Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2309.02655

Suppression of quasiparticle poisoning in transmon qubits by gap engineering

Plamen Kamenov, Thomas J. DiNapoli, M. E. Gershenson, Srivatsan Chakram

Published Sep 6, 2023• 3 citations
arXivHTMLPDF

Abstract

The performance of various superconducting devices operating at ultra-low temperatures is impaired by the presence of non-equilibrium quasiparticles. Inelastic quasiparticle (QP) tunneling across Josephson junctions in superconducting qubits results in decoherence and spurious excitations and, notably, can trigger correlated errors that severely impede quantum error correction. In this work, we use "gap engineering" to suppress the tunneling of low-energy quasiparticles in Al-based transmon qubits, a leading building block for superconducting quantum processors. By implementing potential barriers for QP, we strongly suppress QP tunneling across the junction and preserve charge parity for over $10^3$ seconds. The suppression of QP tunneling also results in a reduction in the qubit energy relaxation rates. The demonstrated approach to gap engineering can be easily implemented in all Al-based circuits with Josephson junctions.

DOI
10.48550/arxiv.2309.02655

Related papers

Resisting High-Energy Impact Events through Gap Engineering in Superconducting Qubit Arrays

Matt McEwen, Kevin C. Miao, Juan Atalaya +24 more

Quantum error correction (QEC) provides a practical path to fault-tolerant quantum computing through scaling to large qubit numbers, assuming that physical errors are sufficiently uncorrelated in time and space. In superconducting qubit arrays, high-energy impact events can produce correlated errors, violating this key assumption. Following such an event, phonons with energy above the superconducting gap propagate throughout the device substrate, which in turn generate a temporary surge in quasiparticle (QP) density throughout the array. When these QPs tunnel across the qubits' Josephson junctions, they induce correlated errors. Engineering different superconducting gaps across the qubit's Josephson junctions provides a method to resist this form of QP tunneling. By fabricating all-aluminum transmon qubits with both strong and weak gap engineering on the same substrate, we observe starkly different responses during high-energy impact events. Strongly gap engineered qubits do not show any degradation in T_{1} during impact events, while weakly gap engineered qubits show events of correlated degradation in T_{1}. We also show that strongly gap engineered qubits are robust to QP poisoning from increasing optical illumination intensity, whereas weakly gap engineered qubits display rapid degradation in coherence. Based on these results, gap engineering mitigates the threat of high-energy impacts to QEC in superconducting qubit arrays.

arXiv:2402.15644•Physical Review Letters•Dec 9, 2024•55 citations

A quasiparticle-protected superconducting qubit

Trond Hjerpekjøn Haug, Johan Kolvik, Joey Frey +6 more

Superconducting quantum circuits underpin large-scale quantum processors and are increasingly interfaced with optical systems, yet they are vulnerable to quasiparticle poisoning from high-energy radiation and optical fields. Gap engineering of Josephson junctions suppresses quasiparticle-induced relaxation, but quasiparticles near the junction can still shift the qubit frequency and cause phase errors. Here, we extend gap engineering beyond the junction using a flux-tunable transmon with a gold-on-niobium ground plane and island and strongly gap-engineered aluminum junctions designed to keep quasiparticles away from the junction leads. Compared with an all-aluminum transmon with nominally identical junctions, we demonstrate that the niobium device withstands more than an order of magnitude higher near-infrared optical power before excess relaxation appears. The Nb transmon shows no resolvable quasiparticle-induced frequency shift over the same power range. At the same time, we observe that dephasing and state-preparation-and-measurement infidelity increase with optical power even while relaxation remains protected. These results suggest that engineering the quasiparticle energy landscape beyond the junction can substantially increase qubit resilience, not only to radiation-induced error bursts, but also to nearby optical fields.

quant-pharXiv:2610.12227•Oct 9, 2026•0 citations

Correlated Phase Error Bursts in a Gap-Engineered Superconducting Qubit Array

Vladislav D. Kurilovich, Gabrielle Roberts, Leigh S. Martin +17 more

One of the roadblocks toward the implementation of a fault-tolerant superconducting quantum processor is impacts of ionizing radiation with the qubit substrate. Such impacts temporarily elevate the density of quasiparticles (QPs) across the device, leading to correlated qubit error bursts. The most damaging errors, T 1 errors, stem from QP tunneling across the qubit Josephson junctions (JJs). Recently, we demonstrated [M. McEwen, K. Miao, , ] that this type of error can be strongly suppressed by engineering the profile of superconducting gap at the JJs in a way that prevents QP tunneling. In this work, we identify a new type of impact-induced correlated error that persists in the presence of gap engineering. We observe that impacts shift the frequencies of the affected qubits, and thus lead to correlated phase errors. The frequency shifts are systematically negative, reach values up to 3 MHz, and last for ∼ 1 ms . We provide evidence that the shifts originate from QP-qubit interactions in the JJ region. Further, we demonstrate that the shift-induced phase errors can be detrimental to the performance of quantum error correction protocols.

arXiv:2506.18228•Physical Review X•Mar 3, 2026•4 citations

Quasiparticle tunneling as a probe of Josephson junction barrier and capacitor material in superconducting qubits

Cihan Kurter, Conal E. Murray, R. T. Gordon +15 more

Abstract Non-equilibrium quasiparticles are possible sources for decoherence in superconducting qubits because they can lead to energy decay or dephasing upon tunneling across Josephson junctions (JJs). Here, we investigate the impact of the intrinsic properties of two-dimensional transmon qubits on quasiparticle tunneling (QPT) and discuss how we can use quasiparticle dynamics to gain critical information about the quality of JJ barrier. We find the tunneling rate of the non-equilibrium quasiparticles to be sensitive to the choice of the shunting capacitor material and their geometry in qubits. In some devices, we observe an anomalous temperature dependence of the QPT rate below 100 mK that deviates from a constant background associated with non-equilibrium quasiparticles. We speculate that this behavior is caused by high transmission sites/defects within the oxide barriers of the JJs, leading to spatially localized subgap states. We model this by assuming that such defects generate regions with a smaller effective gap. Our results present a unique in situ characterization tool to assess the uniformity of tunnel barriers in qubit junctions and shed light on how quasiparticles can interact with various elements of the qubit circuit.

arXiv:2106.11488•npj Quantum Information•Mar 21, 2022•32 citations

Nonequilibrium regimes for quasiparticles in superconducting qubits with gap-asymmetric junctions

Giampiero Marchegiani, Gianluigi Catelani

Superconducting qubits hold promise for quantum computing, but their operation is challenged by various sources of noise, including excitations known as quasiparticles. Qubits with gap asymmetry larger than their transition energy are less susceptible to quasiparticle decoherence as the quasiparticles are mostly trapped in the low-gap side of the junction. Because of this trapping, the gap asymmetry can contribute to maintaining the quasiparticles out of equilibrium. Here we address the temperature dependence of the quasiparticle densities in the two sides of the junction. We show that four qualitatively different regimes are possible with increasing temperature: (i) nonequilibrium, (ii) local quasiequilibrium, (iii) global quasiequilibrium, and (iv) full equilibrium. We identify shortcomings in assuming global quasiequilibrium when interpreting experimental data, highlighting how measurements in the presence of magnetic field can aid the accurate determination of the junction parameters, and hence the identification of the nonequilibrium regimes. Quasiparticle poisoning challenges the operation of superconducting qubits, but errors can be suppressed by engineering gap asymmetry between the electrodes of the qubit’s Josephson junction. The authors present a model of the qubit-quasiparticle system valid beyond the low-temperature limit and identify different nonequilibrium regimes, which can affect the interpretation of experimental data.

arXiv:2408.17218•Communications Physics•Mar 27, 2025•4 citations

Numerical Modeling of Quasiparticle-Induced Dissipation in Fluxonium Qubits

Kate Azar, Max Hays, Kyle Serniak

Nonequilibrium quasiparticles (QPs) generated by stray infrared and ionizing radiation can limit the performance of superconducting quantum processors and present challenges for quantum error correction schemes. Models of QP-induced energy relaxation commonly assume that the characteristic energy of the QPs and the qubit transition energy are both small relative to the superconducting gap. Under these assumptions, certain qubits such as the fluxonium would exhibit protection against QP-induced dissipation at specific bias points. Here, we show that this is not necessarily the case, numerically analyzing the predicted rate of QP-induced dissipation in fluxonium qubits for different QP energy distributions and for QPs created via photon-assisted tunneling processes. We find that accounting for small numerical factors, existing theoretical models predict sensitivity to QP-induced errors at bias points previously thought to be protected. We find that inclusion of asymmetry in the superconducting gap energy across the junction can reintroduce suppression of QP-induced relaxation, as expected. Additionally, for QPs created by photon-assisted tunneling, we predict that $T_1$ protection will only occur for a specific energy of pair-breaking radiation. This understanding of fluxonium sensitivity to QP-induced dissipation informs the development of fluxonium-based processors and future QP-mitigation strategies.

quant-pharXiv:2607.24946•Jul 29, 2026•0 citations
The performance of various superconducting devices operating at ultra-low temperatures is impaired by the presence of non-equilibrium quasiparticles. Inelastic quasiparticle (QP) tunneling across Josephson junctions in superconducting qubits results in decoherence and spurious excitations and, notably, can trigger correlated errors that severely impede quantum error correction. In this work, we use "gap engineering" to suppress the tunneling of low-energy quasiparticles in Al-based transmon qubits, a leading building block for superconducting quantum processors. By implementing potential barriers for QP, we strongly suppress QP tunneling across the junction and preserve charge parity for over 10310^3103 seconds. The suppression of QP tunneling also results in a reduction in the qubit energy relaxation rates. The demonstrated approach to gap engineering can be easily implemented in all Al-based circuits with Josephson junctions.
Quantum error correction (QEC) provides a practical path to fault-tolerant quantum computing through scaling to large qubit numbers, assuming that physical errors are sufficiently uncorrelated in time and space. In superconducting qubit arrays, high-energy impact events can produce correlated errors, violating this key assumption. Following such an event, phonons with energy above the superconducting gap propagate throughout the device substrate, which in turn generate a temporary surge in quasiparticle (QP) density throughout the array. When these QPs tunnel across the qubits' Josephson junctions, they induce correlated errors. Engineering different superconducting gaps across the qubit's Josephson junctions provides a method to resist this form of QP tunneling. By fabricating all-aluminum transmon qubits with both strong and weak gap engineering on the same substrate, we observe starkly different responses during high-energy impact events. Strongly gap engineered qubits do not show any degradation in T_{1} during impact events, while weakly gap engineered qubits show events of correlated degradation in T_{1}. We also show that strongly gap engineered qubits are robust to QP poisoning from increasing optical illumination intensity, whereas weakly gap engineered qubits display rapid degradation in coherence. Based on these results, gap engineering mitigates the threat of high-energy impacts to QEC in superconducting qubit arrays.
Superconducting quantum circuits underpin large-scale quantum processors and are increasingly interfaced with optical systems, yet they are vulnerable to quasiparticle poisoning from high-energy radiation and optical fields. Gap engineering of Josephson junctions suppresses quasiparticle-induced relaxation, but quasiparticles near the junction can still shift the qubit frequency and cause phase errors. Here, we extend gap engineering beyond the junction using a flux-tunable transmon with a gold-on-niobium ground plane and island and strongly gap-engineered aluminum junctions designed to keep quasiparticles away from the junction leads. Compared with an all-aluminum transmon with nominally identical junctions, we demonstrate that the niobium device withstands more than an order of magnitude higher near-infrared optical power before excess relaxation appears. The Nb transmon shows no resolvable quasiparticle-induced frequency shift over the same power range. At the same time, we observe that dephasing and state-preparation-and-measurement infidelity increase with optical power even while relaxation remains protected. These results suggest that engineering the quasiparticle energy landscape beyond the junction can substantially increase qubit resilience, not only to radiation-induced error bursts, but also to nearby optical fields.
One of the roadblocks toward the implementation of a fault-tolerant superconducting quantum processor is impacts of ionizing radiation with the qubit substrate. Such impacts temporarily elevate the density of quasiparticles (QPs) across the device, leading to correlated qubit error bursts. The most damaging errors, T 1 errors, stem from QP tunneling across the qubit Josephson junctions (JJs). Recently, we demonstrated [M. McEwen, K. Miao, , ] that this type of error can be strongly suppressed by engineering the profile of superconducting gap at the JJs in a way that prevents QP tunneling. In this work, we identify a new type of impact-induced correlated error that persists in the presence of gap engineering. We observe that impacts shift the frequencies of the affected qubits, and thus lead to correlated phase errors. The frequency shifts are systematically negative, reach values up to 3 MHz, and last for ∼ 1 ms . We provide evidence that the shifts originate from QP-qubit interactions in the JJ region. Further, we demonstrate that the shift-induced phase errors can be detrimental to the performance of quantum error correction protocols.
Abstract Non-equilibrium quasiparticles are possible sources for decoherence in superconducting qubits because they can lead to energy decay or dephasing upon tunneling across Josephson junctions (JJs). Here, we investigate the impact of the intrinsic properties of two-dimensional transmon qubits on quasiparticle tunneling (QPT) and discuss how we can use quasiparticle dynamics to gain critical information about the quality of JJ barrier. We find the tunneling rate of the non-equilibrium quasiparticles to be sensitive to the choice of the shunting capacitor material and their geometry in qubits. In some devices, we observe an anomalous temperature dependence of the QPT rate below 100 mK that deviates from a constant background associated with non-equilibrium quasiparticles. We speculate that this behavior is caused by high transmission sites/defects within the oxide barriers of the JJs, leading to spatially localized subgap states. We model this by assuming that such defects generate regions with a smaller effective gap. Our results present a unique in situ characterization tool to assess the uniformity of tunnel barriers in qubit junctions and shed light on how quasiparticles can interact with various elements of the qubit circuit.
Superconducting qubits hold promise for quantum computing, but their operation is challenged by various sources of noise, including excitations known as quasiparticles. Qubits with gap asymmetry larger than their transition energy are less susceptible to quasiparticle decoherence as the quasiparticles are mostly trapped in the low-gap side of the junction. Because of this trapping, the gap asymmetry can contribute to maintaining the quasiparticles out of equilibrium. Here we address the temperature dependence of the quasiparticle densities in the two sides of the junction. We show that four qualitatively different regimes are possible with increasing temperature: (i) nonequilibrium, (ii) local quasiequilibrium, (iii) global quasiequilibrium, and (iv) full equilibrium. We identify shortcomings in assuming global quasiequilibrium when interpreting experimental data, highlighting how measurements in the presence of magnetic field can aid the accurate determination of the junction parameters, and hence the identification of the nonequilibrium regimes. Quasiparticle poisoning challenges the operation of superconducting qubits, but errors can be suppressed by engineering gap asymmetry between the electrodes of the qubit’s Josephson junction. The authors present a model of the qubit-quasiparticle system valid beyond the low-temperature limit and identify different nonequilibrium regimes, which can affect the interpretation of experimental data.
Nonequilibrium quasiparticles (QPs) generated by stray infrared and ionizing radiation can limit the performance of superconducting quantum processors and present challenges for quantum error correction schemes. Models of QP-induced energy relaxation commonly assume that the characteristic energy of the QPs and the qubit transition energy are both small relative to the superconducting gap. Under these assumptions, certain qubits such as the fluxonium would exhibit protection against QP-induced dissipation at specific bias points. Here, we show that this is not necessarily the case, numerically analyzing the predicted rate of QP-induced dissipation in fluxonium qubits for different QP energy distributions and for QPs created via photon-assisted tunneling processes. We find that accounting for small numerical factors, existing theoretical models predict sensitivity to QP-induced errors at bias points previously thought to be protected. We find that inclusion of asymmetry in the superconducting gap energy across the junction can reintroduce suppression of QP-induced relaxation, as expected. Additionally, for QPs created by photon-assisted tunneling, we predict that T1T_1T1​ protection will only occur for a specific energy of pair-breaking radiation. This understanding of fluxonium sensitivity to QP-induced dissipation informs the development of fluxonium-based processors and future QP-mitigation strategies.