Quantum technologies work by utilizing properties inherent in quantum systems such as quantum coherence and quantum entanglement and are expected to be superior to classical counterparts for solving certain problems in science and engineering. The quantum technologies are, however, fragile against an interaction with an environment (decoherence) and in order to utilize them with high accuracy we need to develop error mitigation techniques which reduce decoherence effects. In this work, we analyze quantum error mitigation (QEM) protocol for quantum metrology in the presence of quantum noise. We demonstrate the effectiveness of our QEM protocol by analyzing three types of quantum Fisher information (QFI), ideal (error-free) QFI, noisy (erroneous) QFI, and quantum-error-mitigated QFI, and show both analytically and numerically that the scaling behaviors of quantum-error-mitigated QFI with respect to the number of probes become restored to the those exhibited in the ideal quantum metrology. Our QEM protocol is constructed by an ensemble of quantum circuits, namely QEM circuit groups, and has advantages such that it can be applied to noisy quantum metrology for any type of initial state as well as any type of the probe-system Hamiltonian, and it can be physically implemented in any type of quantum device. Furthermore, the quantum-error-mitigated QFI become approximately equal to the ideal QFI for almost any values of physical quantities to be sensed. Our protocol enables us to use quantum entanglement as a resource to perform high-sensitive quantum metrology even under the influence of quantum noise.
Quantum technologies work by utilizing properties inherent in quantum systems such as quantum coherence and quantum entanglement and are expected to be superior to classical counterparts for solving certain problems in science and engineering. The quantum technologies are, however, fragile against an interaction with an environment (decoherence) and in order to utilize them with high accuracy we need to develop error mitigation techniques which reduce decoherence effects. In this work, we analyze quantum error mitigation (QEM) protocol for quantum metrology in the presence of quantum noise. We demonstrate the effectiveness of our QEM protocol by analyzing three types of quantum Fisher information (QFI), ideal (error-free) QFI, noisy (erroneous) QFI, and quantum-error-mitigated QFI, and show both analytically and numerically that the scaling behaviors of quantum-error-mitigated QFI with respect to the number of probes become restored to the those exhibited in the ideal quantum metrology. Our QEM protocol is constructed by an ensemble of quantum circuits, namely QEM circuit groups, and has advantages such that it can be applied to noisy quantum metrology for any type of initial state as well as any type of the probe-system Hamiltonian, and it can be physically implemented in any type of quantum device. Furthermore, the quantum-error-mitigated QFI become approximately equal to the ideal QFI for almost any values of physical quantities to be sensed. Our protocol enables us to use quantum entanglement as a resource to perform high-sensitive quantum metrology even under the influence of quantum noise.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.
Quantum computation is expected to have significant practical applications. The main problem in quantum computing is susceptibility to noise. Quantum error correction was developed to allow large-scale applications of quantum computing by achieving fault tolerance. However, as large-scale fault-tolerant quantum computation is not available, the question of applications of near-term hardware remains important. Current noisy intermediate-scale (NISQ) quantum devices can be used for small applications or as testbeds for larger applications; noise suppression techniques are of significant importance to their applicability. This thesis addresses noise suppression via quantum error mitigation (QEM) and quantum error correction (QEC) for near-term applications. The work aims to improve the understanding of noise-suppression techniques and their performance for exploring the physical systems of interest. The results presented in this thesis are divided into QEM and QEC chapters. The majority of the work is focused on QEM. The main interest of this thesis is the application of QEM to Hamiltonian simulations. Two simulation methods: the Trotter method and a quantum signal processing-based method, are explored. Both simulation methods, enhanced by zero-noise extrapolation, are employed to simulate the transverse-field Ising model. The obtained numerical results are promising, as the QEM allows a good recovery of noiseless values in low-noise shallow circuits, even with fixed sampling resources. A further result obtained in the QEM domain is a definition of a mitigation technique based on optimal measurement (in a metrological sense). The presentation includes analytical calculations of implementation costs and error propagation, as well as a numerical application to Hamiltonian simulation, yielding promising results: noise suppression by several orders of magnitude. The QEC part of the thesis explores its application in quantum metrology. The focus is on parameter sensing in many-body Hamiltonians. The results are purely analytical and extend a known lemma to m-local homogeneous Pauli Hamiltonian parameter sensing. This allows discussion of the scaling achieved for sensing the Hamiltonian parameters with respect to the code properties. The results in this thesis establish applications of QEM and QEC in selected near-term applications, quantify their performance, and discuss caveats and potential future applications. This thesis presents a theoretical and numerical study with implications for future experimental implementations. The relative success of the QEM and QEC shown in this thesis relies on tailoring the techniques to a chosen problem, highlighting the importance of technique adaptation in near-term applications.
Random circuit sampling is a leading approach to demonstrating quantum computational advantage, but benchmarking noisy implementations through linear cross-entropy requires costly calculations of ideal output probabilities. We propose a metrological benchmark based on the response to controlled perturbations, characterized by quantum Fisher information (QFI). A relation between QFI and out-of-time-order correlators enables protocols with local or global control. For Haar-random circuits, the average QFI approaches its maximal value in the local protocol and grows linearly with the number of qubits under collective control. In contrast, Clifford circuits yield zero QFI despite extensive operator spreading, showing that the response probes dynamical properties beyond spreading alone. A butterfly protocol further uses system size to enhance sensitivity, yielding a mean inverse sensitivity proportional to the number of qubits with single-qubit readout. Its fluctuations distinguish the Haar and Clifford ensembles despite their identical mean responses. For noisy implementations, we derive an exact relation between the noisy and ideal QFI within a global white-noise model, providing a quantitative reference for the degradation of the benchmark. These protocols enable metrological benchmarking of noisy random quantum circuits without computing ideal output probabilities.
Abstract The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.
Quantum metrology with entangled resources aims to achieve sensitivity beyond the standard quantum limit by harnessing quantum effects even in the presence of environmental noise. So far, sensitivity has been mainly discussed from the viewpoint of reducing statistical errors under the assumption of perfect knowledge of a noise model. However, we cannot always obtain complete information about a noise model due to coherence time fluctuations, which are frequently observed in experiments. Such unknown fluctuating noise leads to systematic errors and nullifies the quantum advantages. Here, we propose an error-mitigated quantum metrology that can filter out unknown fluctuating noise with the aid of purification-based quantum error mitigation. We demonstrate that our protocol mitigates systematic errors and recovers superclassical scaling in a practical situation with time-inhomogeneous bias-inducing noise. Our result is the first demonstration to reveal the usefulness of purification-based error mitigation for unknown fluctuating noise, thus paving the way not only for practical quantum metrology but also for quantum computation affected by such noise.