arXiv:2412.15196 · Physical Review Research

Finite-time quantum Otto engine subject to control noise and enhancement techniques

Theodore McKeever, Owen Diba, Ahsan Nazir

Published Jun 30, 2025• 2 citations

Abstract

With the development of any quantum technology comes a need for precise control of quantum systems. Here, we evaluate the impact of control noise on a quantum Otto cycle. While it is postulated that noiseless quantum engines can approach maximal Otto efficiency in finite times, the existence of white noise on the controls is shown to negatively affect average engine performance. Two methods of quantum enhancement, counterdiabatic driving and quantum lubrication, are implemented and found to improve the performance of the noisy cycle only in specified parameter regimes. To gain insight into performance fluctuations, projective energy measurements are used to construct a noise-averaged probability distribution without assuming full thermalization or adiabaticity. From this, the variances in thermodynamic currents are observed to increase as average power and efficiency improve, and are also shown to be consistent with known bounds from thermodynamic uncertainty relations. Lastly, by comparing the average functioning of the unmonitored engine to a projectively measured engine cycle, the role of coherence in work extraction for this quantum engine model is investigated.

DOI: 10.1103/ct9q-xff8

Related papers

Non-Canonical Quantum Otto Engine

Wei Wu, Jun-Hong An

The fast-developing quantum technology is propelling thermal machine, which lies at the heart of thermodynamics, into a new golden era. Being stochastic because of the non-negligible thermal and quantum fluctuations, the efficiency and power of a finite-time quantum heat engine exhibit a trade-off, preventing the simultaneous achievement of high power and high efficiency. Conventional studies treat the statistics of a heat engine by assuming canonical thermalization, which is valid only under weak-coupling conditions. We here investigate the noncanonical effect on the statistics of the efficiency and power for a finite-time quantum Otto cycle. It is revealed that their average values and variances are highly controllable by engineering the energy spectrum structure of the composite system consisting of the working substance and the bath. Near the quantum critical point induced by the formation of a bound state in the energy spectrum, the average efficiency and power can be boosted simultaneously, meanwhile, both of their variances are decreased. Deepening our understanding of the usefulness of quantum reservoir engineering in thermodynamics, our result lays the foundation for the realization of efficient and stable quantum energy devices.

quant-pharXiv:2609.37194Sep 30, 20260 citations

Finite-time quantum Otto engine with a squeezed thermal bath: Role of quantum coherence and squeezing in the performance and fluctuations

Xiao Ping Yang, Dehua Liu, Jizhou He +2 more

We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.

arXiv:2205.13290May 26, 20222 citations

Boosting the performance of quantum Otto heat engines

Jin-Fu Chen, Chang-Pu Sun, Hui Dong

To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.

arXiv:1907.11567Physical review. ESep 30, 201939 citations

Feedback-driven quantum Otto-like engines

Dehua Liu, Yingying Hong, Shaolin Luo +3 more

An analytical study of a feedback-driven quantum engine based on a two-level system is presented. This engine is similar to a quantum Otto engine but substitutes the quantum isochoric process with a feedback-driven operation based on a measured observable $A(\ensuremath{\theta})$, whose eigenstates are coherent superpositions of energy eigenstates. Projective measurements control the feedback operations, while work extraction or heat absorption occurs during driven operations. We derive the general time-dependent efficiency, power, and power fluctuations. Quantum coherence is examined through three mechanisms: (i) coherence associated with $\ensuremath{\theta}\ensuremath{\ne}0$, (ii) residual coherence after incomplete thermalization, and (iii) coherence generated by the interaction between the system and a coherent laser pulse on resonance. We investigate how the parameter $\ensuremath{\theta}$, quantum coherence, and timing of unitary and feedback-driven strokes influence engine performance. We demonstrate that quantum coherence can significantly enhance power output and efficiency while reducing fluctuations through optimal cycle parameter adjustments.

Physical Review AJan 3, 20256 citations

Fluctuations in irreversible quantum Otto engines

Guangqian Jiao, Shoubao Zhu, Jizhou He +2 more

We derive the general probability distribution function of stochastic work for quantum Otto engines in which both the isochoric and driving processes are irreversible due to finite time duration. The time-dependent work fluctuations, average work, and thermodynamic efficiency are explicitly obtained for a complete cycle operating with an analytically solvable two-level system. The effects of the irreversibility originating from finite-time cycle operation on the thermodynamic efficiency, work fluctuations, and relative power fluctuations are discussed.

arXiv:2012.10621Physical review. EMar 18, 202115 citations

The Quantum Harmonic Otto Cycle

Ronnie Kosloff, Yair Rezek

The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved, employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating the basic definitions of work and heat. The relation between quantum observables and the state of the system is emphasized. The dynamical description of the cycle is based on a completely positive map formulated as a propagator for each stroke of the engine. Explicit solutions for these propagators are described on a vector space of quantum thermodynamical observables. These solutions which employ different assumptions and techniques are compared. The tradeoff between power and efficiency is the focal point of finite-time-thermodynamics. The dynamical model enables the study of finite time cycles limiting time on the adiabatic and the thermalization times. Explicit finite time solutions are found which are frictionless (meaning that no coherence is generated), and are also known as shortcuts to adiabaticity.The transition from frictionless to sudden adiabats is characterized by a non-hermitian degeneracy in the propagator. In addition, the influence of noise on the control is illustrated. These results are used to close the cycles either as engines or as refrigerators. The properties of the limit cycle are described. Methods to optimize the power by controlling the thermalization time are also introduced. At high temperatures, the Novikov–Curzon–Ahlborn efficiency at maximum power is obtained. The sudden limit of the engine which allows finite power at zero cycle time is shown. The refrigerator cycle is described within the frictionless limit, with emphasis on the cooling rate when the cold bath temperature approaches zero.

arXiv:1612.03582EntropyMar 23, 2017373 citations