Quantum computation of the energy of molecules and materials is one of the most promising applications of fault-tolerant quantum computers. Practical applications require development of quantum algorithms with reduced resource requirements. Previous work has mainly focused on quantum algorithms where the Hamiltonian is represented in second quantization with compact basis sets while existing methods in first quantization are limited to a grid-based basis. In this work, we present a new method to solve the generic ground-state chemistry problem in first quantization using any basis set. We achieve asymptotic speedup in Toffoli count for molecular orbitals, and orders of magnitude improvement using dual plane waves as compared to the second quantization counterparts. In some instances, our approach provides similar or even lower resources compared to previous first quantization plane wave algorithms that, unlike our approach, avoids the loading of the classical data. The developed methodology can be applied to variety of applications, where the matrix elements of a first quantized Hamiltonian lack simple circuit representation.
Quantum computation of the energy of molecules and materials is one of the most promising applications of fault-tolerant quantum computers. Practical applications require development of quantum algorithms with reduced resource requirements. Previous work has mainly focused on quantum algorithms where the Hamiltonian is represented in second quantization with compact basis sets while existing methods in first quantization are limited to a grid-based basis. In this work, we present a new method to solve the generic ground-state chemistry problem in first quantization using any basis set. We achieve asymptotic speedup in Toffoli count for molecular orbitals, and orders of magnitude improvement using dual plane waves as compared to the second quantization counterparts. In some instances, our approach provides similar or even lower resources compared to previous first quantization plane wave algorithms that, unlike our approach, avoids the loading of the classical data. The developed methodology can be applied to variety of applications, where the matrix elements of a first quantized Hamiltonian lack simple circuit representation.
The quantum simulation of real molecules and materials is one of the most highly anticipated applications of quantum computing. Algorithms for simulating electronic structure using a first-quantized plane-wave representation are especially promising due to their asymptotic efficiency. However, previous proposals for preparing initial states for these simulation algorithms scale poorly with the size of the basis set. We address this shortcoming by showing how to efficiently map states defined in a Gaussian-type orbital basis to a plane-wave basis with a scaling that is logarithmic in the number of plane waves. Our key technical result is a proof that molecular orbitals constructed from Gaussian-type basis functions can be compactly represented in a plane-wave basis using matrix product states. While we expect that other approaches could achieve the same logarithmic scaling with respect to basis-set size, our proposed state-preparation technique is also highly efficient in practice. For example, in a series of numerical experiments on small molecules, we find that our approach allows us to prepare an approximation to the Hartree-Fock state using orders of magnitude fewer non-Clifford gates than a naive approach. By resolving the issue of state preparation, our work allows for the first quantum simulation of molecular systems the end-to-end complexity of which is truly sublinear in the basis-set size.
With quantum computers on the horizon, it is essential to understand what problems they can be used to solve. One potential application is simulating quantum systems, in particular, systems with many interacting electrons. However, there is a disparity between the computational resources required to study these problems and the capabilities of modern experimental quantum devices. In this thesis, we make progress toward closing this gap by reducing the cost of quantum simulation of quantum chemistry on a number of fronts. In the first half, we develop three improved quantum simulation algorithms by approximating time evolution under the Hamiltonian using a truncated Taylor series rather than the Trotter-Suzuki decomposition. We do this first for the molecular electronic structure Hamiltonian in two representations, obtaining asymptotic improvements in terms of both the number of orbitals and the required precision. We also apply the truncated Taylor series paradigm to quantum simulation in real space, where we consider simulation of general wave functions discretized on a uniform grid. In the second half, by working with Hamiltonians tailored specifically to quantum algorithms, we demonstrate that Trotter steps of the electronic structure Hamiltonian can be simulated in exactly N depth and with only linear connectivity, where N is the number of spin-orbitals. This resolves the problem of non-locality in fermion-to-qubit mappings, and has wide-ranging applications for variational and phase estimation-based quantum simulation of quantum chemistry. We further study this algorithm on an error-corrected quantum computer using the surface code. Benchmarking it alongside other product formula approaches, we show that quantum simulation of scientifically important instances of the electronic structure problem that are classically intractable can be performed with only a few hundred thousand physical qubits and fewer than one billion costly fault-tolerant gates. Finally, we study the effect of using randomized Hamiltonians in iterative phase estimation, and how this allows us to reduce the costs of simulation as well as to exploit knowledge of the ground state in how we design our simulation algorithm.
In quantum chemistry, the "electronic structure problem" refers to the process of numerically solving Schrodinger's equation for a given molecular system. These calculations rank among the most CPU-intensive computations that are performed nowadays, yet they are also crucial to the design of new drugs and materials. The idea behind quantum simulation of quantum chemistry is that a quantum computer could perform such calculations in a manner that is exponentially more efficient than what a classical computer could accomplish. In fact, quantum simulation is quite possibly the application most naturally suited to a quantum computer. In this work we introduce novel algorithms for the simulation of quantum chemistry, algorithms that are exponentially more precise than previous algorithms in the literature. Previous algorithms are based on the Trotter-Suzuki decomposition and scale like the inverse of the desired precision, while our algorithms represent the first practical application of the recently developed truncated Taylor series approach, and they achieve scaling that is logarithmic in the inverse of the precision. We explore algorithms for both second-quantized and first-quantized encodings of the chemistry Hamiltonian, where the second-quantized encoding requires mathcalO(N) qubits for an N spin-orbital system, and the highly compressed first-quantized encoding requires mathcalO(eta) qubits, where eta<<N is the number of electrons in the system. We first introduce a second-quantized algorithm that uses pre-computed molecular integrals, resulting in a gate count that scales like widetildecalO(N8t). Next we introduce algorithms that compute molecular integrals on the fly by carefully discretizing these integrals. Indeed, figuring out how to evaluate the integrals in an efficient manner is one of the main challenges of applying the truncated Taylor series approach to the chemistry problem: the complexity of a general quantum algorithm is traditionally formulated in terms of the number of queries made to an oracle whose assumption we just assume, but in this case, we actually construct the oracle for our specific problem. The evaluation of the oracle itself requires evaluating molecular integrals, which adds additional complexity to an algorithm. We find that the gate count of the second-quantized on-the-fly algorithm scales like widetildecalO(N5t). We also find that the first-quantized on-the-fly algorithm, which uses the configuration interaction (CI) matrix representation of the Hamiltonian, requires at most widetildecalO(eta2N3t) gates. In general, the discovery of exponentially more precise algorithms will allow for the simulation of larger molecular systems than was previously possible under Trotter-based methods. In addition, the results here can be generalized to the simulation of other fermionic systems beyond the electronic structure problem.
Complex quantum simulation workflows are often hindered by incompatible wavefunction representations adopted across different algorithmic frameworks. In particular, the mismatch between the first- and second-quantization formalisms prevents algorithms specialized for their respective quantizations from being integrated within a single circuit, thereby forcing practitioners to rely on suboptimal methods simply to maintain a consistent representation. To address this challenge, we propose a hybrid quantization scheme that employs a conversion circuit to switch between the two, requiring O(NlogNlogM) gates for a system of N electrons and M orbitals. This capability is critical for constructing complex quantum simulation workflows, allowing us to use the most efficient quantization for each individual step. We discuss its applications to bring polynomial improvements in the characterization of ground-state, ab-initio molecular dynamics, and characterization of spectroscopic properties. Quantitative estimations of such applications found up to three orders of magnitude fewer ground-state preparations when measuring the 2-reduced density matrix of molecular systems. Quantum simulations are often limited by incompatible wavefunction representations across different algorithmic frameworks, hindering efficient integration. Here, the authors introduce a hybrid quantization scheme that efficiently converts between first and second quantization formalisms, significantly reducing the computational costs of electronic simulations, with potential applications in various chemical and physical processes.
Simulations of chemical dynamics are a powerful means for understanding chemistry. However, classical computers struggle to simulate many chemical processes, especially non-adiabatic ones, where the Born-Oppenheimer approximation breaks down. Quantum computers could simulate quantum-chemical dynamics more efficiently than classical computers, but there is currently no complete quantum algorithm for calculating dynamical observables to within a known error. Here, we develop an efficient, end-to-end quantum algorithm for simulating chemical dynamics that avoids all uncontrolled approximations (including the Born-Oppenheimer approximation) and whose error is bounded subject to mild assumptions. To do so, we treat the nuclei and the electrons on an equal footing and simulate the full molecular wavefunction on a momentum-space grid in first quantization, including all algorithmic steps: initial-state preparation, time evolution using qubitization, and measurement of chemical observables such as reaction yields and rates. Our work gives the first algorithm for quantum simulation of chemistry whose end-to-end complexity achieves sublinear scaling in the size of the grid. We achieve this by developing an exponentially faster method for initial-state-preparation. Photochemistry is a likely early application of our algorithm and we estimate resources required for end-to-end simulations of non-adiabatic dynamics of atmospherically important molecules. Classically intractable photochemical computations could be performed using resources comparable to those required for other chemical applications of quantum computing.
In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.