Interfacing single-photon detectors with active photonic components is a cornerstone photonic quantum technology. We describe how the output signal of commercial superconducting nanowire single-photon detectors can be used in situ to drive photonic components such as lasers and electro-optic modulators, co-located in the cryostat. This is enabled by developing custom circuitry using cryogenic-compatible discrete components in the SiGe-BiCMOS platform. We have demonstrated this with a number of experiments, in particular optical readout of an SNSPD and low-latency feed-forward modulation based on single-photon measurement events, all at or below 4 K. This manuscript is an abridged version of the Master thesis of the primary author N. Lamberty.
Interfacing single-photon detectors with active photonic components is a cornerstone photonic quantum technology. We describe how the output signal of commercial superconducting nanowire single-photon detectors can be used in situ to drive photonic components such as lasers and electro-optic modulators, co-located in the cryostat. This is enabled by developing custom circuitry using cryogenic-compatible discrete components in the SiGe-BiCMOS platform. We have demonstrated this with a number of experiments, in particular optical readout of an SNSPD and low-latency feed-forward modulation based on single-photon measurement events, all at or below 4 K. This manuscript is an abridged version of the Master thesis of the primary author N. Lamberty.
Quantum photonic processing via electro-optic components typically requires electronic links across different operation environments, especially when interfacing cryogenic components such as superconducting single photon detectors with room-temperature control and readout electronics. However, readout and driving electronics can introduce detrimental parasitic effects. Here we show an all-optical control and readout of a superconducting nanowire single photon detector (SNSPD), completely electrically decoupled from room temperature electronics. We provide the operation power for the superconducting detector via a cryogenic photodiode, and readout single photon detection signals via a cryogenic electro-optic modulator in the same cryostat. This method opens the possibility for control and readout of superconducting circuits, and feedforward for photonic quantum computing.
Scalable, low power, high speed data transfer between cryogenic and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and allows for very high bandwidth densities by carrying multiple signals through the same physical fiber. By operating a CMOS modulator in the forward bias regime at a temperature of 3.6 K, we have demonstrated the optical readout of a superconducting nanowire single-photon detector (SNSPD) without the need for an interfacing device.
Scalable, high speed data transfer between cryogenic (0.1-4 K) and room temperature environments is instrumental in a broad range of fields including quantum computing, superconducting electronics, single photon imaging and space-based communications. A promising approach to overcome the limitations of conventional wire-based readout is the use of optical fiber communication. Optical fiber presents a 100-1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and is also immune to electromagnetic interference, which allows routing of sensitive signals with improved robustness to noise and crosstalk. Most importantly, optical fibers allow for very high bandwidth densities (in the Tbps/mm2 range) by carrying multiple signals through the same physical fiber (Wavelength Division Multiplexing, WDM). Here, we demonstrate for the first time optical readout of a superconducting nanowire single-photon detector (SNSPD) directly coupled to a CMOS photonic modulator, without the need for an interfacing device. By operating the modulator in the forward bias regime at a temperature of 3.6 K, we achieve very high modulation efficiency (1000-10,000 pm/V) and a low input impedance of 500 Ω with a low power dissipation of 40 μW. This allows us to obtain optical modulation with the low, millivolt-level signal generated by the SNSPD. Optical communication is becoming the preferred I/O solution in modern, room temperature high performance systems, and this work demonstrates its suitability for scalable cryogenic readout, which could help achieve the full potential of superconducting technologies.
Advanced electro-optic processing combines electrical control with optical modulation and detection. For quantum photonic applications these processes must be carried out at the single photon level with high efficiency and low noise. Integrated quantum photonics has made great strides achieving single photon manipulation by combining key components on integrated chips which are operated by external driving electronics. Nevertheless, electrical interconnects between driving electronics and the electro-optic components, some of which require cryogenic operating conditions, can introduce parasitic effects. Here we show an all-optical interface which simultaneously delivers the operation power to, and extracts the measurement signal from, an advanced photonic circuit, namely, bias and readout of a superconducting nanowire single photon detector (SNSPD) on a single stage in a 1K cryostat. To do so, we supply all power for the single photon detector, output signal conditioning, and electro-optic readout using optical interconnects alone, thereby fully decoupling the cryogenic circuitry from the external environment. This removes the need to heatsink electrical connections, and potentially offers low-loss, high-bandwidth signal processing. This method opens the possibility to operate other advanced electrically decoupled photonic circuits such as optical control and readout of superconducting circuits, and feedforward for photonic quantum computing.
Abstract Scalable, low power, high speed data transfer between cryogenic (0.1–4 K) and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. A promising approach to overcome the limitations of conventional wire-based readout is the use of optical fiber communication. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and is also immune to electromagnetic interference, which allows routing of sensitive signals with improved robustness to noise and crosstalk. Most importantly, optical fibers allow for very high bandwidth densities (in the Tbps/mm2 range) by carrying multiple signals through the same physical fiber (Wavelength Division Multiplexing, WDM). Here, we demonstrate for the first time optical readout of a superconducting nanowire single-photon detector (SNSPD) directly coupled to a CMOS photonic modulator, without the need for an interfacing device. By operating the modulator in the forward bias regime at a temperature of 3.6 K, we achieve very high modulation efficiency (1,000–10,000 pm/V) and a low input impedance of 500 Ω with a low power dissipation of 40 μW. This allows us to obtain optical modulation with the low, millivolt-level signal generated by the SNSPD.
Photonic integrated circuits (PICs) have enabled novel functionality in quantum optics, quantum information processing and quantum communication. PICs based on Silicon Nitride (Si3N4) provide low-loss passive components and are compatible with efficient superconducting nanowire single-photon detectors (SNSPDs). For realizing functional quantum photonic systems, the integration with active phase-shifters is needed which is challenging at the cryogenic temperatures needed for operating SNSPDs. Here we demonstrate a cryo-compatible phase shifter using a low-voltage opto-mechanical modulator and show joint operation with SNSPDs at 1.3 K. We achieve a half-wave voltage of 4.6 V, single-photon detection with 88% on-chip detection efficiency (OCDE) and a low timing jitter of 12.2 ps. Our approach allows for operating reconfigurable quantum photonic circuits with low dissipation in a cryogenic setting.