Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.12376 · Physical Review A

Ultrafast switching of telecom photon-number states

Kate L. Fenwick, Frédéric Bouchard, Alicia Sit, Timothy Kit Hin Lee, Andrew H. Proppe, Guillaume Thekkadath, Duncan G. England, Philip J. Bustard, Jeff S. Lundeen, Benjamin Sussman

Published Jan 23, 2026• 0 citations
arXivHTMLPDF

Abstract

A crucial component of photonic quantum information processing platforms is the ability to modulate, route, convert, and switch quantum states of light noiselessly with low insertion loss. For instance, a high-speed, low-loss optical switch is crucial for scaling quantum photonic systems that rely on measurement-based feed-forward approaches. Such a device will also ideally be capable of operating on photon-number states, which can act as non-Gaussian resources. Here, we demonstrate ultrafast all-optical switching of heralded photon-number states, of up to 6 photons, using the optical Kerr effect in a single-mode fiber. A local birefringence is created by a high-intensity pump pulse at a center wavelength of 1030 nm which overlaps temporally with the 1550 nm photons in the fiber. A switching efficiency of $>$99 % is reached with a resolution of 2.3 ps, an insertion loss of $2.27\pm0.08$ dB, and a signal-to-noise ratio of 32,000.

DOI
10.1103/sgjn-12vf

Related papers

Terahertz-bandwidth switching of heralded single photons

Connor Kupchak, Jennifer Erskine, Duncan G. England +1 more

Optically induced ultrafast switching of single photons is demonstrated by rotating the photon polarization via the Kerr effect in a commercially available single-mode fiber. A switching efficiency of 97% is achieved with a ∼1.7 ps switching time and signal-to-noise ratio of ∼800. Preservation of the single-photon properties is confirmed by measuring no significant increase in the second-order autocorrelation function g(2)(0). These values are attained with only nanojoule-level pump energies that are produced by a laser oscillator with 80 MHz repetition rate. The results highlight a simple device capable of both high-bandwidth operations and preservation of single-photon properties for applications in photonic quantum processing and ultrafast time-gating or switching.

arXiv:1806.01245•Optics Letters•Mar 8, 2019•40 citations

Ultrafast all-optical switching of telecom single photons

Ujaan Purakayastha, Colin P. Lualdi, Paul G. Kwiat

Low-loss, ultrafast photon routing is an enabling technology for optical quantum information processing. We demonstrate a 20 GHz, all-optical switch for 1590-nm photons from a heralded single-photon source, achieving a signal-to-noise ratio of 140:1.

Frontiers in Optics•Jan 1, 2022•0 citations

Perspectives on all-optical Kerr switching for quantum optical applications

Duncan G. England, Frédéric Bouchard, Kate L. Fenwick +4 more

We offer a perspective on recent advances in picosecond-timescale all-optical switching with applications in quantum optics. The switch is based on polarization rotation in standard single-mode fiber via the optical Kerr effect. By using ultrafast laser pulses and short (∼10 cm) fibers, this technique can achieve a switching duration of ≲1 ps, at the repetition rate of 80 MHz or above. This high repetition rate is well-suited to quantum optics where experiments operate in the photon-counting regime. The switch efficiency can be ≳99% with a noise floor of just ∼10−4 photons/pulse, enabling high fidelity operations on quantum states of light, with negligible generation of spurious noise photons. We highlight the capabilities of this technique in four early applications: switching of heralded single photons, time-bin to polarization conversion of photonic qubits, noise gating for quantum key distribution, and pulse carving.

Applied Physics Letters•Oct 18, 2021•28 citations

Low-loss all-optical ns-switching for single-photon routing in scalable integrated quantum photonics

Fabian Ruf, Lars Nielsen, Mircea Balauroiu +2 more

Efficient single-photon routing and switching are crucial for optical quantum computing and communication. For this purpose, all-optical switches are designed for gigahertz bandwidths. The switching mechanism is based on the optical Kerr effect via cross-phase modulation (CPM) of the single-photon signal by a strong 1550-nm pump pulse. For energy-efficient switching, this nonlinear effect is exploited in a microresonator that can either be used directly as an intensity switch in a typical add–drop configuration or as a phase shifter in a Mach–Zehnder interferometer (MZI) structure. To speed up resonance build-up and quenching, a pre-emphasis build and an off-resonance wipe pulse are used. The proposed designs are verified by traveling-wave simulations which demonstrate that 0.1 dB insertion loss and ~1 ns switching windows can be achieved. For a scalable out-of-the-lab transfer, we investigate the feasibility of the proposed switch designs for fabrication in a mature photonic integrated circuit (PIC) platform. In particular, silicon nitride PICs have demonstrated record-low losses which makes them suitable for single-photon applications. By parametric modelling of the microresonator’s directional couplers based on Lumerical EME and 2.5-dimensional varFDTD simulations, the required power transmission coefficients for both signal and pump wavelength can be achieved. This results in an all-optical switch design ready for fabrication in a commercial PIC foundry which can potentially enable scalable architectures for quantum photonic applications.

Integrated Photonics Platforms•May 26, 2022•3 citations

Entanglement-Preserving Photonic Switching: Full Cross-Bar Operation With Quantum Data Streams

Neal N. Oza, Yu‐Ping Huang, Prem Kumar

As the field of quantum communications matures and adopts larger network topologies, it will require switches capable of multiplexing and demultiplexing entangled photons between network nodes. Such switches will need to operate at high speeds, with low loss, and minimal signal-band noise, while also retaining the quantum state of the routed photons. We present an all-optical, fiber-based, dual-in, dual-out switch that has a switching window of 45 ps and an insertion loss of <;3.0 dB. In addition, the switch introduces minimal degradation to the quantum state of the routed entangled photons. As a test of the switch's utility, we demultiplex a single quantum channel from a 6.5-GHz dual-channel quantum data stream. The recovered quantum state exhibits a fidelity of 96.2%±1.2% with the prepared state.

IEEE Photonics Technology Letters•Jan 24, 2014•18 citations

Low-Loss High-Speed C-Band Fiber-Optic Switch Suitable for Quantum Signals

Kim Fook Lee, Gregory S. Kanter

Quantum signals such as entangled photons are typically at the sub-photon level and, thus, require near noise-less and low-loss components for their manipulation and processing. A common signal-manipulation tool is a 2 × 2 switch, and many applications of quantum switches also require fast switching rates and input signals in the fiber-friendly 1550-nm band. Traditional optical switching technology does not simultaneously meet all the desired metrics for a quantum switch. We demonstrate a low-noise fiber-optic photonic switch based on cross phase modulation that is fast (sub-ns), low loss (<;1 dB), and operates in the 1550-nm wavelength band.

IEEE Photonics Technology Letters•Mar 18, 2019•12 citations
A crucial component of photonic quantum information processing platforms is the ability to modulate, route, convert, and switch quantum states of light noiselessly with low insertion loss. For instance, a high-speed, low-loss optical switch is crucial for scaling quantum photonic systems that rely on measurement-based feed-forward approaches. Such a device will also ideally be capable of operating on photon-number states, which can act as non-Gaussian resources. Here, we demonstrate ultrafast all-optical switching of heralded photon-number states, of up to 6 photons, using the optical Kerr effect in a single-mode fiber. A local birefringence is created by a high-intensity pump pulse at a center wavelength of 1030 nm which overlaps temporally with the 1550 nm photons in the fiber. A switching efficiency of >>>99 % is reached with a resolution of 2.3 ps, an insertion loss of 2.27±0.082.27\pm0.082.27±0.08 dB, and a signal-to-noise ratio of 32,000.
Optically induced ultrafast switching of single photons is demonstrated by rotating the photon polarization via the Kerr effect in a commercially available single-mode fiber. A switching efficiency of 97% is achieved with a ∼1.7 ps switching time and signal-to-noise ratio of ∼800. Preservation of the single-photon properties is confirmed by measuring no significant increase in the second-order autocorrelation function g(2)(0). These values are attained with only nanojoule-level pump energies that are produced by a laser oscillator with 80 MHz repetition rate. The results highlight a simple device capable of both high-bandwidth operations and preservation of single-photon properties for applications in photonic quantum processing and ultrafast time-gating or switching.
We offer a perspective on recent advances in picosecond-timescale all-optical switching with applications in quantum optics. The switch is based on polarization rotation in standard single-mode fiber via the optical Kerr effect. By using ultrafast laser pulses and short (∼10 cm) fibers, this technique can achieve a switching duration of ≲1 ps, at the repetition rate of 80 MHz or above. This high repetition rate is well-suited to quantum optics where experiments operate in the photon-counting regime. The switch efficiency can be ≳99% with a noise floor of just ∼10−4 photons/pulse, enabling high fidelity operations on quantum states of light, with negligible generation of spurious noise photons. We highlight the capabilities of this technique in four early applications: switching of heralded single photons, time-bin to polarization conversion of photonic qubits, noise gating for quantum key distribution, and pulse carving.
Efficient single-photon routing and switching are crucial for optical quantum computing and communication. For this purpose, all-optical switches are designed for gigahertz bandwidths. The switching mechanism is based on the optical Kerr effect via cross-phase modulation (CPM) of the single-photon signal by a strong 1550-nm pump pulse. For energy-efficient switching, this nonlinear effect is exploited in a microresonator that can either be used directly as an intensity switch in a typical add–drop configuration or as a phase shifter in a Mach–Zehnder interferometer (MZI) structure. To speed up resonance build-up and quenching, a pre-emphasis build and an off-resonance wipe pulse are used. The proposed designs are verified by traveling-wave simulations which demonstrate that 0.1 dB insertion loss and ~1 ns switching windows can be achieved. For a scalable out-of-the-lab transfer, we investigate the feasibility of the proposed switch designs for fabrication in a mature photonic integrated circuit (PIC) platform. In particular, silicon nitride PICs have demonstrated record-low losses which makes them suitable for single-photon applications. By parametric modelling of the microresonator’s directional couplers based on Lumerical EME and 2.5-dimensional varFDTD simulations, the required power transmission coefficients for both signal and pump wavelength can be achieved. This results in an all-optical switch design ready for fabrication in a commercial PIC foundry which can potentially enable scalable architectures for quantum photonic applications.
As the field of quantum communications matures and adopts larger network topologies, it will require switches capable of multiplexing and demultiplexing entangled photons between network nodes. Such switches will need to operate at high speeds, with low loss, and minimal signal-band noise, while also retaining the quantum state of the routed photons. We present an all-optical, fiber-based, dual-in, dual-out switch that has a switching window of 45 ps and an insertion loss of <;3.0 dB. In addition, the switch introduces minimal degradation to the quantum state of the routed entangled photons. As a test of the switch's utility, we demultiplex a single quantum channel from a 6.5-GHz dual-channel quantum data stream. The recovered quantum state exhibits a fidelity of 96.2%±1.2% with the prepared state.
Quantum signals such as entangled photons are typically at the sub-photon level and, thus, require near noise-less and low-loss components for their manipulation and processing. A common signal-manipulation tool is a 2 × 2 switch, and many applications of quantum switches also require fast switching rates and input signals in the fiber-friendly 1550-nm band. Traditional optical switching technology does not simultaneously meet all the desired metrics for a quantum switch. We demonstrate a low-noise fiber-optic photonic switch based on cross phase modulation that is fast (sub-ns), low loss (<;1 dB), and operates in the 1550-nm wavelength band.