Arrays of single atoms trapped in optical tweezers are increasingly recognized as a promising platform for scalable quantum computing. In both the fault-tolerant and NISQ eras, the ability to individually control qubits is essential for the efficient execution of quantum circuits. Time-division multiplexed control schemes based on atom shuttling or beam scanning have been employed to build programmable neutral atom quantum processors, but achieving high-rate, highly parallel gate operations remains a challenge. Here, we propose a fiber array architecture for atom quantum computing capable of fully independent control of individual atoms. The trapping and addressing lasers for each individual atom are emitted from the same optical waveguide, enabling robust control through common-mode suppression of beam pointing noise. Using a fiber array, we experimentally demonstrate the trapping and independent control of ten single atoms in two-dimensional optical tweezers, achieving individually addressed single-qubit gates with an average fidelity of 0.9966(3). More significantly, we perform simultaneous arbitrary single-qubit gates on four randomly selected qubits, resulting in an average fidelity of 0.9961(4). Our work paves the way for time-efficient execution of quantum algorithms on neutral atom quantum computers.
Arrays of single atoms trapped in optical tweezers are increasingly recognized as a promising platform for scalable quantum computing. In both the fault-tolerant and NISQ eras, the ability to individually control qubits is essential for the efficient execution of quantum circuits. Time-division multiplexed control schemes based on atom shuttling or beam scanning have been employed to build programmable neutral atom quantum processors, but achieving high-rate, highly parallel gate operations remains a challenge. Here, we propose a fiber array architecture for atom quantum computing capable of fully independent control of individual atoms. The trapping and addressing lasers for each individual atom are emitted from the same optical waveguide, enabling robust control through common-mode suppression of beam pointing noise. Using a fiber array, we experimentally demonstrate the trapping and independent control of ten single atoms in two-dimensional optical tweezers, achieving individually addressed single-qubit gates with an average fidelity of 0.9966(3). More significantly, we perform simultaneous arbitrary single-qubit gates on four randomly selected qubits, resulting in an average fidelity of 0.9961(4). Our work paves the way for time-efficient execution of quantum algorithms on neutral atom quantum computers.
Quantum computers must achieve large-scale fault-tolerant operation to deliver on their promise of transformational processing power. This will require thousands or millions of high-fidelity quantum gates and similar numbers of qubits. Demonstrations using neutral-atom qubits trapped and manipulated by lasers have shown that this modality can provide high two-qubit gate () fidelities and scalable operation. However, the gates in these demonstrations are driven by lasers that do not resolve individual qubits, with universal computation enabled by physical midcircuit shuttling of the qubits. This relatively slow operation may greatly extend run times for useful large-scale computation. Here, we demonstrate a universal neutral-atom quantum computer with gate rates limited by optical switching times, rather than shuttling, by individually addressing tightly focused laser beams at an array of single atoms. We achieve fidelity of 99.35(4)% and local single-qubit R Z gate fidelity of 99.902(8)% in both cases accounting for leakage out of the computational basis. Moreover, we demonstrate nondestructive readout of alkali-atom qubits with 0.9(3)% loss, which boosts operational speed. This technique also enables us to measure a state-of-the-art fidelity of 99.73(3)% when excluding atom-loss events, which may be mitigated through erasure conversion. Our results represent a critical step toward large-scale fault-tolerant neutral-atom quantum computers that can execute computations on practical timescales.
Programmable neutral-atom arrays offer a promising route toward scalable quantum computing, where coherent qubit transfer enables non-local connectivity and reduces resource overhead. However, transfer speed and motional heating remain key bottlenecks for fast and deep quantum circuits. Here, we employ a fiber array neutral-atom quantum computing architecture with site-resolved control of trap depths to realize smooth amplitude exchange between static and moving traps, thereby enabling fast and coherent qubit transfer with ultralow motional heating. With a 10 μs in situ transfer between static and moving traps, we obtain a per-cycle heating rate of 0.156(9) μK, sustain over 500 cycles with negligible atom loss, and achieve a quantum state fidelity of 0.99992(5) per cycle. For inter-site transfer between two separated static traps, the operation takes 120 μs with 0.783(17) μK heating per transfer, and remains negligible atom loss for up to 100 repeated cycles with a fidelity of 0.9998(1) per transfer. Furthermore, through experimental studies of parallel transfer, we establish a model that elucidates the relationship between array inhomogeneity and the transfer heating rate. This fast, low-heating coherent transfer capability provides a practical route for improving both speed and fidelity in atom-shuttling based quantum computing.
Abstract Programmable neutral-atom arrays offer a promising route toward scalable quantum computing, where coherent qubit transfer enables non-local connectivity and reduces resource overhead. However, transfer speed and motional heating remain key bottlenecks for fast and deep quantum circuits. Here, we employ a fiber array neutral-atom quantum computing architecture with site-resolved control of trap depths to realize smooth amplitude exchange between static and moving traps, thereby enabling fast and coherent qubit transfer with ultralow motional heating. With a 10-μs in situ transfer between static and moving traps, we obtain a per-cycle heating rate of 0.156(9) μK, sustain over 500 cycles with negligible atom loss, and achieve a quantum state fidelity of 0.99992 (5) per cycle. For inter-site transfer between two separated static traps, the operation takes 120 μs with 0.783(17) μK heating per transfer, and exhibits negligible atom loss for up to 100 repeated cycles with a fidelity of 0.9998 (1) per transfer. Furthermore, through experimental studies of parallel transfer, we establish a model that elucidates the relationship between array inhomogeneity and the transfer heating rate. This fast, low-heating coherent transfer capability provides a practical route for improving both speed and fidelity in atom-shuttling based quantum computing.
Neutral-atom arrays are a leading platform for quantum technologies, offering a promising route toward large-scale, fault-tolerant quantum computing. We propose a novel quantum processing architecture based on dual-type, dual-element atom arrays, where individually trapped atoms serve as data qubits, and small atomic ensembles enable ancillary operations. By leveraging the selective initialization, coherent control, and collective optical response of atomic ensembles, we demonstrate ensemble-assisted quantum operations that enable reconfigurable, high-speed control of individual data qubits and rapid mid-circuit readout, including both projective single-qubit and joint multi-qubit measurements. The hybrid approach of this architecture combines the long coherence times of single-atom qubits with the enhanced controllability of atomic ensembles, achieving high-fidelity state manipulation and detection with minimal crosstalk. Numerical simulations indicate that our scheme supports individually addressable single- and multi-qubit operations with fidelities of 99.5% and 99.9%, respectively, as well as fast single- and multi-qubit state readout with fidelities exceeding 99% within tens of microseconds. These capabilities open new pathways toward scalable, fault-tolerant quantum computation, enabling repetitive error syndrome detection and efficient generation of long-range entangled many-body states, thereby expanding the quantum information toolbox beyond existing platforms.
Integrating the scalability of individually addressable arrays of optical-tweezer-trapped single atoms with the efficient light-matter interface provided by nanophotonic waveguides has been a long-standing challenge in quantum technologies based on atoms and photons. Here we realize a quantum interface between photons guided in an optical nanofiber with a diameter of 310 nm and an array of on average 155 individually addressable atoms. Using a spatial light modulator and an objective lens with NA = 0.45, single cesium atoms are trapped in a one-dimensional array of 200 optical tweezer spots with micrometer-scale trap sizes on the nanofiber. Individual atoms are addressed by spatially scanning an excitation laser beam, focused to a spot size comparable to that of the traps through the same objective lens, along the nanofiber. We confirm the single-atom nature of the individual trapping sites through photon-correlation measurements of the guided fluorescence, observing strong photon antibunching with g(2)(0)≈0.26. We measure trap lifetimes of a few hundred milliseconds, with a maximum value of 460 ms, at an atom-surface separation of 670 nm without active cooling, representing an order-of-magnitude improvement over previous nanofiber traps. This platform opens a new regime for atom-photon interfaces, paving the way for scalable distributed quantum computing and quantum networks, as well as for the exploration of collective radiative effects in waveguide QED with individually addressable atoms.
Scalable arrays of identical single-photon sources are a central resource for photonic quantum information processing, quantum networks and quantum metrology. Neutral atoms provide intrinsically identical emitters that can be assembled and rearranged in optical tweezers, but a many-channel fiber interface to individually trapped atoms has remained a major technical challenge. Here we demonstrate a chip-interfaced single-photon source array based on 50 individually addressable 87Rb atoms. A glass waveguide fan-out converts the \SI{5}{\micro m} pitch of the optical-tweezer array to the \SI{127}{\micro m} pitch of a commercial fiber array, mapping each atom to its own waveguide, fiber and single-photon detector. We resolve all 50 channels with an average nearest-neighbor cross-talk of 0.4% and a uniform insertion loss of \SI{2.9}{dB}, and verify single-photon emission with g(2)(0)=0.29, presently limited by detector dark counts and residual cooling-light scattering. Combining per-channel atom discrimination, rearrangement and reservoir replenishment, we prepare source subarrays of up to 24 atoms with a 93% fill fraction. For small target numbers, atom loss is repaired from the reservoir at the detection-limited rate of \SI{118}{Hz}. We further fabricate a 784-channel waveguide chip, showing that the photonic interface can be extended well beyond the present number. This architecture establishes a fiber-native neutral-atom platform for larger arrays of identical single-photon sources.