Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2505.07371 · Quantum Science and Technology

Single-atom imaging of 173 Yb in optical tweezers loaded by a five-beam magneto-optical trap

O Abdel Karim, Alessandro Muzi Falconi, Riccardo Panza, Wenliang Liu, Francesco Scazza

Published Aug 5, 2025• 2 citations
arXivHTMLPDF

Abstract

Abstract We report on the trapping and imaging of individual ytterbium atoms in arrays of optical tweezers, loaded from a magneto-optical trap (MOT) formed by only five beams in an orthogonal configuration. In our five-beam MOT, operating on the narrow 1 S 0 → 3 P 1 intercombination transition, gravity balances the radiation pressure of a single upward-directed beam. This approach enables efficient trapping and cooling of the most common ytterbium isotopes ( 171 Yb, 173 Yb and 174 Yb) to ≲ 20 μ K at densities ∼ 10 11 atoms cm −3 within less than one second. This configuration allows for significantly reducing the complexity of the optical setup, potentially benefiting any ytterbium-atom based quantum science platform leveraging single-atom microscopy, from quantum processors to novel optical clocks. We then demonstrate the first single-atom-resolved imaging of the fermionic, large-spin isotope 173 Yb ( I = 5 / 2 ), employing a two-color imaging scheme that does not rely on magic-wavelength trapping. We achieve a high single-atom imaging fidelity of 99.96 ( 1 ) % and a large survival probability of 98.5 ( 2 ) % , despite large differential light shifts affecting all nuclear spin sublevels of the excited 3 P

DOI
10.1088/2058-9565/adf7cf

Related papers

Magneto-Optical Trapping of Ytterbium Atoms with a 398.9 nm Laser

Zhao Peng-Yi, Xiong Zhuan-Xian, Jie Liang +2 more

We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.

Chinese Physics Letters•Oct 1, 2008•16 citations

Microsecond-Scale High-Survival and Number-Resolved Detection of Ytterbium Atom Arrays

Alessandro Muzi Falconi, Riccardo Panza, Sara Sbernardori +5 more

Scalable atom-based quantum platforms for simulation, computing, and metrology require fast high-fidelity, low-loss imaging of individual atoms. Standard fluorescence detection methods rely on continuous cooling, limiting the detection range to one atom and imposing long imaging times that constrain the experimental cycle and midcircuit conditional operations. Here, we demonstrate fast and low-loss single-atom imaging in optical tweezers without active cooling, enabled by the favorable properties of ytterbium. Collecting fluorescence over microsecond timescales, we reach single-atom discrimination fidelities above 99.9% and single-shot survival probabilities above 99.5%. Through interleaved recooling pulses, as short as a few hundred microseconds for atoms in magic traps, we perform tens of consecutive detections with constant atom-retention probability per image-an essential step toward fast atom reuse in tweezer-based processors and clocks. Our scheme does not induce parity projection in multiply occupied traps, enabling number-resolved single-shot detection of several atoms per site. This allows us to study the near-deterministic preparation of single atoms in tweezers driven by blue-detuned light-assisted collisions. Moreover, the near-diffraction-limited spatial resolution of our low-loss imaging enables number-resolved microscopy in dense arrays, opening the way to direct site-occupancy readout in optical lattices for density fluctuation and correlation measurements in quantum simulators.

arXiv:2507.01011•Physical Review Letters•Nov 13, 2025•7 citations

Single Sr Atoms in Optical Tweezer Arrays for Quantum Simulation

Veronica Giardini, Luca Guariento, Andrea Fantini +6 more

We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.

arXiv:2510.19816•Atoms•Dec 19, 2025•2 citations

Realization of Green MOT for Ytterbium Atoms

Zhao Peng-Yii, Xiong Zhuan-Xian, Yun Long +2 more

We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.

Chinese Physics Letters•Aug 1, 2009•12 citations

Single Strontium atoms trapped in optical tweezer arrays for quantum simulation

Veronica Giardini

Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.

•Jan 1, 2026•0 citations

Magneto-optical trapping of Yb atoms using an intercombination transition

剛 桑本, T. Kuwamoto, 和仁 本多 +5 more

We report the magneto-optical trapping of ytterbium atoms using the 6s2 1S0-6s6p 3P1 intercombination transition. The magneto-optical trap is continuously loaded from an atomic beam decelerated by a Zeeman-tuned atomic-beam slower operated at the 6s2 1S0-6s6p 1P1 transition. Among seven stable isotopes of ytterbium, six isotopes of 170Yb, 171Yb, 172Yb, 173Yb, 174Yb, and 176Yb are successfully trapped. The number and density of the trapped atoms are about 108 and 1011 cm-3, respectively. The temperature of atoms is estimated to be about 20 μK from the time-of-flight measurement. The decay time of the trapped atoms after stopping the loading of atoms is about 3 s.

•Aug 1, 1999•0 citations
Abstract We report on the trapping and imaging of individual ytterbium atoms in arrays of optical tweezers, loaded from a magneto-optical trap (MOT) formed by only five beams in an orthogonal configuration. In our five-beam MOT, operating on the narrow 1 S 0 → 3 P 1 intercombination transition, gravity balances the radiation pressure of a single upward-directed beam. This approach enables efficient trapping and cooling of the most common ytterbium isotopes ( 171 Yb, 173 Yb and 174 Yb) to ≲ 20 μ K at densities ∼ 10 11 atoms cm −3 within less than one second. This configuration allows for significantly reducing the complexity of the optical setup, potentially benefiting any ytterbium-atom based quantum science platform leveraging single-atom microscopy, from quantum processors to novel optical clocks. We then demonstrate the first single-atom-resolved imaging of the fermionic, large-spin isotope 173 Yb ( I = 5 / 2 ), employing a two-color imaging scheme that does not rely on magic-wavelength trapping. We achieve a high single-atom imaging fidelity of 99.96 ( 1 ) % and a large survival probability of 98.5 ( 2 ) % , despite large differential light shifts affecting all nuclear spin sublevels of the excited 3 P
We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.
Scalable atom-based quantum platforms for simulation, computing, and metrology require fast high-fidelity, low-loss imaging of individual atoms. Standard fluorescence detection methods rely on continuous cooling, limiting the detection range to one atom and imposing long imaging times that constrain the experimental cycle and midcircuit conditional operations. Here, we demonstrate fast and low-loss single-atom imaging in optical tweezers without active cooling, enabled by the favorable properties of ytterbium. Collecting fluorescence over microsecond timescales, we reach single-atom discrimination fidelities above 99.9% and single-shot survival probabilities above 99.5%. Through interleaved recooling pulses, as short as a few hundred microseconds for atoms in magic traps, we perform tens of consecutive detections with constant atom-retention probability per image-an essential step toward fast atom reuse in tweezer-based processors and clocks. Our scheme does not induce parity projection in multiply occupied traps, enabling number-resolved single-shot detection of several atoms per site. This allows us to study the near-deterministic preparation of single atoms in tweezers driven by blue-detuned light-assisted collisions. Moreover, the near-diffraction-limited spatial resolution of our low-loss imaging enables number-resolved microscopy in dense arrays, opening the way to direct site-occupancy readout in optical lattices for density fluctuation and correlation measurements in quantum simulators.
We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.
We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
We report the magneto-optical trapping of ytterbium atoms using the 6s2 1S0-6s6p 3P1 intercombination transition. The magneto-optical trap is continuously loaded from an atomic beam decelerated by a Zeeman-tuned atomic-beam slower operated at the 6s2 1S0-6s6p 1P1 transition. Among seven stable isotopes of ytterbium, six isotopes of 170Yb, 171Yb, 172Yb, 173Yb, 174Yb, and 176Yb are successfully trapped. The number and density of the trapped atoms are about 108 and 1011 cm-3, respectively. The temperature of atoms is estimated to be about 20 μK from the time-of-flight measurement. The decay time of the trapped atoms after stopping the loading of atoms is about 3 s.