Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Integrated Photonics Platforms

Low-loss all-optical ns-switching for single-photon routing in scalable integrated quantum photonics

Fabian Ruf, Lars Nielsen, Mircea Balauroiu, Nicolas Volet, Martijn J. R. Heck

Published May 26, 2022• 3 citations
Publisher

Abstract

Efficient single-photon routing and switching are crucial for optical quantum computing and communication. For this purpose, all-optical switches are designed for gigahertz bandwidths. The switching mechanism is based on the optical Kerr effect via cross-phase modulation (CPM) of the single-photon signal by a strong 1550-nm pump pulse. For energy-efficient switching, this nonlinear effect is exploited in a microresonator that can either be used directly as an intensity switch in a typical add–drop configuration or as a phase shifter in a Mach–Zehnder interferometer (MZI) structure. To speed up resonance build-up and quenching, a pre-emphasis build and an off-resonance wipe pulse are used. The proposed designs are verified by traveling-wave simulations which demonstrate that 0.1 dB insertion loss and ~1 ns switching windows can be achieved. For a scalable out-of-the-lab transfer, we investigate the feasibility of the proposed switch designs for fabrication in a mature photonic integrated circuit (PIC) platform. In particular, silicon nitride PICs have demonstrated record-low losses which makes them suitable for single-photon applications. By parametric modelling of the microresonator’s directional couplers based on Lumerical EME and 2.5-dimensional varFDTD simulations, the required power transmission coefficients for both signal and pump wavelength can be achieved. This results in an all-optical switch design ready for fabrication in a commercial PIC foundry which can potentially enable scalable architectures for quantum photonic applications.

DOI
10.1117/12.2621540

Related papers

Analysis and Design of Low-Loss and Fast All-Optical Switch Elements on Silicon Nitride for Integrated Quantum Photonics

Fabian Ruf, Lars Nielsen, Nicolas Volet +1 more

Fast and ultra-low loss single-photon switching and routing are essential for photonic quantum computation and communication. To address this need in a scalable fashion, all-optical switches that can be fabricated in an ultra-low loss and mature Si$_{3}$N$_{4}$photonic integrated circuit (PIC) foundry platform are designed and optimized for sub-ns switching times suitable for deterministic quantum-dot single-photon sources. The working principle relies on cross-phase modulation (XPM) of the single photons with a 1550-nm pump pulse and is enhanced by a ring resonator. Two different designs of the primary switch element are theoretically studied, namely a ring resonator intensity switch (RRIS) based on resonance shifting due to XPM and a ring resonator phase switch (RRPS) acting as an all-optical phase shifter in a Mach–Zehnder interferometer. As a novel approach to speed up the switching, chirped pre-emphasis and wipe sections for the pump pulses are utilized. A design tool is established from analytical expressions and serves as starting point for further optimization using a dedicated travelling-wave model (TWM). The TWM demonstrates the feasibility of both designs to be driven by either the proposed pre-emphasis pulse shape or a train of chirped Gaussian pulses. While the RRPS turns out to require less pump energy, its operation is more sensitive to pump-power fluctuations. Insertion losses below 0.1 dB and a power consumption below 5 nJ at 1 GHz switching rates for both configurations prove the potential of this concept for scalable quantum photonic applications.

Journal of Lightwave Technology•Oct 10, 2022•12 citations

Energy-Efficient Design of a Fast All-Optical Single-Photon Switch with Pre-Emphasis Pump Scheme

Fabian Ruf, Lars Nielsen, Nicolas Volet +1 more

Fast and ultralow-loss switching is crucial for optical quantum communication and computation. All-optical switches with gigahertz bandwidths that can be fabricated in a scalable foundry-based photonic integration platform are optimized for energy-efficient operation.

•Jan 1, 2023•0 citations

Ultrafast switching of telecom photon-number states

Kate L. Fenwick, Frédéric Bouchard, Alicia Sit +7 more

A crucial component of photonic quantum information processing platforms is the ability to modulate, route, convert, and switch quantum states of light noiselessly with low insertion loss. For instance, a high-speed, low-loss optical switch is crucial for scaling quantum photonic systems that rely on measurement-based feed-forward approaches. Such a device will also ideally be capable of operating on photon-number states, which can act as non-Gaussian resources. Here, we demonstrate ultrafast all-optical switching of heralded photon-number states, of up to 6 photons, using the optical Kerr effect in a single-mode fiber. A local birefringence is created by a high-intensity pump pulse at a center wavelength of 1030 nm which overlaps temporally with the 1550 nm photons in the fiber. A switching efficiency of $>$99 % is reached with a resolution of 2.3 ps, an insertion loss of $2.27\pm0.08$ dB, and a signal-to-noise ratio of 32,000.

arXiv:2504.12376•Physical Review A•Jan 23, 2026•0 citations

Scalable routing of single photons from a trapped ion on a photonic chip

Uday Saha, James Siverns, John Hannegan +7 more

We route the single photons from a trapped barium ion in a nanophotonic circuit. For this routing, we first generate C-band telecom single photons from barium ion which makes them compatible with the silicon-nitride photonic foundry. Then using the thermo-optic property of silicon-nitride, we switch the single photons in a Mach-Zehnder interferometer controlling the current of the phase-shifter. These results could enable a new generation of compact and reconfigurable integrated photonic devices that can serve as efficient quantum interconnects for quantum computers and sensors.

•Mar 4, 2022•0 citations

Ultralow loss, fast all-optical scalable switches

Mircea Balauroiu, Fabian Ruf, Nicolas Volet +1 more

Future quantum computing and communication require efficient and reliable routing of single photons. All-optical, ultralow-loss nonlinear switches with gigahertz bandwidths are proposed to address these needs and are verified by traveling-wave simulations.

IEEE Photonics Conference•Oct 1, 2021•0 citations

Routing Single Photons from a Trapped Ion Using a Photonic Integrated Circuit

Uday Saha, James Siverns, John Hannegan +4 more

Trapped ions are promising candidates for nodes of a scalable quantum network due to their long-lived qubit coherence times and high-fidelity single- and two-qubit gates. Future quantum networks based on trapped ions will require a scalable way to route photons between different nodes. Photonic integrated circuits from fabrication foundries provide a compact solution to this problem. However, these circuits typically operate at telecommunication wavelengths that are incompatible with the strong dipole emissions of trapped ions. In this work, we demonstrate the routing of single photons from a trapped ion using a photonic integrated circuit. We employ quantum frequency conversion to match the emission of the ion to the operating wavelength of a foundry-fabricated silicon nitride photonic integrated circuit, achieving a total transmission of 31.0% \ifmmode\pm\else\textpm\fi{} 0.9% through the device. Using programmable phase shifters, we switch the single photons between the output channels of the circuit and demonstrate a 50:50 beam splitting condition. These results constitute an important step towards programmable routing and entanglement distribution in large-scale quantum networks and distributed quantum computers.

arXiv:2203.08048•Physical Review Applied•Mar 1, 2023•12 citations
Efficient single-photon routing and switching are crucial for optical quantum computing and communication. For this purpose, all-optical switches are designed for gigahertz bandwidths. The switching mechanism is based on the optical Kerr effect via cross-phase modulation (CPM) of the single-photon signal by a strong 1550-nm pump pulse. For energy-efficient switching, this nonlinear effect is exploited in a microresonator that can either be used directly as an intensity switch in a typical add–drop configuration or as a phase shifter in a Mach–Zehnder interferometer (MZI) structure. To speed up resonance build-up and quenching, a pre-emphasis build and an off-resonance wipe pulse are used. The proposed designs are verified by traveling-wave simulations which demonstrate that 0.1 dB insertion loss and ~1 ns switching windows can be achieved. For a scalable out-of-the-lab transfer, we investigate the feasibility of the proposed switch designs for fabrication in a mature photonic integrated circuit (PIC) platform. In particular, silicon nitride PICs have demonstrated record-low losses which makes them suitable for single-photon applications. By parametric modelling of the microresonator’s directional couplers based on Lumerical EME and 2.5-dimensional varFDTD simulations, the required power transmission coefficients for both signal and pump wavelength can be achieved. This results in an all-optical switch design ready for fabrication in a commercial PIC foundry which can potentially enable scalable architectures for quantum photonic applications.
Fast and ultra-low loss single-photon switching and routing are essential for photonic quantum computation and communication. To address this need in a scalable fashion, all-optical switches that can be fabricated in an ultra-low loss and mature Si3_{3}3​N4_{4}4​photonic integrated circuit (PIC) foundry platform are designed and optimized for sub-ns switching times suitable for deterministic quantum-dot single-photon sources. The working principle relies on cross-phase modulation (XPM) of the single photons with a 1550-nm pump pulse and is enhanced by a ring resonator. Two different designs of the primary switch element are theoretically studied, namely a ring resonator intensity switch (RRIS) based on resonance shifting due to XPM and a ring resonator phase switch (RRPS) acting as an all-optical phase shifter in a Mach–Zehnder interferometer. As a novel approach to speed up the switching, chirped pre-emphasis and wipe sections for the pump pulses are utilized. A design tool is established from analytical expressions and serves as starting point for further optimization using a dedicated travelling-wave model (TWM). The TWM demonstrates the feasibility of both designs to be driven by either the proposed pre-emphasis pulse shape or a train of chirped Gaussian pulses. While the RRPS turns out to require less pump energy, its operation is more sensitive to pump-power fluctuations. Insertion losses below 0.1 dB and a power consumption below 5 nJ at 1 GHz switching rates for both configurations prove the potential of this concept for scalable quantum photonic applications.
A crucial component of photonic quantum information processing platforms is the ability to modulate, route, convert, and switch quantum states of light noiselessly with low insertion loss. For instance, a high-speed, low-loss optical switch is crucial for scaling quantum photonic systems that rely on measurement-based feed-forward approaches. Such a device will also ideally be capable of operating on photon-number states, which can act as non-Gaussian resources. Here, we demonstrate ultrafast all-optical switching of heralded photon-number states, of up to 6 photons, using the optical Kerr effect in a single-mode fiber. A local birefringence is created by a high-intensity pump pulse at a center wavelength of 1030 nm which overlaps temporally with the 1550 nm photons in the fiber. A switching efficiency of $>$99 % is reached with a resolution of 2.3 ps, an insertion loss of 2.27±0.082.27\pm0.082.27±0.08 dB, and a signal-to-noise ratio of 32,000.
We route the single photons from a trapped barium ion in a nanophotonic circuit. For this routing, we first generate C-band telecom single photons from barium ion which makes them compatible with the silicon-nitride photonic foundry. Then using the thermo-optic property of silicon-nitride, we switch the single photons in a Mach-Zehnder interferometer controlling the current of the phase-shifter. These results could enable a new generation of compact and reconfigurable integrated photonic devices that can serve as efficient quantum interconnects for quantum computers and sensors.
Trapped ions are promising candidates for nodes of a scalable quantum network due to their long-lived qubit coherence times and high-fidelity single- and two-qubit gates. Future quantum networks based on trapped ions will require a scalable way to route photons between different nodes. Photonic integrated circuits from fabrication foundries provide a compact solution to this problem. However, these circuits typically operate at telecommunication wavelengths that are incompatible with the strong dipole emissions of trapped ions. In this work, we demonstrate the routing of single photons from a trapped ion using a photonic integrated circuit. We employ quantum frequency conversion to match the emission of the ion to the operating wavelength of a foundry-fabricated silicon nitride photonic integrated circuit, achieving a total transmission of 31.0% \ifmmode\pm\else\textpm\fi{} 0.9% through the device. Using programmable phase shifters, we switch the single photons between the output channels of the circuit and demonstrate a 50:50 beam splitting condition. These results constitute an important step towards programmable routing and entanglement distribution in large-scale quantum networks and distributed quantum computers.