Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.19435 · Physical Review Applied

Simple high-saturation-power quantum-limited rf-SQUID-array-based Josephson parametric amplifiers

Ryan Kaufman, Chenxu Liu, Katarina Cicak, Boris Mesits, Mingkang Xia, Chao Zhou, Maria Nowicki, José Aumentado, David Pekker, Michael Hatridge

Published Jul 29, 2025• 5 citations
arXivHTMLPDF

Abstract

High-fidelity quantum nondemolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. Maximizing high-fidelity dispersive readout in superconducting qubits commonly requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed an amplifier design pipeline that combines time-domain simulation of the untruncated device Hamiltonian, fabrication constraints, and maximization of saturation power. We have realized an amplifier based on a modified trilayer (Nb-Al-${\mathrm{Al}\mathrm{O}}_{x}$-Nb) fabrication suite at NIST, which utilizes an array of 25 rf superconducting quantum interference devices embedded within a low-$Q$ resonator powered by a high-power voltage pump delivered via a diplexer on the signal port. We show that, despite the intensity of the pump, the device is quantum efficient and capable of high-fidelity measurement limited by state transitions in the transmon. We present experimental data demonstrating up to $\ensuremath{-}91.2\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$ input saturation power with 20-$dB$ gain, up to 28-MHz instantaneous bandwidth, and phase-preserving qubit measurements with $62\mathrm{%}$ quantum efficiency.

DOI
10.1103/physrevapplied.24.014052

Related papers

Josephson parametric amplifier with Chebyshev gain profile and high saturation

Ryan Kaufman, T. White, M. I. Dykman +10 more

We demonstrate a Josephson parametric amplifier design with a band-pass impedance-matching network based on a third-order Chebyshev prototype. We measured eight amplifiers operating at 4.6 GHz that exhibit gains of 20 dB with less than 1-dB gain ripple and bandwidth up to 500 MHz. The amplifiers further achieve high-output-saturation powers around $\ensuremath{-}73\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$ based on the use of rf superconducting quantum interference device arrays as their nonlinear element. We characterize the system readout efficiency and its signal-to-noise ratio near saturation using a Sycamore processor, finding the data consistent with near quantum limited noise performance of the amplifiers. In addition, we measure the amplifiers' intermodulation distortion in two-tone experiments as a function of input power and intertone detuning, and observe excess distortion at small detuning with a pronounced dip as a function of signal power, which we interpret in terms of power-dependent dielectric losses.

arXiv:2305.17816•Physical Review Applied•Nov 28, 2023•32 citations

Circuit Design and Experimental Characterization of a Josephson Traveling-Wave Parametric Amplifier

Christoph Kissling

Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.

•Feb 24, 2026•0 citations

Readout of a quantum processor with high dynamic range Josephson parametric amplifiers

T. White, Alex Opremcak, George Sterling +91 more

We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 Ω environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250–300 MHz with input saturation powers up to −95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimation of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Finally, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs.

arXiv:2209.07757•Applied Physics Letters•Jan 2, 2023•45 citations

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Joel Grebel, Audrey Bienfait, Étienne Dumur +7 more

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

Applied Physics Letters•Apr 5, 2021•53 citations

rf-SQUID-based traveling-wave parametric amplifier with input saturation power of − 84 dBm across more than one octave in bandwidth

Victor Gaydamachenko, Christoph Kissling, Lukas Grünhaupt

Traveling-wave parametric amplifiers (TWPAs) have become an essential tool for the readout of quantum circuits and the search for dark matter. We report on the implementation of an rf-superconducting quantum interference device (SQUID)-based Josephson TWPA with an average saturation power of −84 dBm while providing an average power gain of 20 dB from 3.5 to 8.5 GHz. This wide bandwidth is enabled by reducing the curvature of the dispersion in the signal band while suppressing detrimental mixing processes. With 2393 rf-SQUIDs, our device has a comparable number of nonlinear elements but achieves ten times higher saturation power than previously reported devices. This shows that using rf-SQUIDs results in a more favorable trade-off between device length and saturation power. Harnessing wideband characterization techniques, we determine the TWPA’s excess noise above the quantum limit to be 0.8 to 1.5 photons. In addition, we validate the signal-to-noise ratio improvement as a practical measure for tuning the TWPA to minimize the total system noise and demonstrate that its optimum does not coincide with the highest gain.

arXiv:2503.02489•Physical Review Applied•May 22, 2025•12 citations

Amplification paramétrique en résonance et à ondes progressives proche de la limite quantique

Luca Planat

A requirement for quantum information experiments using superconducting quantum circuits is the readout of extremely weak microwave signals. Quantum limited amplifiers are essential for such task and this is precisely why they occupy an always-growing importance in such experiments, particularly for superconducting quantum bits readout.In this thesis, we present two quantum limited amplifiers architectures: the first one is based on a resonator while the second one leverages a traveling-wave construction. These amplifiers both take advantage of tunable Josephson junctions (squid). It is the ideal component for quantum limited parametric amplification: it is both nonlinear and dissipationless (given its superconducting nature). This thesis demonstrates the operation of these Josephson quantum limited amplifiers and how they go beyond the state-of-the-art thanks to original design choices.An important limitation of resonant Josephson parametric amplifiers is their poor dynamic range. We identified the Kerr nonlinearity as the main cause, and we successfully managed to tailor it using Josephson junction arrays. We also developed a model in good agreement with the experimental data, therefore validating our initial assumption that the Kerr nonlinearity and saturation are linked. However, most of the resonant Josephson parametric amplifiers suffer from a fundamental issue, arising from their architecture. It is the conservation of the gain bandwidth product, therefore limiting their bandwidth. Traveling-wave architectures are well suited to overcome this limitation. However, two new issues must be dealt with: impedance matching and phase matching. To tackle the former, we developed an original and simple fabrication process in order to obtain a 50ohm matched 2000 squid array. As for the phase, we matched it by periodically modulating the impedance of the squid transmission line in order to open a photonic band gap. Therefore, we locally distort the dispersion relation. This step does not add any complexity to the initial fabrication process. Moreover, we developed a model in good agreement with experimental data while considering the nonlinear behavior of the photonic gap in a Josephson metamaterial. In addition to demonstrating high performance amplifiers poised for numerous quantum technological applications, this thesis opens the door to more fundamental quantum optics experiments taking advantage of these highly nonlinear transmission lines.With the resonant amplifiers, we measured a 1dB compression point around -117dBm and 45MHz bandwidth (at 20 db gain). With the traveling-wave amplifiers, we measured 18dB gain on a 2.25GHz bandwidth, a 1dB compression point reaching -103dBm and near quantum-limited noise performances.

•Jun 22, 2020•0 citations
High-fidelity quantum nondemolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. Maximizing high-fidelity dispersive readout in superconducting qubits commonly requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed an amplifier design pipeline that combines time-domain simulation of the untruncated device Hamiltonian, fabrication constraints, and maximization of saturation power. We have realized an amplifier based on a modified trilayer (Nb-Al-AlOx{\mathrm{Al}\mathrm{O}}_{x}AlOx​-Nb) fabrication suite at NIST, which utilizes an array of 25 rf superconducting quantum interference devices embedded within a low-QQQ resonator powered by a high-power voltage pump delivered via a diplexer on the signal port. We show that, despite the intensity of the pump, the device is quantum efficient and capable of high-fidelity measurement limited by state transitions in the transmon. We present experimental data demonstrating up to \ensuremath−91.2dBm\ensuremath{-}91.2\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}\ensuremath−91.2dBm input saturation power with 20-dBdBdB gain, up to 28-MHz instantaneous bandwidth, and phase-preserving qubit measurements with 62\mathrm{%} quantum efficiency.
We demonstrate a Josephson parametric amplifier design with a band-pass impedance-matching network based on a third-order Chebyshev prototype. We measured eight amplifiers operating at 4.6 GHz that exhibit gains of 20 dB with less than 1-dB gain ripple and bandwidth up to 500 MHz. The amplifiers further achieve high-output-saturation powers around $\ensuremath{-}73\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$ based on the use of rf superconducting quantum interference device arrays as their nonlinear element. We characterize the system readout efficiency and its signal-to-noise ratio near saturation using a Sycamore processor, finding the data consistent with near quantum limited noise performance of the amplifiers. In addition, we measure the amplifiers' intermodulation distortion in two-tone experiments as a function of input power and intertone detuning, and observe excess distortion at small detuning with a pronounced dip as a function of signal power, which we interpret in terms of power-dependent dielectric losses.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 Ω environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250–300 MHz with input saturation powers up to −95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimation of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Finally, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs.
Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.
Traveling-wave parametric amplifiers (TWPAs) have become an essential tool for the readout of quantum circuits and the search for dark matter. We report on the implementation of an rf-superconducting quantum interference device (SQUID)-based Josephson TWPA with an average saturation power of −84 dBm while providing an average power gain of 20 dB from 3.5 to 8.5 GHz. This wide bandwidth is enabled by reducing the curvature of the dispersion in the signal band while suppressing detrimental mixing processes. With 2393 rf-SQUIDs, our device has a comparable number of nonlinear elements but achieves ten times higher saturation power than previously reported devices. This shows that using rf-SQUIDs results in a more favorable trade-off between device length and saturation power. Harnessing wideband characterization techniques, we determine the TWPA’s excess noise above the quantum limit to be 0.8 to 1.5 photons. In addition, we validate the signal-to-noise ratio improvement as a practical measure for tuning the TWPA to minimize the total system noise and demonstrate that its optimum does not coincide with the highest gain.
A requirement for quantum information experiments using superconducting quantum circuits is the readout of extremely weak microwave signals. Quantum limited amplifiers are essential for such task and this is precisely why they occupy an always-growing importance in such experiments, particularly for superconducting quantum bits readout.In this thesis, we present two quantum limited amplifiers architectures: the first one is based on a resonator while the second one leverages a traveling-wave construction. These amplifiers both take advantage of tunable Josephson junctions (squid). It is the ideal component for quantum limited parametric amplification: it is both nonlinear and dissipationless (given its superconducting nature). This thesis demonstrates the operation of these Josephson quantum limited amplifiers and how they go beyond the state-of-the-art thanks to original design choices.An important limitation of resonant Josephson parametric amplifiers is their poor dynamic range. We identified the Kerr nonlinearity as the main cause, and we successfully managed to tailor it using Josephson junction arrays. We also developed a model in good agreement with the experimental data, therefore validating our initial assumption that the Kerr nonlinearity and saturation are linked. However, most of the resonant Josephson parametric amplifiers suffer from a fundamental issue, arising from their architecture. It is the conservation of the gain bandwidth product, therefore limiting their bandwidth. Traveling-wave architectures are well suited to overcome this limitation. However, two new issues must be dealt with: impedance matching and phase matching. To tackle the former, we developed an original and simple fabrication process in order to obtain a 50ohm matched 2000 squid array. As for the phase, we matched it by periodically modulating the impedance of the squid transmission line in order to open a photonic band gap. Therefore, we locally distort the dispersion relation. This step does not add any complexity to the initial fabrication process. Moreover, we developed a model in good agreement with experimental data while considering the nonlinear behavior of the photonic gap in a Josephson metamaterial. In addition to demonstrating high performance amplifiers poised for numerous quantum technological applications, this thesis opens the door to more fundamental quantum optics experiments taking advantage of these highly nonlinear transmission lines.With the resonant amplifiers, we measured a 1dB compression point around -117dBm and 45MHz bandwidth (at 20 db gain). With the traveling-wave amplifiers, we measured 18dB gain on a 2.25GHz bandwidth, a 1dB compression point reaching -103dBm and near quantum-limited noise performances.