We describe a simple and compact experimental setup for optical tweezer arrays of 87Rb atoms. This setup includes a compact vacuum system, a single cooling laser, a simple tweezer laser, and a flexible control system. The small vacuum system with only 40 cm length takes advantage of the high atomic flux two-dimensional magneto-optical trap (2D MOT) while maintaining a low background pressure in the 3D MOT chamber ensuring sufficient lifetime of the trapped atoms. Atom number of the laser cooled sample of 2e7 and temperature of 92 uK is achieved. The flexible control system with real-time waveform generator modules (RWG) provides precise control of all the RF devices, and enables real-time feedback control of both the global and individual beams in optical tweezer arrays. An optical tweezer array with 25x25 homogeneous traps is demonstrated. This simple and compact demo setup makes it more accessible to experimental quantum physics.
We describe a simple and compact experimental setup for optical tweezer arrays of 87Rb atoms. This setup includes a compact vacuum system, a single cooling laser, a simple tweezer laser, and a flexible control system. The small vacuum system with only 40 cm length takes advantage of the high atomic flux two-dimensional magneto-optical trap (2D MOT) while maintaining a low background pressure in the 3D MOT chamber ensuring sufficient lifetime of the trapped atoms. Atom number of the laser cooled sample of 2e7 and temperature of 92 uK is achieved. The flexible control system with real-time waveform generator modules (RWG) provides precise control of all the RF devices, and enables real-time feedback control of both the global and individual beams in optical tweezer arrays. An optical tweezer array with 25x25 homogeneous traps is demonstrated. This simple and compact demo setup makes it more accessible to experimental quantum physics.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
Abstract We outline an experimental setup for efficiently preparing a tweezer array of 88Sr atoms. Our setup uses permanent magnets to maintain a steady-state two-dimensional magneto-optical trap (MOT) which results in a loading rate of up to 108 s−1 at 5 mK for the three-dimensional blue MOT. This enables us to trap 2 × 106 88Sr atoms at 2 μK in a narrow-line red MOT with the 1S0 → 3P1 intercombination transition at 689 nm. With the Sisyphus cooling and pairwise loss processes, single atoms are trapped and imaged in 813 nm optical tweezers, exhibiting a lifetime of 2.5 min. We further investigate the survival fraction of a single atom in the tweezers and characterize the optical tweezer array using a release and recapture technique. Our experimental setup serves as an excellent reference for those engaged in experiments involving optical tweezer arrays, cold atom systems, and similar research.
We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.
In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.
We report on the design, implementation, and performance of a compact two-dimensional magneto-optical trap (2D MOT) for cesium. In a small-volume vacuum chamber, the setup uses cesium dispensers in close proximity to the trapping region of the 2D MOT and operates at low vapor pressures in the 10−9 torr range. We achieve a cold atom flux of 4×108 atoms/s that is comparable to the performance of more complex atomic sources. The setup is simple to construct and can be adapted to a broad range of atomic species.
Abstract We describe a three-dimensional (3D) magneto-optical trap (MOT) capable of simultaneously capturing 85Rb and 133Cs atoms. Unlike conventional setups, our system utilizes two separate laser systems that are combined before entering the vacuum chamber, enabling the simultaneous trapping of two different atomic species. We trapped 85Rb and 133Cs atoms using relatively low total power: 8 mW cooling and 4 mW repump for 85Rb, and 7.5 mW cooling and 1.5 mW repump for 133Cs. The number of trapped atoms was 1.6 × 108 for 85Rb and 1.4 × 108 for 133Cs. The optical depths were 3.71 for 85Rb and 3.45 for 133Cs. The temperature of trapped atoms was ∼200 μK for 85Rb and ∼200 μK for 133Cs. Our 3D MOT setup allows full horizontal optical access to the trapped atomic ensembles without spatial interference from the trapping or repump laser beams. Our vacuum system is also quite simple, avoiding much of the complexity typically encountered in similar dual-species systems. However, the red detuning of the cooling laser used for atomic trapping in our system is relatively small, leaving room for further optimization. This system offers a versatile platform for exploring complex phenomena in ultracold atom physics, such as Rydberg molecule formation and interspecies interactions.