Abstract We outline an experimental setup for efficiently preparing a tweezer array of 88Sr atoms. Our setup uses permanent magnets to maintain a steady-state two-dimensional magneto-optical trap (MOT) which results in a loading rate of up to 108 s−1 at 5 mK for the three-dimensional blue MOT. This enables us to trap 2 × 106 88Sr atoms at 2 μK in a narrow-line red MOT with the 1S0 → 3P1 intercombination transition at 689 nm. With the Sisyphus cooling and pairwise loss processes, single atoms are trapped and imaged in 813 nm optical tweezers, exhibiting a lifetime of 2.5 min. We further investigate the survival fraction of a single atom in the tweezers and characterize the optical tweezer array using a release and recapture technique. Our experimental setup serves as an excellent reference for those engaged in experiments involving optical tweezer arrays, cold atom systems, and similar research.
Abstract We outline an experimental setup for efficiently preparing a tweezer array of 88Sr atoms. Our setup uses permanent magnets to maintain a steady-state two-dimensional magneto-optical trap (MOT) which results in a loading rate of up to 108 s−1 at 5 mK for the three-dimensional blue MOT. This enables us to trap 2 × 106 88Sr atoms at 2 μK in a narrow-line red MOT with the 1S0 → 3P1 intercombination transition at 689 nm. With the Sisyphus cooling and pairwise loss processes, single atoms are trapped and imaged in 813 nm optical tweezers, exhibiting a lifetime of 2.5 min. We further investigate the survival fraction of a single atom in the tweezers and characterize the optical tweezer array using a release and recapture technique. Our experimental setup serves as an excellent reference for those engaged in experiments involving optical tweezer arrays, cold atom systems, and similar research.
We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
We demonstrate single-atom resolved imaging with a survival probability of 0.99932(8) and a fidelity of 0.99991(1), enabling us to perform repeated high-fidelity imaging of single atoms in tweezers thousands of times. We further observe lifetimes under laser cooling of more than seven minutes, an order of magnitude longer than in previous tweezer studies. Experiments are performed with strontium atoms in 813.4 nm tweezer arrays, which is at a magic wavelength for the clock transition. Tuning to this wavelength is enabled by off-magic Sisyphus cooling on the intercombination line, which lets us choose the tweezer wavelength almost arbitrarily. We find that a single not retroreflected cooling beam in the radial direction is sufficient for mitigating recoil heating during imaging. Moreover, this cooling technique yields temperatures below 5 μK, as measured by release and recapture. Finally, we demonstrate clock-state resolved detection with average survival probability of 0.996(1) and average state detection fidelity of 0.981(1). Our work paves the way for atom-by-atom assembly of large defect-free arrays of alkaline-earth atoms, in which repeated interrogation of the clock transition is an imminent possibility.
We report the experimental realization of strontium magneto-optical trap (MOT) operating on the intercombination transition 1 S 0 − 3 P 1 at 689 nm, namely red MOT. A 689 nm laser used for cooling and trapping is injection locked to a master laser, whose linewidth is narrowed to 150 Hz by locking to a high finesse optical reference cavity. 88 Sr atoms pre-cooled and trapped by the broad 1 S 0 − 1 P 1 transition at 461 nm are transferred to the red MOT with the help of a time sequence controller. The transfer ratio is about 20% and the red MOT's temperature is estimated to be less than 20 μK by the time-of-flight (TOF) image analysis.
Abstract We report on the trapping and imaging of individual ytterbium atoms in arrays of optical tweezers, loaded from a magneto-optical trap (MOT) formed by only five beams in an orthogonal configuration. In our five-beam MOT, operating on the narrow 1 S 0 → 3 P 1 intercombination transition, gravity balances the radiation pressure of a single upward-directed beam. This approach enables efficient trapping and cooling of the most common ytterbium isotopes ( 171 Yb, 173 Yb and 174 Yb) to ≲ 20 μ K at densities ∼ 10 11 atoms cm −3 within less than one second. This configuration allows for significantly reducing the complexity of the optical setup, potentially benefiting any ytterbium-atom based quantum science platform leveraging single-atom microscopy, from quantum processors to novel optical clocks. We then demonstrate the first single-atom-resolved imaging of the fermionic, large-spin isotope 173 Yb ( I = 5 / 2 ), employing a two-color imaging scheme that does not rely on magic-wavelength trapping. We achieve a high single-atom imaging fidelity of 99.96 ( 1 ) % and a large survival probability of 98.5 ( 2 ) % , despite large differential light shifts affecting all nuclear spin sublevels of the excited 3 P
We describe a simple and compact experimental setup for optical tweezer arrays of 87Rb atoms. This setup includes a compact vacuum system, a single cooling laser, a simple tweezer laser, and a flexible control system. The small vacuum system with only 40 cm length takes advantage of the high atomic flux two-dimensional magneto-optical trap (2D MOT) while maintaining a low background pressure in the 3D MOT chamber ensuring sufficient lifetime of the trapped atoms. Atom number of the laser cooled sample of 2e7 and temperature of 92 uK is achieved. The flexible control system with real-time waveform generator modules (RWG) provides precise control of all the RF devices, and enables real-time feedback control of both the global and individual beams in optical tweezer arrays. An optical tweezer array with 25x25 homogeneous traps is demonstrated. This simple and compact demo setup makes it more accessible to experimental quantum physics.