Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2407.18746 · Physical Review Applied

Mitigating losses of superconducting qubits strongly coupled to defect modes

Dante Colao Zanuz, Quentin Ficheux, Laurent Michaud, Alexei Orekhov, Kilian Hanke, Alexander Flasby, Mohsen Bahrami Panah, Graham J. Norris, Michael Kerschbaum, Ants Remm, François Swiadek, Christoph Hellings, Stefania Lazar, Colin Scarato, Nathan Lacroix, Sebastian Krinner, Christopher Eichler, Andreas J. Wallraff, Jean-Claude Besse

Published Apr 24, 2025• 17 citations
arXivHTMLPDF

Abstract

The dominant contribution to the energy relaxation of state-of-the-art superconducting qubits is often attributed to their coupling to an ensemble of material defects which behave as two-level systems. These defects have varying microscopic characteristics which result in a wide range of observable defect properties such as resonant frequencies, coherence times, and coupling rates to qubits $g$. Here, we investigate strategies to mitigate losses to the family of defects that strongly couple to qubits ($g/2\ensuremath{\pi}\ensuremath{\ge}0.5\mathrm{M}\mathrm{Hz}$). Such strongly coupled defects occur more rarely and are particularly detrimental to the qubit coherence when resonant with the qubit, and to the fidelities of operations relying on frequency excursions, such as flux-activated two-qubit gates. To assess their impact, we perform swap spectroscopy on 92 frequency-tunable qubits and quantify the spectral density of these strongly coupled modes. We show that the frequency configuration of the defects is rearranged by warming the sample to room temperature, whereas the total number of defects on a processor tends to remain constant. We then explore methods for fabricating qubits with a reduced number of strongly coupled defect modes by systematically measuring their spectral density for decreasing Josephson junction dimensions and for various surface cleaning methods. Our results provide insights into the properties of strongly coupled defect modes and show the benefits of minimizing Josephson junction dimensions to improve qubit properties.

DOI
10.1103/physrevapplied.23.044054

Related papers

Statistics of strongly coupled defects in superconducting qubits

S. Weeden, D.C. Harrison, S. Patel +8 more

Decoherence in superconducting qubits is dominated by defects that reside at amorphous interfaces. Interaction with discrete defects results in dropouts that complicate qubit operation and lead to non-Gaussian tails in the distribution of qubit energy relaxation time T 1 that degrade system performance. Spectral diffusion of defects over time leads to fluctuations in T 1 , posing a challenge for calibration. In this work, we measure the energy relaxation of flux-tunable transmons over a range of operating frequencies. We vary qubit geometry to change the interface participation ratio by more than an order of magnitude. Our results are consistent with loss dominated by discrete interfacial defects. Moreover, we are able to localize the dominant defects to within 500 nm of the qubit junctions, where residues from liftoff are present. These results motivate alternative approaches to qubit junction fabrication that avoid the residues intrinsic to the liftoff process.

arXiv:2506.00193•Physical Review Applied•Mar 3, 2026•2 citations

Sub-MHz SWAP spectroscopy of two-level systems in superconducting qubits

Joaquin Minguzzi, John Clai Owens, Oskar Painter +2 more

An outstanding challenge in superconducting quantum circuits is mitigating loss from two-level system (TLS) defects. SWAP spectroscopy with flux-tunable qubits can detect individual TLSs, but the Rabi chevrons that signal coherent exchange have been observed only for the most strongly coupled defects. Here, we introduce a sequence with fast flux pulses only at state preparation and readout, switched off during the energy-relaxation delay for finer frequency resolution and longer interaction times. We detect Rabi chevrons at swap rates as low as 0.1 MHz, an order of magnitude lower than previously reported. In the dressed-state picture, we fit the coherent swap oscillations to extract the TLS energy-relaxation time. These Rabi chevrons reveal coherent TLSs with a median energy-relaxation time of 10 microseconds, at coupling strengths previously associated with incoherent TLSs. The swap coherence times exceed the qubit T2* limited by flux noise, indicating that the dressed gap protects them from low-frequency 1/f noise.

quant-pharXiv:2610.11125•Oct 9, 2026•0 citations

Characterization of Loss Mechanisms in a Fluxonium Qubit

Hantao Sun, Feng Wu, Hsiang‐Sheng Ku +9 more

Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values. The relaxation rate at qubit energy values, ranging more than 1 order of magnitude around the thermal energy ${k}_{B}T$, can be quantitatively explained by a combination of dielectric loss and $1/f$ flux noise with a crossover point. The amplitude of the $1/f$ flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arising from the electric dipole interaction with two-level-system (TLS) defects. In particular, by increasing the Josephson energy, thus decreasing the qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects, which is desirable for high-fidelity quantum operations. Our work establishes a generic noise model for the design of high coherence fluxonium and future generations of noise resilient superconducting qubits.

arXiv:2302.08110•Physical Review Applied•Sep 8, 2023•23 citations

Stabilizing and Improving Qubit Coherence by Engineering the Noise Spectrum of Two-Level Systems

Xinyuan You, Ziwen Huang, Uğur Alyanak +3 more

Superconducting circuits are a leading platform for quantum computing. However, their coherence times are still limited and exhibit temporal fluctuations. Those phenomena are often attributed to the coupling between qubits and material defects that can be well described as an ensemble of two-level systems (TLSs). Among them, charge fluctuators inside amorphous oxide layers contribute to both low-frequency $1/f$ charge noise and high-frequency dielectric loss, causing fast qubit dephasing and relaxation. Moreover, spectral diffusion from mutual TLS interactions varies the noise amplitude over time, fluctuating the qubit lifetime. Here, we propose to mitigate those harmful effects by engineering the relevant TLS noise spectral densities. Specifically, our protocols smooth the high-frequency noise spectrum and suppress the low-frequency noise amplitude via depolarizing and dephasing the TLSs, respectively. As a result, we predict a drastic stabilization in qubit lifetime and an increase in qubit pure dephasing time. Our detailed analysis of feasible experimental implementations shows that the improvement is not compromised by spurious coupling from the applied noise to the qubit.

arXiv:2206.10669•Physical Review Applied•Oct 11, 2022•16 citations

Simulating noise on a quantum processor: interactions between a qubit and resonant two-level system bath

Yujin Cho, Dipti Jasrasaria, Keith G. Ray +4 more

Abstract Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantum system dynamics, and draws from the current understanding of two-level system (TLS) theory. Specifically, we start with one million TLSs distributed on the surface of a qubit and pick the 200 systems that are most strongly coupled to the qubit. We then perform a full Lindbladian simulation that explicitly includes the coherent coupling between the qubit and the TLS bath to model the time dependent density matrix of resonant TLS defects and the qubit. We find that the 200 most strongly coupled TLSs can accurately describe the qubit energy relaxation time. This work confirms that resonant TLSs located in areas where the electric field is strong can significantly affect the qubit relaxation time, even if they are located far from the Josephson junction (JJ). Similarly, a strongly-coupled resonant TLS located in the JJ does not guarantee a reduced qubit relaxation time if a more strongly coupled TLS is far from the JJ. In addition to the coupling strengths between TLSs and the qubit, the model predicts that the geometry of the device and the TLS relaxation time play a significant role in qubit dynamics. Our work can provide guidance for future quantum processor designs with improved qubit coherence times.

arXiv:2211.08535•Quantum Science and Technology•Sep 4, 2023•10 citations

Electric field spectroscopy of material defects in transmon qubits

Jürgen Lisenfeld, Alexander Bilmes, A. Megrant +6 more

Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only $$\approx$$ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

arXiv:1909.09749•npj Quantum Information•Nov 22, 2019•162 citations
The dominant contribution to the energy relaxation of state-of-the-art superconducting qubits is often attributed to their coupling to an ensemble of material defects which behave as two-level systems. These defects have varying microscopic characteristics which result in a wide range of observable defect properties such as resonant frequencies, coherence times, and coupling rates to qubits ggg. Here, we investigate strategies to mitigate losses to the family of defects that strongly couple to qubits (g/2\ensuremathπ\ensuremath≥0.5MHzg/2\ensuremath{\pi}\ensuremath{\ge}0.5\mathrm{M}\mathrm{Hz}g/2\ensuremathπ\ensuremath≥0.5MHz). Such strongly coupled defects occur more rarely and are particularly detrimental to the qubit coherence when resonant with the qubit, and to the fidelities of operations relying on frequency excursions, such as flux-activated two-qubit gates. To assess their impact, we perform swap spectroscopy on 92 frequency-tunable qubits and quantify the spectral density of these strongly coupled modes. We show that the frequency configuration of the defects is rearranged by warming the sample to room temperature, whereas the total number of defects on a processor tends to remain constant. We then explore methods for fabricating qubits with a reduced number of strongly coupled defect modes by systematically measuring their spectral density for decreasing Josephson junction dimensions and for various surface cleaning methods. Our results provide insights into the properties of strongly coupled defect modes and show the benefits of minimizing Josephson junction dimensions to improve qubit properties.
Decoherence in superconducting qubits is dominated by defects that reside at amorphous interfaces. Interaction with discrete defects results in dropouts that complicate qubit operation and lead to non-Gaussian tails in the distribution of qubit energy relaxation time T 1 that degrade system performance. Spectral diffusion of defects over time leads to fluctuations in T 1 , posing a challenge for calibration. In this work, we measure the energy relaxation of flux-tunable transmons over a range of operating frequencies. We vary qubit geometry to change the interface participation ratio by more than an order of magnitude. Our results are consistent with loss dominated by discrete interfacial defects. Moreover, we are able to localize the dominant defects to within 500 nm of the qubit junctions, where residues from liftoff are present. These results motivate alternative approaches to qubit junction fabrication that avoid the residues intrinsic to the liftoff process.
An outstanding challenge in superconducting quantum circuits is mitigating loss from two-level system (TLS) defects. SWAP spectroscopy with flux-tunable qubits can detect individual TLSs, but the Rabi chevrons that signal coherent exchange have been observed only for the most strongly coupled defects. Here, we introduce a sequence with fast flux pulses only at state preparation and readout, switched off during the energy-relaxation delay for finer frequency resolution and longer interaction times. We detect Rabi chevrons at swap rates as low as 0.1 MHz, an order of magnitude lower than previously reported. In the dressed-state picture, we fit the coherent swap oscillations to extract the TLS energy-relaxation time. These Rabi chevrons reveal coherent TLSs with a median energy-relaxation time of 10 microseconds, at coupling strengths previously associated with incoherent TLSs. The swap coherence times exceed the qubit T2* limited by flux noise, indicating that the dressed gap protects them from low-frequency 1/f noise.
Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values. The relaxation rate at qubit energy values, ranging more than 1 order of magnitude around the thermal energy kBT{k}_{B}TkB​T, can be quantitatively explained by a combination of dielectric loss and 1/f1/f1/f flux noise with a crossover point. The amplitude of the 1/f1/f1/f flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arising from the electric dipole interaction with two-level-system (TLS) defects. In particular, by increasing the Josephson energy, thus decreasing the qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects, which is desirable for high-fidelity quantum operations. Our work establishes a generic noise model for the design of high coherence fluxonium and future generations of noise resilient superconducting qubits.
Superconducting circuits are a leading platform for quantum computing. However, their coherence times are still limited and exhibit temporal fluctuations. Those phenomena are often attributed to the coupling between qubits and material defects that can be well described as an ensemble of two-level systems (TLSs). Among them, charge fluctuators inside amorphous oxide layers contribute to both low-frequency 1/f1/f1/f charge noise and high-frequency dielectric loss, causing fast qubit dephasing and relaxation. Moreover, spectral diffusion from mutual TLS interactions varies the noise amplitude over time, fluctuating the qubit lifetime. Here, we propose to mitigate those harmful effects by engineering the relevant TLS noise spectral densities. Specifically, our protocols smooth the high-frequency noise spectrum and suppress the low-frequency noise amplitude via depolarizing and dephasing the TLSs, respectively. As a result, we predict a drastic stabilization in qubit lifetime and an increase in qubit pure dephasing time. Our detailed analysis of feasible experimental implementations shows that the improvement is not compromised by spurious coupling from the applied noise to the qubit.
Abstract Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantum system dynamics, and draws from the current understanding of two-level system (TLS) theory. Specifically, we start with one million TLSs distributed on the surface of a qubit and pick the 200 systems that are most strongly coupled to the qubit. We then perform a full Lindbladian simulation that explicitly includes the coherent coupling between the qubit and the TLS bath to model the time dependent density matrix of resonant TLS defects and the qubit. We find that the 200 most strongly coupled TLSs can accurately describe the qubit energy relaxation time. This work confirms that resonant TLSs located in areas where the electric field is strong can significantly affect the qubit relaxation time, even if they are located far from the Josephson junction (JJ). Similarly, a strongly-coupled resonant TLS located in the JJ does not guarantee a reduced qubit relaxation time if a more strongly coupled TLS is far from the JJ. In addition to the coupling strengths between TLSs and the qubit, the model predicts that the geometry of the device and the TLS relaxation time play a significant role in qubit dynamics. Our work can provide guidance for future quantum processor designs with improved qubit coherence times.
Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only ≈\approx≈ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.