Control of the polarization of microwave fields is a key experimental capability for a number of atomic physics platforms. However, producing high-fidelity microwaves requires a well-controlled microwave environment, where reflections that distort the polarization must be avoided or well characterized, a constraint that often conflicts with other experimental design considerations. Here we demonstrate a microwave control system capable of producing high-fidelity microwave polarizations in a Rydberg-ensemble experiment. We use three in-vacuum DC electrodes, repurposed as microwave antennae, to produce imperfect and initially unknown polarizations. Each source is driven with independent phase and amplitude control to generate the desired microwave fields. We probe the fields produced at the position of the atoms using Rydberg-EIT spectroscopy of the microwave-induced avoided crossings. We produce $σ_-$, $π$, and $σ_+$ polarized microwaves with > 99 % fidelity and generate their combinations. We extend our purification techniques to frequencies away from Rydberg resonances by utilizing an auxiliary microwave field, generating two-photon microwave resonances. The techniques developed here will facilitate the engineering of dipolar interactions in atomic and molecular physics experiments.
Control of the polarization of microwave fields is a key experimental capability for a number of atomic physics platforms. However, producing high-fidelity microwaves requires a well-controlled microwave environment, where reflections that distort the polarization must be avoided or well characterized, a constraint that often conflicts with other experimental design considerations. Here we demonstrate a microwave control system capable of producing high-fidelity microwave polarizations in a Rydberg-ensemble experiment. We use three in-vacuum DC electrodes, repurposed as microwave antennae, to produce imperfect and initially unknown polarizations. Each source is driven with independent phase and amplitude control to generate the desired microwave fields. We probe the fields produced at the position of the atoms using Rydberg-EIT spectroscopy of the microwave-induced avoided crossings. We produce σ−, π, and σ+ polarized microwaves with > 99 % fidelity and generate their combinations. We extend our purification techniques to frequencies away from Rydberg resonances by utilizing an auxiliary microwave field, generating two-photon microwave resonances. The techniques developed here will facilitate the engineering of dipolar interactions in atomic and molecular physics experiments.
Advances in the coherent control of Rydberg atoms have led to an explosion in their use in a wide range of topics, including quantum computation, simulation, sensing, and networking. More specifically, Rydberg-coupled ensembles of atoms interfaced with a single mode of light have enabled studies of fundamental light-matter interactions at the single-photon level and have emerged as a promising platform to realize scalable quantum networking nodes. In the first part of this thesis, we utilize Rydberg blockade to generate large ensembles that host a single Rydberg excitation and use the collective state as a resource to efficiently generate single photons. We further investigate the shelving of the collective Rydberg excitations to the ground-state manifold, where we observe an order of magnitude increase in the coherence time of the excitation. In the latter half of the thesis, we use near-resonant microwave fields to generate microwave-dressed Rydberg states, where we utilize the degrees of freedom of the microwave field to tune the strength, form, and angular dependence of the dipole-dipole interactions. To this end, we develop a robust and highly tunable microwave polarization control system. We use a set of in-vacuum electrodes as microwave antennas. We measure the microwave polarizations produced by each source at the positions of the atoms using a Rydberg EIT-based polarimetry technique. By characterizing the three imperfect sources, we find the control settings necessary to produce \sigma_-, \pi, and \sigma_+ polarized microwaves with >99 % fidelity. We extend our purification techniques to frequencies away from Rydberg resonances by utilizing an auxiliary microwave field, generating two-photon microwave resonances. The high-fidelity microwave polarizations are used to resonantly admix opposite-parity Rydberg states, generating dressed states with dipole-dipole interactions that are longer range and stronger than the bare van der Waals interactions. To characterize the strength of the interactions, we measure the photon-number statistics of the light generated by the ensemble of atoms. By varying the cloud length relative to the blockade radii, we demonstrate a clear enhancement of the interaction strength due to microwave dressing. Our platform enables further engineering of interactions by exploiting the polarization and frequency degrees of freedom of the microwave fields, opening pathways for new quantum control strategies in many different experimental platforms.
Experimental control over the strength and angular dependence of interactions between atoms is a key capability for advancing quantum technologies. Here, we use microwave dressing to manipulate and enhance Rydberg-Rydberg interactions in an atomic ensemble. By varying the cloud length relative to the blockade radius and measuring the statistics of the light retrieved from the ensemble, we demonstrate a clear enhancement of the interaction strength due to microwave dressing. These results are successfully captured by a theoretical model that accounts for the excitation dynamics, atomic density distribution, and phase-matched retrieval efficiency. Our approach offers a versatile platform for further engineering interactions by exploiting additional features of the microwave fields, such as polarization and detuning, opening pathways for new quantum control strategies.
A Rydberg atom-based mixer has opened up a new method to characterize microwave electric fields such as the precise measurement of their phase and strength. This study further demonstrates, theoretically and experimentally, a method to accurately measure the polarization of a microwave electric field based on a Rydberg atom-based mixer. The results show that the amplitude of the beat note changes with the polarization of the microwave electric field in a period of 180 degrees, and in the linear region a polarization resolution better than 0.5 degree can be easily obtained which reaches the best level by a Rydberg atomic sensor. More interestingly, the mixer-based measurements are immune to the polarization of the light field that forms the Rydberg EIT. This method considerably simplifies theoretical analysis and the experimental system required for measuring microwave polarization using Rydberg atoms and is of interest in microwave sensing.
Microwave (MW) fields with strong field strength, ultralow phase-noise, and tunable polarization are crucial for stabilizing and manipulating ultracold polar molecules, which have emerged as a promising platform for quantum science. In this article, we present the design, characterization, and performance of a robust MW setup tailored for precise control of molecular states. This setup achieves a high electric field intensity of 6.9 kV/m in the near-field from a dual-feed waveguide antenna, enabling a Rabi frequency as high as 71 MHz for the rotational transition of sodium-potassium molecules. In addition, the low noise signal source and controlled electronics provide ultralow phase-noise and dynamically tunable polarization. Narrowband filters within the MW circuitry further reduce phase noise by more than 20 dB at 20 MHz offset frequency, ensuring prolonged one-body molecular lifetimes up to 10 s. We also show practical methods to measure the MW field strength and polarization using a simple homemade dipole probe and to characterize phase-noise down to -170 dBc/Hz using a commercial spectrum analyzer and a notch filter. Those capabilities allowed us to evaporatively cool our molecular sample to deep quantum degeneracy. Furthermore, the polarization tunability enabled the observation of field-linked resonances and facilitated the creation of field-linked tetramers. These techniques advance the study of ultracold polar molecules and broaden the potential applications of MW tools in other platforms of quantum science.
Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.
Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.