In recent advancements of quantum computing utilizing spin qubits, it has been demonstrated that this platform possesses the potential for implementing two-qubit gates with fidelities exceeding 99.5%. However, as with other qubit platforms, it is not feasible to completely turn qubit couplings off. This study aims to investigate the impact of coherent error matrices in gate set tomography by employing a double quantum dot. We evaluate the infidelity caused by residual exchange between spins and compare various mitigation approaches, including the use of adjusted timing through simple drives, considering different parameter settings in the presence of charge noise. Furthermore, we extend our analysis to larger arrays of exchange-coupled spin qubits to provide an estimation of the expected fidelity. In particular, we demonstrate the influence of residual exchange on a single-qubit Y gate and the native two-qubit SWAP gate in a linear chain. Our findings emphasize the significance of accounting for residual exchange when scaling up spin-qubit devices and highlight the tradeoff between the effects of charge noise and residual exchange in mitigation techniques. Published by the American Physical Society 2024
In recent advancements of quantum computing utilizing spin qubits, it has been demonstrated that this platform possesses the potential for implementing two-qubit gates with fidelities exceeding 99.5%. However, as with other qubit platforms, it is not feasible to completely turn qubit couplings off. This study aims to investigate the impact of coherent error matrices in gate set tomography by employing a double quantum dot. We evaluate the infidelity caused by residual exchange between spins and compare various mitigation approaches, including the use of adjusted timing through simple drives, considering different parameter settings in the presence of charge noise. Furthermore, we extend our analysis to larger arrays of exchange-coupled spin qubits to provide an estimation of the expected fidelity. In particular, we demonstrate the influence of residual exchange on a single-qubit Y gate and the native two-qubit SWAP gate in a linear chain. Our findings emphasize the significance of accounting for residual exchange when scaling up spin-qubit devices and highlight the tradeoff between the effects of charge noise and residual exchange in mitigation techniques. Published by the American Physical Society 2024
We propose methods to mitigate single- and two-qubit control errors due to residual exchange coupling in systems of exchange-coupled resonant singlet-triplet qubits. Commensurate driving, where the pulse length is an integer multiple of the drive period, can mitigate errors from residual intra-qubit exchange, including effects from counter rotating terms and off-axis rotations, as well as leakage errors during two-qubit operations. Residual inter-qubit exchange creates crosstalk errors that reduce single-qubit control fidelities. We show that using a single-spin coupler between two resonant singlet-triplet qubits can reduce this crosstalk error by an order of magnitude. Assuming perfect coupler state preparation and realistic charge and hyperfine noise, we predict that coupler-assisted two-qubit gate errors can be below 3×10−3 for gate times as short as 66ns, even in the presence of residual exchange levels exceeding several hundred kHz. Our results suggest the potential of utilizing coupler-based architectures for large scale fault-tolerant spin qubit processors based on resonant singlet-triplet qubits.
The spin of an electron confined in semiconductor quantum dots is currently a promising candidate for quantum bit (qubit) implementations. Taking advantage of the existing CMOS integration technologies, such devices can offer a platform for large scale quantum computation. However, a quantum mechanical framework bridging a device's physical design and operational parameters to the qubit's energy space is lacking. Furthermore, the spin to charge coupling introduced by intrinsic or induced spin-orbit interaction (SOI) exposes the qubits to charge noise compromising their coherence properties and inducing quantum gate errors. We present here a comodeling framework for double quantum dot (DQD) devices and their charge noise environments. We use a combination of an electrostatic potential solver, full configuration interaction quantum mechanical methods, and two-level-fluctuator models to study the quantum gate performance in realistic device designs and operation conditions. We utilize the developed models together alongside the single electron solutions of the quantum dots to simulate one- and two-qubit gates in the presence of charge noise. We find an inverse correlation between quantum gate errors and quantum dot confinement frequencies. We calculate X-gate fidelities >97 in the simulated Si-MOS devices at a typical TLF density of ${10}^{11}\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}2}$. We also find that exchange driven two-qubit SWAP gates show higher sensitivity to charge noise with fidelities down to 91 in the presence of the same density of TLFs. We further investigate the one- and two-qubit gate fidelities at different TLF densities. We find that given the small size of the quantum dots, sensitivity of a quantum gate to the distance between the noise sources and the quantum dot creates a strong variability in the quantum gate fidelities, which can compromise the device yields in scaled qubit technologies.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Superconducting resonator couplers will likely become an essential component in modular semiconductor quantum dot (QD) spin qubit processors, as they help alleviate crosstalk and wiring issues as the number of qubits increases. Here, we focus on a three-qubit system composed of two modules: a two-electron triple QD resonator coupled to a single-electron double QD. Using a combination of analytical techniques and numerical results, we derive an effective Hamiltonian that describes the three-qubit logical subspace and show that it accurately captures the dynamics of the system. We examine the performance of short-range and long-range entangling gates, revealing the effect of a spectator qubit in reducing the gate fidelities in both cases. We further study the competition between nonadiabatic errors and spectator-associated errors in short-range operations and quantify their relative importance across practical parameter ranges for short and long gate times. We also analyze the impact of charge noise together with residual coupling to the spectator qubit on intermodule entangling gates and find that for current experimental settings, leakage errors are the main source of infidelities in these operations. Our results help pave the way toward identifying optimal modular QD architectures for quantum information processing on semiconductor chips. Published by the American Physical Society 2024
Quantum dot-based quantum computation employs extensively the exchange interaction between nearby electronic spins in order to manipulate and couple different qubits. The exchange interaction, however, couples the qubit states to charge noise, which reduces the fidelity of the quantum gates that employ it. The effect of charge noise can be mitigated by working at noise sweetspots in which the sensitivity to charge variations is reduced. In this work we study the response to charge noise of a double quantum dot based qubit in the presence of ac gates, with arbitrary driving amplitudes, applied either to the dot levels or to the tunneling barrier. Tuning with an ac driving allows to manipulate the sign and strength of the exchange interaction as well as its coupling to environmental electric noise. Moreover, we show the possibility of inducing a second-order sweetspot in the resonant spin-triplet qubit in which the dephasing time is significantly increased.
Charge noise has been one of the main issues in realizing high fidelity two-qubit quantum gates in semiconductor based qubits. Here, we study the influence of quasistatic noise in quantum dot detuning on the controlled phase gate for spin qubits that defined on a double quantum dot. Analytical expressions for the noise averaged Hamiltonian, exchange interaction, as well as the gate fidelity are derived for weak noise covering experimental relevant regime. We also perform interleaved two-qubit randomized benchmarking analysis for the controlled phase gate and show that an exponential decay of the sequential fidelity is still valid for the weak noise.