theoretical and experimental study of the correlation between pulsed light repetition frequency and electric field measurement

Ke Di, Ye Chenglin Ye, Meihui Liu, Pengfei Shi, Yu Liu, Jun He, Jiajia Du

Published Feb 17, 2026• 0 citations
arXivHTMLPDF

Abstract

We propose a novel, to the best of our knowledge, approach for improving the performance of Rydberg atom sensors by utilizing the repetition frequency of pulsed lasers, which has been validated through experimental testing. Rydberg atoms excited by pulsed lasers are influenced significantly by the repetition frequency of the pulsed laser on the Rydberg state population. As the number of Rydberg atoms increases, the measurement sensitivity of the sensor to external fields also increases, directly enhancing the performance of the sensor. This paper investigates the response of the sensor to the same electric field when the repetition frequency of the pulsed laser is at the MHz level, with a focus on its gain effects on the broadcast communication frequency bands of 66 MHz and 88 MHz. This research substantiates the distinctive benefits of pulsed light for Rydberg atom excitation, thereby enhancing the efficacy of the detection of feeble signals and introducing a new approach for the development of more sensitive atomic sensors.

DOI
10.1364/ol.587374

Related papers

Electric field measurements of a Rydberg atomic frequency comb based on pulsed laser excitation

Ke Di, Chenglin Ye, Yijie Du +4 more

We present an innovative frequency comb methodology utilizing pulsed lasers for Rydberg atoms and implement it for electric field measurement. It achieves the Rydberg state population of multi-velocity group atoms through the two-photon resonant excitation of a 509 nm pulsed laser and an 852 nm continuous laser. The frequency comb approach markedly elevates the population of Rydberg atoms and augments the atomic density for sensing, thereby enhancing measurement sensitivity. Our investigations generated high-sensitivity measurements of electric fields across a broad spectrum from 20 kHz to 96 MHz, with a minimum measured electric field sensitivity of 2.9uV/cm/Hz(1/2). Additionally, we have exhibited a high degree of measurement sensitivity in the 66 MHz and 88 MHz broadcast communication frequencies. This research enhances the effective detection of microwave signals over a broad spectrum of frequency bands utilizing Rydberg atoms and introduces an innovative technical methodology for microwave metrology grounded in Rydberg atoms.

arXiv:2507.08539•Chinese Optics Letters•Jan 1, 2026•1 citation

Highly Sensitive Measurement of a Megahertz rf Electric Field with a Rydberg-Atom Sensor

Bang Liu, Lihua Zhang, Zong-Kai Liu +6 more

Rydberg atoms have great potential in electric field measurement and have an advantage with a large frequency bandwidth from the kHz to the THz scale. However, the sensitivity for measuring a weak MHz electric field signal is limited by the spectroscopic resolution, because the weak electric field induces only a small perturbation of the population and energy-level shift of the Rydberg atoms. Here, we report highly sensitive measurement of a weak MHz electric field using electromagnetically induced transparency with Rydberg atoms in a thermal atomic system. Using the heterodyne method on a 30-MHz electric field, we successfully measure the minimum electric field strength to be $37.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}/\mathrm{cm}$ with a sensitivity up to $\ensuremath{-}65$ dBm/Hz and a linear dynamic range over 65 dB. Additionally, we measure an amplitude-modulated signal and demodulate the signal with a fidelity over 98%. This work extends the sensitivity of atomic sensors for measuring MHz electric fields, which advances atomic electric field-sensing technology.

arXiv:2206.06576•Physical Review Applied•Jul 19, 2022•110 citations

Cavity-Enhanced Rydberg Atom Microwave Receiver

Bang Liu, Lihua Zhang, Qifeng Wang +11 more

Abstract Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity, which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.

arXiv:2404.06915•Chinese Physics Letters•Apr 7, 2025•32 citations

Sensing Low-Frequency Field with Rydberg Atoms via Quantum Weak Measurement

Ding Wang, Shenchao Jin, Xiayang Fan +5 more

Recently, Rydberg atom has emerged as an attractive choice to realize quantum sensing of low-frequency electric field. The progress so far has mostly utilized the intensity and phase changes in probe laser and the corresponding detection mechanism still remains classical. Nevertheless, external field acting on the Rydberg state can induce the polarization variation of probe laser in the Rydberg electromagnetically induced transparency (EIT) system embedded in realistic multi-state atoms. We experimentally observe this phenomenon and realize signal extraction by appropriately utilizing the polarization degrees of freedom. Based on such a mechanism, we further design and implement a quantum weak measurement scheme, which clearly suppresses the technical noise and leads to considerable improvement of performance. Evaluation of the sensitivities across different post-selection angles demonstrates that the weak measurement results agree well with the theoretical model predictions. The advantages of our method are analyzed from multiple aspects, including characterizing the responses over different frequencies and comparing the responses of the weak measurement scheme and the traditional transmission-based method. After accounting for the screening effect of a measured ratio 17\% where the $^\text{87}$Rb atoms experience a substantially reduced field inside the glass cell, the performance reaches 33 $μ\text{V}~\text{cm}^\text{-1}~\text{Hz}^\text{-1/2}$ in sensitivity and 1.0 $μ\text{V/cm}$ in minimal detectable field for an integration time of 1000 s, as perceived by the atoms.

physics.atom-phCross-listedarXiv:2603.09518•Mar 11, 2026•4 citations

Shortwave Ultrahigh-Sensitivity Rydberg Atomic Electric Field Sensing Based on a Subminiature Resonator

Ruiqi Mao, Yi Lin, Aojie Zhou +2 more

Rydberg atomic electric field sensors have attracted the attention of international researchers due to their powerful electric field measurement capabilities. Especially in the shortwave (SW) frequency band (3–30 MHz), using only millimeter-level sensors to receive SW signals is undoubtedly attractive. However, due to the extremely difficult excitation of the Rydberg atoms that resonate with the SW frequency, the sensitivity of the Rydberg atoms SW measurement is low. Here, we report that a method to improve the SW sensitivity by using an SW resonator, which is extremely small in electrical size ($0.0043\lambda \times 0.0035\lambda \times 0.007\lambda $), can achieve continuous resonant frequency coverage from 9.365 to 10.223 MHz and can increase the sensitivity of electric field measurement by a factor of 8633. In the state of far off-resonant, we have achieved a detectable field strength as low as$2.41~\mu $V/m with a sensitivity of$1.71~\mu $V/mHz$^{1/2}$using the heterodyne Rydberg atom-based mixer method, which realizes ultrahigh-sensitivity measurement of SWs. In addition, for the first time outside the laboratory, we directly received an amplitude-modulated broadcast signal with 880 km (the straight-line distance between Changsha and Baoji) at 9.81 MHz in the form of a subminiature resonator combined with a Rydberg field probe (RFP), which verified the powerful ability of this sensing scheme.

IEEE Transactions on Antennas and Propagation•Aug 13, 2024•20 citations

Profiling a Rydberg-Atom Electric Field Sensor for Off-Resonant Detection of Sub-100 MHz RF Signals

Michael A. Viray, Abby Halasi-Kun, Baran Kayim +3 more

We present a Rydberg-Atom electric field sensor optimized to detect signals at sub-100 MHz carrier frequencies. The sensing setup employs a sapphire vapor cell that allows for detection of signals below 100 MHz-typical vapor cells made of glass or quartz demonstrate strong screening of radio frequency (RF) signals in this frequency regime. Applied signals are detected by observing AC Stark shifts in the atomic vapor energy levels. As a test case for the commercial utility of this receiver, we perform our tests at several carrier frequencies in the Industrial, Scientific, and Medical (ISM) band. At each carrier frequency, we report sensitivity, minimum detectable field, and detectable electric-field dynamic range. We also present a routine for optimizing off-resonant signal detection by tuning experimental parameters such as Rydberg coupler laser detuning and RF local oscillator strength. This Python-based optimization routine, which can be used at any off-resonant carrier frequency, is shared on GitHub for others to use in their own investigations.

arXiv:2606.10151•Sensors•Sep 17, 2026•0 citations
We propose a novel, to the best of our knowledge, approach for improving the performance of Rydberg atom sensors by utilizing the repetition frequency of pulsed lasers, which has been validated through experimental testing. Rydberg atoms excited by pulsed lasers are influenced significantly by the repetition frequency of the pulsed laser on the Rydberg state population. As the number of Rydberg atoms increases, the measurement sensitivity of the sensor to external fields also increases, directly enhancing the performance of the sensor. This paper investigates the response of the sensor to the same electric field when the repetition frequency of the pulsed laser is at the MHz level, with a focus on its gain effects on the broadcast communication frequency bands of 66 MHz and 88 MHz. This research substantiates the distinctive benefits of pulsed light for Rydberg atom excitation, thereby enhancing the efficacy of the detection of feeble signals and introducing a new approach for the development of more sensitive atomic sensors.
We present an innovative frequency comb methodology utilizing pulsed lasers for Rydberg atoms and implement it for electric field measurement. It achieves the Rydberg state population of multi-velocity group atoms through the two-photon resonant excitation of a 509 nm pulsed laser and an 852 nm continuous laser. The frequency comb approach markedly elevates the population of Rydberg atoms and augments the atomic density for sensing, thereby enhancing measurement sensitivity. Our investigations generated high-sensitivity measurements of electric fields across a broad spectrum from 20 kHz to 96 MHz, with a minimum measured electric field sensitivity of 2.9uV/cm/Hz(1/2). Additionally, we have exhibited a high degree of measurement sensitivity in the 66 MHz and 88 MHz broadcast communication frequencies. This research enhances the effective detection of microwave signals over a broad spectrum of frequency bands utilizing Rydberg atoms and introduces an innovative technical methodology for microwave metrology grounded in Rydberg atoms.
Rydberg atoms have great potential in electric field measurement and have an advantage with a large frequency bandwidth from the kHz to the THz scale. However, the sensitivity for measuring a weak MHz electric field signal is limited by the spectroscopic resolution, because the weak electric field induces only a small perturbation of the population and energy-level shift of the Rydberg atoms. Here, we report highly sensitive measurement of a weak MHz electric field using electromagnetically induced transparency with Rydberg atoms in a thermal atomic system. Using the heterodyne method on a 30-MHz electric field, we successfully measure the minimum electric field strength to be $37.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}/\mathrm{cm}$ with a sensitivity up to $\ensuremath{-}65$ dBm/Hz and a linear dynamic range over 65 dB. Additionally, we measure an amplitude-modulated signal and demodulate the signal with a fidelity over 98%. This work extends the sensitivity of atomic sensors for measuring MHz electric fields, which advances atomic electric field-sensing technology.
Abstract Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity, which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.
Recently, Rydberg atom has emerged as an attractive choice to realize quantum sensing of low-frequency electric field. The progress so far has mostly utilized the intensity and phase changes in probe laser and the corresponding detection mechanism still remains classical. Nevertheless, external field acting on the Rydberg state can induce the polarization variation of probe laser in the Rydberg electromagnetically induced transparency (EIT) system embedded in realistic multi-state atoms. We experimentally observe this phenomenon and realize signal extraction by appropriately utilizing the polarization degrees of freedom. Based on such a mechanism, we further design and implement a quantum weak measurement scheme, which clearly suppresses the technical noise and leads to considerable improvement of performance. Evaluation of the sensitivities across different post-selection angles demonstrates that the weak measurement results agree well with the theoretical model predictions. The advantages of our method are analyzed from multiple aspects, including characterizing the responses over different frequencies and comparing the responses of the weak measurement scheme and the traditional transmission-based method. After accounting for the screening effect of a measured ratio 17\% where the 87^\text{87}87Rb atoms experience a substantially reduced field inside the glass cell, the performance reaches 33 μV cm-1 Hz-1/2μ\text{V}~\text{cm}^\text{-1}~\text{Hz}^\text{-1/2}μV cm-1 Hz-1/2 in sensitivity and 1.0 μV/cmμ\text{V/cm}μV/cm in minimal detectable field for an integration time of 1000 s, as perceived by the atoms.
Rydberg atomic electric field sensors have attracted the attention of international researchers due to their powerful electric field measurement capabilities. Especially in the shortwave (SW) frequency band (3–30 MHz), using only millimeter-level sensors to receive SW signals is undoubtedly attractive. However, due to the extremely difficult excitation of the Rydberg atoms that resonate with the SW frequency, the sensitivity of the Rydberg atoms SW measurement is low. Here, we report that a method to improve the SW sensitivity by using an SW resonator, which is extremely small in electrical size ($0.0043\lambda \times 0.0035\lambda \times 0.007\lambda $), can achieve continuous resonant frequency coverage from 9.365 to 10.223 MHz and can increase the sensitivity of electric field measurement by a factor of 8633. In the state of far off-resonant, we have achieved a detectable field strength as low as$2.41~\mu $V/m with a sensitivity of$1.71~\mu V/mHzV/mHzV/mHz^{1/2}$using the heterodyne Rydberg atom-based mixer method, which realizes ultrahigh-sensitivity measurement of SWs. In addition, for the first time outside the laboratory, we directly received an amplitude-modulated broadcast signal with 880 km (the straight-line distance between Changsha and Baoji) at 9.81 MHz in the form of a subminiature resonator combined with a Rydberg field probe (RFP), which verified the powerful ability of this sensing scheme.
We present a Rydberg-Atom electric field sensor optimized to detect signals at sub-100 MHz carrier frequencies. The sensing setup employs a sapphire vapor cell that allows for detection of signals below 100 MHz-typical vapor cells made of glass or quartz demonstrate strong screening of radio frequency (RF) signals in this frequency regime. Applied signals are detected by observing AC Stark shifts in the atomic vapor energy levels. As a test case for the commercial utility of this receiver, we perform our tests at several carrier frequencies in the Industrial, Scientific, and Medical (ISM) band. At each carrier frequency, we report sensitivity, minimum detectable field, and detectable electric-field dynamic range. We also present a routine for optimizing off-resonant signal detection by tuning experimental parameters such as Rydberg coupler laser detuning and RF local oscillator strength. This Python-based optimization routine, which can be used at any off-resonant carrier frequency, is shared on GitHub for others to use in their own investigations.