A requirement for quantum information experiments using superconducting quantum circuits is the readout of extremely weak microwave signals. Quantum limited amplifiers are essential for such task and this is precisely why they occupy an always-growing importance in such experiments, particularly for superconducting quantum bits readout.In this thesis, we present two quantum limited amplifiers architectures: the first one is based on a resonator while the second one leverages a traveling-wave construction. These amplifiers both take advantage of tunable Josephson junctions (squid). It is the ideal component for quantum limited parametric amplification: it is both nonlinear and dissipationless (given its superconducting nature). This thesis demonstrates the operation of these Josephson quantum limited amplifiers and how they go beyond the state-of-the-art thanks to original design choices.An important limitation of resonant Josephson parametric amplifiers is their poor dynamic range. We identified the Kerr nonlinearity as the main cause, and we successfully managed to tailor it using Josephson junction arrays. We also developed a model in good agreement with the experimental data, therefore validating our initial assumption that the Kerr nonlinearity and saturation are linked. However, most of the resonant Josephson parametric amplifiers suffer from a fundamental issue, arising from their architecture. It is the conservation of the gain bandwidth product, therefore limiting their bandwidth. Traveling-wave architectures are well suited to overcome this limitation. However, two new issues must be dealt with: impedance matching and phase matching. To tackle the former, we developed an original and simple fabrication process in order to obtain a 50ohm matched 2000 squid array. As for the phase, we matched it by periodically modulating the impedance of the squid transmission line in order to open a photonic band gap. Therefore, we locally distort the dispersion relation. This step does not add any complexity to the initial fabrication process. Moreover, we developed a model in good agreement with experimental data while considering the nonlinear behavior of the photonic gap in a Josephson metamaterial. In addition to demonstrating high performance amplifiers poised for numerous quantum technological applications, this thesis opens the door to more fundamental quantum optics experiments taking advantage of these highly nonlinear transmission lines.With the resonant amplifiers, we measured a 1dB compression point around -117dBm and 45MHz bandwidth (at 20 db gain). With the traveling-wave amplifiers, we measured 18dB gain on a 2.25GHz bandwidth, a 1dB compression point reaching -103dBm and near quantum-limited noise performances.
A requirement for quantum information experiments using superconducting quantum circuits is the readout of extremely weak microwave signals. Quantum limited amplifiers are essential for such task and this is precisely why they occupy an always-growing importance in such experiments, particularly for superconducting quantum bits readout.In this thesis, we present two quantum limited amplifiers architectures: the first one is based on a resonator while the second one leverages a traveling-wave construction. These amplifiers both take advantage of tunable Josephson junctions (squid). It is the ideal component for quantum limited parametric amplification: it is both nonlinear and dissipationless (given its superconducting nature). This thesis demonstrates the operation of these Josephson quantum limited amplifiers and how they go beyond the state-of-the-art thanks to original design choices.An important limitation of resonant Josephson parametric amplifiers is their poor dynamic range. We identified the Kerr nonlinearity as the main cause, and we successfully managed to tailor it using Josephson junction arrays. We also developed a model in good agreement with the experimental data, therefore validating our initial assumption that the Kerr nonlinearity and saturation are linked. However, most of the resonant Josephson parametric amplifiers suffer from a fundamental issue, arising from their architecture. It is the conservation of the gain bandwidth product, therefore limiting their bandwidth. Traveling-wave architectures are well suited to overcome this limitation. However, two new issues must be dealt with: impedance matching and phase matching. To tackle the former, we developed an original and simple fabrication process in order to obtain a 50ohm matched 2000 squid array. As for the phase, we matched it by periodically modulating the impedance of the squid transmission line in order to open a photonic band gap. Therefore, we locally distort the dispersion relation. This step does not add any complexity to the initial fabrication process. Moreover, we developed a model in good agreement with experimental data while considering the nonlinear behavior of the photonic gap in a Josephson metamaterial. In addition to demonstrating high performance amplifiers poised for numerous quantum technological applications, this thesis opens the door to more fundamental quantum optics experiments taking advantage of these highly nonlinear transmission lines.With the resonant amplifiers, we measured a 1dB compression point around -117dBm and 45MHz bandwidth (at 20 db gain). With the traveling-wave amplifiers, we measured 18dB gain on a 2.25GHz bandwidth, a 1dB compression point reaching -103dBm and near quantum-limited noise performances.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
With a large portfolio of elemental quantum components, superconducting quantum circuits have contributed to dramatic advances in microwave quantum optics. Of these elements, quantum-limited parametric amplifiers have proven to be essential for low noise readout of quantum systems whose energy range is intrinsically low (tens of µeV). They are also used to generate non classical states of light that can be a resource for quantum enhanced detection. Superconducting parametric amplifiers, like quantum bits, typically utilize a Josephson junction as a source of magnetically tunable and dissipation-free nonlinearity. The magnetic control is not an industry standard for devices and starts already to be an issue in large scale circuits. In recent years, efforts have been made to introduce semiconductor weak links as electrically tunable nonlinear elements, with demonstrations of microwave resonators and quantum bits using semiconductor nanowires, a two dimensional electron gas, carbon nanotubes and graphene. However, given the challenge of balancing nonlinearity, dissipation, participation, and energy scale, parametric amplifiers have not yet been implemented with a semiconductor weak link. The work presented in this PhD thesis demonstrates the design, fabrication and performances of a parametric amplifier leveraging a graphene Josephson junction.The graphene is encapsulated in between hBN flakes in order to improve its quality. Using such high quality junctions, we demonstrate amplification with 20 dB gain which is the milestone for overcoming noise of the classical amplifiers in the rest of the amplification chain. The Josephson parametric amplifier being based on a resonant structure (around 6 GHz) suffers from the gain bandwidth product limiting the amplification to a few MegaHertz frequency range. The use of a side gate to electrically tune the graphene gives control of the Josephson junction inductance and thus the resonant frequency of the amplifier. We demonstrate a near 1 GHz tunability of the amplification frequency with the use of a side gate which is as good as the tunability offered by using a magnetic flux on a SQUID for similar amplifier designs. Moreover, graphene has shown to exhibit nonlinear loss under a strong microwave irradiation arising because of dynamics in the Andreev states. Dissipation is known to add intrinsic noise on quantum amplifiers and could be a problem for quantum limited parametric amplification. We demonstrate that despite the presence of nonlinear loss, graphene based Josephson parametric amplifiers can reach near quantum limited amplification. A two photon loss model was used to describe the behaviour of the device but we show that a more complex model is required in order to take into account the nonlinear dissipation and the non-sinusoidal current phase relation. We also studied the dynamic range and showed that the graphene based Josephson parametric amplifier can reach a 1 dB compression point of -123 dBm which is as good as single tunnel junctions based parametric amplifiers. Our results expand the toolset for electrically tunable superconducting quantum circuits and offer new opportunities for the development of quantum technologies such as quantum computing, quantum sensing and fundamental science.
Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
A microwave amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid-state quantum technologies.Here, we introduce a new traveling-wave parametric amplifier based on superconducting quantum interference devices.It displays a 3-GHz bandwidth, a -100-dBm saturation (1-dB compression) point and added noise near the quantum limit.Compared to the previous state of the art, it is an order of magnitude more compact, its characteristic impedance is in situ tunable, and its fabrication process requires only two lithography steps.The key is the engineering of a gap in the dispersion relation of the transmission line.This is obtained using a periodic modulation of the SQUID size, similarly to what is done with photonic crystals.Moreover, we provide a new theoretical treatment to describe the nontrivial interplay between nonlinearity and such periodicity.Our approach provides a path to cointegration with other quantum devices such as qubits given the low footprint and easy fabrication of our amplifier.
The growing interest in quantum technologies, from fundamental physics experiments to quantum computing, demands for extremely performing electronics only adding the minimum amount of noise admitted by quantum mechanics to the input signal (i.e., quantum-limited electronics). Superconducting microwave amplifiers, due to their dissipationless nature, exhibit outstanding performances in terms of noise (quantum limited), and gain. However, bandwidth and saturation power still show space for substantial improvement. Within the DARTWARS11DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS), funded by Italian National Nuclear Institute (INFN), is a quantum technologies project targeted at the development of wideband superconducting amplifiers with noise at the quantum limit and the implementation of a quantum-limited readout in different types of superconducting detectors and qubit.collaboration, we are developing state-of-the-art microwave superconducting amplifiers based on Josephson junction arrays and on distributed kinetic inductance transmission lines. Here we report the realization of a setup for the characterization of the performances of Josephson traveling-wave parametric amplifiers at a temperature of 300 mK. Although in the final experimental setup, these amplifiers will operate at a base temperature of about 20 mK, their characterization at 300 mK allows to evidence the main aspects of their performances, but the ultimate noise level. This represents a quick and relatively inexpensive way to test these superconductive devices that can be of help to improve their design and fabrication.