Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2307.09463

A Cryogenic Memristive Neural Decoder for Fault-tolerant Quantum Error Correction

Victor Yon, Frédéric Marcotte, Pierre-Antoine Mouny, Gebremedhin A. Dagnew, Bohdan Kulchytskyy, Sophie Rochette, Yann Beilliard, Dominique Drouin, Pooya Ronagh

Published Jul 18, 2023• 6 citations
arXivHTMLPDF

Abstract

Neural decoders for quantum error correction (QEC) rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders a promising candidate for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix-vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiOx-based memristive devices' non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder's pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant QEC.

DOI
10.48550/arxiv.2307.09463

Related papers

A memristive neural decoder for cryogenic fault-tolerant quantum error correction

Victor Yon, Frédéric Marcotte, Pierre-Antoine Mouny +6 more

Abstract Neural decoders for quantum error correction rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders promising candidates for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix–vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiO x -based memristive devices’ non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder’s pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant quantum error correction.

Quantum Science and Technology•Mar 21, 2025•2 citations

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Xiaohan Yang, Xuandong Sun, Zhiyi Wu +9 more

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-pharXiv:2605.04892•May 7, 2026•0 citations

Neural Decoders Reduce Logical Error Rates in Surface Code Quantum Systems

Lukas Schneider, Haruki Tanaka

Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.

Frontiers in Applied Physics and Mathematics•Mar 25, 2026•0 citations

A Scalable, Fast and Programmable Neural Decoder for Fault-Tolerant Quantum Computation Using Surface Codes

Zhang, Mengyu, Xiangyu Ren, Guanglei Xi +6 more

Quantum error-correcting codes (QECCs) can eliminate the negative effects of quantum noise, the major obstacle to the execution of quantum algorithms. However, realizing practical quantum error correction (QEC) requires resolving many challenges to implement a high-performance real-time decoding system. Many decoding algorithms have been proposed and optimized in the past few decades, of which neural network (NNs) based solutions have drawn an increasing amount of attention due to their high efficiency. Unfortunately, previous works on neural decoders are still at an early stage and have only relatively simple architectures, which makes them unsuitable for practical QEC. In this work, we propose a scalable, fast, and programmable neural decoding system to meet the requirements of FTQEC for rotated surface codes (RSC). Firstly, we propose a hardware-efficient NN decoding algorithm with relatively low complexity and high accuracy. Secondly, we develop a customized hardware decoder with architectural optimizations to reduce latency. Thirdly, our proposed programmable architecture boosts the scalability and flexibility of the decoder by maximizing parallelism. Fourthly, we build an FPGA-based decoding system with integrated control hardware for evaluation. Our $L=5$ ($L$ is the code distance) decoder achieves an extremely low decoding latency of 197 ns, and the $L=7$ configuration also requires only 1.136 $μ$s, both taking $2L$ rounds of syndrome measurements. The accuracy results of our system are close to minimum weight perfect matching (MWPM). Furthermore, our programmable architecture reduces hardware resource consumption by up to $3.0\times$ with only a small latency loss. We validated our approach in real-world scenarios by conducting a proof-of-concept benchmark with practical noise models, including one derived from experimental data gathered from physical hardware.

arXiv:2305.15767•May 25, 2023•4 citations

Latency-Constrained Hardware-Aware Quantum Error Correction Co-Design with Adaptive Confidence-Gated Neural Decoding for the Rotated Surface Code

Sumit Chongder

Real-time decoding is a major bottleneck in scaling quantum error correction (QEC) from noisy intermediate-scale quantum (NISQ) devices to fault-tolerant quantum computing. We present an adaptive confidence-gated decoding framework for the rotated surface code that treats decoding as a two-stage inference problem. A lightweight feed-forward neural network performs fast-path decoding for the majority of syndrome measurements, while only low-confidence predictions are escalated to a minimum-weight perfect matching (MWPM) refinement stage. We benchmark the framework on rotated surface codes with distances $d \in \{3,5,7,9,11\}$ under circuit-level depolarising noise using the Stim stabiliser simulator. The evaluation characterises logical accuracy, confidence-controlled accuracy-latency trade-offs, decoding throughput, per-shot latency, and decoding-graph resource scaling. Routing only 3.3%-6.2% of syndromes to the refinement stage improves logical accuracy from 99.21% for the neural-only baseline to 99.81% at a confidence threshold of 0.95 while incurring only a bounded increase in average decoding cost. Neural-decoder throughput saturates near $4.6 \times 10^{5}$ samples s$^{-1}$ at batch size 512 on commodity CPU hardware, indicating that the neural fast path is not the dominant throughput bottleneck beyond code distance $d=7$. We release the complete benchmarking pipeline, trained models, raw benchmark data, and source code, and explicitly distinguish the experimentally validated contributions from the broader hardware-aware QEC co-design roadmap, including hardware-constrained code discovery, GPU-accelerated inference, and multi-noise optimisation, which remain directions for future work.

quant-pharXiv:2607.05814•Jul 8, 2026•0 citations

Neural-Network Decoders for Quantum Error Correction Using Surface Codes: A Space Exploration of the Hardware Cost-Performance Tradeoffs

Ramon W. J. Overwater, Masoud Babaie, Fabio Sebastiano

Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.

arXiv:2202.05741•IEEE Transactions on Quantum Engineering•Jan 1, 2022•75 citations
Neural decoders for quantum error correction (QEC) rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders a promising candidate for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix-vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiOx-based memristive devices' non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder's pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant QEC.
Abstract Neural decoders for quantum error correction rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders promising candidates for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix–vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiO x -based memristive devices’ non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder’s pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant quantum error correction.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Quantum error-correcting codes (QECCs) can eliminate the negative effects of quantum noise, the major obstacle to the execution of quantum algorithms. However, realizing practical quantum error correction (QEC) requires resolving many challenges to implement a high-performance real-time decoding system. Many decoding algorithms have been proposed and optimized in the past few decades, of which neural network (NNs) based solutions have drawn an increasing amount of attention due to their high efficiency. Unfortunately, previous works on neural decoders are still at an early stage and have only relatively simple architectures, which makes them unsuitable for practical QEC. In this work, we propose a scalable, fast, and programmable neural decoding system to meet the requirements of FTQEC for rotated surface codes (RSC). Firstly, we propose a hardware-efficient NN decoding algorithm with relatively low complexity and high accuracy. Secondly, we develop a customized hardware decoder with architectural optimizations to reduce latency. Thirdly, our proposed programmable architecture boosts the scalability and flexibility of the decoder by maximizing parallelism. Fourthly, we build an FPGA-based decoding system with integrated control hardware for evaluation. Our L=5L=5L=5 (LLL is the code distance) decoder achieves an extremely low decoding latency of 197 ns, and the L=7L=7L=7 configuration also requires only 1.136 μμμs, both taking 2L2L2L rounds of syndrome measurements. The accuracy results of our system are close to minimum weight perfect matching (MWPM). Furthermore, our programmable architecture reduces hardware resource consumption by up to 3.0×3.0\times3.0× with only a small latency loss. We validated our approach in real-world scenarios by conducting a proof-of-concept benchmark with practical noise models, including one derived from experimental data gathered from physical hardware.
Real-time decoding is a major bottleneck in scaling quantum error correction (QEC) from noisy intermediate-scale quantum (NISQ) devices to fault-tolerant quantum computing. We present an adaptive confidence-gated decoding framework for the rotated surface code that treats decoding as a two-stage inference problem. A lightweight feed-forward neural network performs fast-path decoding for the majority of syndrome measurements, while only low-confidence predictions are escalated to a minimum-weight perfect matching (MWPM) refinement stage. We benchmark the framework on rotated surface codes with distances d∈{3,5,7,9,11}d \in \{3,5,7,9,11\}d∈{3,5,7,9,11} under circuit-level depolarising noise using the Stim stabiliser simulator. The evaluation characterises logical accuracy, confidence-controlled accuracy-latency trade-offs, decoding throughput, per-shot latency, and decoding-graph resource scaling. Routing only 3.3%-6.2% of syndromes to the refinement stage improves logical accuracy from 99.21% for the neural-only baseline to 99.81% at a confidence threshold of 0.95 while incurring only a bounded increase in average decoding cost. Neural-decoder throughput saturates near 4.6×1054.6 \times 10^{5}4.6×105 samples s−1^{-1}−1 at batch size 512 on commodity CPU hardware, indicating that the neural fast path is not the dominant throughput bottleneck beyond code distance d=7d=7d=7. We release the complete benchmarking pipeline, trained models, raw benchmark data, and source code, and explicitly distinguish the experimentally validated contributions from the broader hardware-aware QEC co-design roadmap, including hardware-constrained code discovery, GPU-accelerated inference, and multi-noise optimisation, which remain directions for future work.
Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.