Quantum computation is expected to have significant practical applications. The main problem in quantum computing is susceptibility to noise. Quantum error correction was developed to allow large-scale applications of quantum computing by achieving fault tolerance. However, as large-scale fault-tolerant quantum computation is not available, the question of applications of near-term hardware remains important. Current noisy intermediate-scale (NISQ) quantum devices can be used for small applications or as testbeds for larger applications; noise suppression techniques are of significant importance to their applicability. This thesis addresses noise suppression via quantum error mitigation (QEM) and quantum error correction (QEC) for near-term applications. The work aims to improve the understanding of noise-suppression techniques and their performance for exploring the physical systems of interest. The results presented in this thesis are divided into QEM and QEC chapters. The majority of the work is focused on QEM. The main interest of this thesis is the application of QEM to Hamiltonian simulations. Two simulation methods: the Trotter method and a quantum signal processing-based method, are explored. Both simulation methods, enhanced by zero-noise extrapolation, are employed to simulate the transverse-field Ising model. The obtained numerical results are promising, as the QEM allows a good recovery of noiseless values in low-noise shallow circuits, even with fixed sampling resources. A further result obtained in the QEM domain is a definition of a mitigation technique based on optimal measurement (in a metrological sense). The presentation includes analytical calculations of implementation costs and error propagation, as well as a numerical application to Hamiltonian simulation, yielding promising results: noise suppression by several orders of magnitude. The QEC part of the thesis explores its application in quantum metrology. The focus is on parameter sensing in many-body Hamiltonians. The results are purely analytical and extend a known lemma to $m$-local homogeneous Pauli Hamiltonian parameter sensing. This allows discussion of the scaling achieved for sensing the Hamiltonian parameters with respect to the code properties. The results in this thesis establish applications of QEM and QEC in selected near-term applications, quantify their performance, and discuss caveats and potential future applications. This thesis presents a theoretical and numerical study with implications for future experimental implementations. The relative success of the QEM and QEC shown in this thesis relies on tailoring the techniques to a chosen problem, highlighting the importance of technique adaptation in near-term applications.
Quantum computation is expected to have significant practical applications. The main problem in quantum computing is susceptibility to noise. Quantum error correction was developed to allow large-scale applications of quantum computing by achieving fault tolerance. However, as large-scale fault-tolerant quantum computation is not available, the question of applications of near-term hardware remains important. Current noisy intermediate-scale (NISQ) quantum devices can be used for small applications or as testbeds for larger applications; noise suppression techniques are of significant importance to their applicability. This thesis addresses noise suppression via quantum error mitigation (QEM) and quantum error correction (QEC) for near-term applications. The work aims to improve the understanding of noise-suppression techniques and their performance for exploring the physical systems of interest. The results presented in this thesis are divided into QEM and QEC chapters. The majority of the work is focused on QEM. The main interest of this thesis is the application of QEM to Hamiltonian simulations. Two simulation methods: the Trotter method and a quantum signal processing-based method, are explored. Both simulation methods, enhanced by zero-noise extrapolation, are employed to simulate the transverse-field Ising model. The obtained numerical results are promising, as the QEM allows a good recovery of noiseless values in low-noise shallow circuits, even with fixed sampling resources. A further result obtained in the QEM domain is a definition of a mitigation technique based on optimal measurement (in a metrological sense). The presentation includes analytical calculations of implementation costs and error propagation, as well as a numerical application to Hamiltonian simulation, yielding promising results: noise suppression by several orders of magnitude. The QEC part of the thesis explores its application in quantum metrology. The focus is on parameter sensing in many-body Hamiltonians. The results are purely analytical and extend a known lemma to m-local homogeneous Pauli Hamiltonian parameter sensing. This allows discussion of the scaling achieved for sensing the Hamiltonian parameters with respect to the code properties. The results in this thesis establish applications of QEM and QEC in selected near-term applications, quantify their performance, and discuss caveats and potential future applications. This thesis presents a theoretical and numerical study with implications for future experimental implementations. The relative success of the QEM and QEC shown in this thesis relies on tailoring the techniques to a chosen problem, highlighting the importance of technique adaptation in near-term applications.
Quantum computing holds the potential to address problems that are currently considered intractable for classical processors by leveraging quantum mechanical effects for simulation, optimization, and chemistry. Despite recent technological progress, quantum hardware remains in the noisy intermediate-scale regime, where coherence limits, gate imperfections, and readout errors restrict circuit depth and algorithmic reliability. Although first demonstrations of small-scale Quantum Error Correction exist, logical processors with low logical error rates are still distant. In the near term, even error-corrected qubits are expected to operate with residual error, which means that improving calibration and mitigating errors at the physical and circuit level will remain essential for obtaining meaningful results. Established calibration routines and mitigation methods such as Zero-Noise-Extrapolation (ZNE) are valuable, but need to be further improved and more rigorously validated with respect to their underlying assumptions, stability and quantitative benefits. This thesis addresses error reduction techniques on transmon qubits through calibration, gate analysis, and circuit-level mitigation. First, a systematic comparison of two single-qubit amplitude calibration techniques is carried out (cross-point and ping-pong calibration), followed by an analysis of two implementations of a two-qubit gate, based on the cross-resonance interaction. The results show that cross-point calibration offers faster convergence, higher precision and a more favorable signal to noise ratio than ping-pong calibration. Hamiltonian tomography confirms the validity of a reduced model for the cross-resonance interaction, and algorithmic tests reveal that direct and echoed CNOT gates offer complementary advantages depending on the application. Second, the thesis develops and evaluates the method of Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE). Its main idea consists of measuring the effective error strength of a circuit through inverted circuits. This quantity is then used for extrapolation towards zero noise rather than relying on simple, approximate noise scaling assumptions as in standard ZNE. This approach constitutes a novel and original method. IC-ZNE consistently produces results closer to ideal reference values than standard ZNE. The method achieves up to 77% error reduction in observable error on the tested circuits compared to standard ZNE and simple post processing filters can yield up to 39% reduction in selected cases compared to standard ZNE. Further refinements introduce noise-adaptive circuit scaling strategies that enhance mitigation outcomes without significant additional cost. The performance of these techniques is examined across several circuits and in the context of variational quantum algorithms. Applications to the Quantum Approximate Optimization Algorithm and the Variational Quantum Eigensolver demonstrate that these techniques extend the useful operating regime of current devices, although their effectiveness decreases for very deep circuits or unfavorable variational ansätze. Taken together, the calibration and mitigation techniques investigated and developed in this thesis demonstrate practical routes toward enhancing the reliability of near-term quantum processors. While they cannot replace full fault-tolerant quantum computation, they offer useful and complementary capabilities that support progress toward scalable quantum technologies.
Quantum error mitigation (QEM) and quantum error correction (QEC) are two research areas that are often considered as distinct entities, and the problem of combining the two approaches in a non-trivial way has only recently started to be explored. In this paper, we explore a paradigm at the intersection of the two, based on the error mitigation technique of Zero-Noise Extrapolation (ZNE), that uses the distance of an error correcting code as a noise parameter. This is distinct from some alternative approaches, as QEC is here used as a subroutine inside the QEM framework, while other proposals use QEM as a subroutine inside QEC experiments. Intuitively, we exploit the fact that a reduction in the physical noise level is analogous to an increase in the code distance, as both of them result in a decrease in the logical error rate. As such, the extrapolation to zero noise in the case of ZNE becomes comparable to the extrapolation to infinite distance in the case of this method. We describe how to calculate expectation values from a fault-tolerant computation, and we gain some analytical intuition for our ansatz choice. We explore the performance of the considered method to reduce the errors in a range of expectation values for a realistic circuit-level noise model and realistic device imperfections on the rotated surface code, and we particularly show that the performance of the method holds even in the case of non-stabiliser input states.
The recent pace of experimental progress in quantum technologies suggests we may soon reach a time when quantum devices can be applied to solve problems of practical interest. Despite this, we are still far from being able to abstract away the effects of noise on quantum computation. The reliable execution of computations on current devices remains a significant challenge. This holds true both for computation with noisy physical qubits and for computation using the limited forms of error correction available on early fault-tolerant quantum devices. In this thesis, I propose methods for improving the reliability of quantum devices, as the field transitions from the regime of noisy intermediate-scale quantum (NISQ) devices to that of early fault-tolerance. These span the topics of quantum error mitigation, quantum error correction and quantum certification. In the first instance, I propose methods for improving the performance of quantum devices affected by limited amounts of noise. Specifically, I present a method for mitigating the effects of time-dependent noise. This adapts a computational certification protocol called accreditation into a method for postselecting on weaker time-dependent noise behaviours. The method is analytically shown to lead to a provable reduction in errors for the case of depolarising noise, and demonstrated in experiments on superconducting hardware. I also present a method for mitigating the effects of photon loss in photonic quantum devices. Through a combination of analytical and numerical analysis, it is shown that there are wide regimes of photon loss for which this method outperforms postselection, the standard method of handling loss in photonic devices. Additionally, evidence is provided that the method enhances the performance of a quantum machine learning model known as a Quantum Circuit Born Machine in the presence of photon loss. Next, I introduce a framework for certifying the correctness of computations run on encoded logical qubits. This is sensitive to considerably more general forms of noise than is usually considered in quantum error correction. It can be applied to efficiently certify the correctness of quantum computations for large system sizes, beyond the capabilities of methods relying on classical simulation. In numerical experiments, the framework was applied to certify the accuracy of instantaneous quantum polynomial (IQP) circuit sampling and Trotterised Hamiltonian simulation. It can be used to efficiently assess whether quantum error mitigation may be usefully applied to a computation, to upper-bound the infidelity of the encoded logical state, and to extend the method of entropy density benchmarking to logical computation. The methods presented in this thesis contribute to the wider effort of building towards reliable quantum computation: both in the sense of reducing the effects of noise on computational output, and in the sense of certifying the correctness of computation beyond the capabilities of classical simulators. Only with reliable quantum computation can the full potential of this technology be realised.
Simulating real-time dynamics under a Hamiltonian is a central goal of quantum information science. While numerous Hamiltonian-simulation quantum algorithms have been proposed, the effects of physical noise have rarely been incorporated into their performance analysis, despite the non-negligible noise levels of quantum devices. We present an end-to-end complexity analysis of noisy Hamiltonian simulation combined with quantum error mitigation (QEM) to answer how many circuit runs are required to reach a given target accuracy. Because the QEM sampling overhead grows exponentially with the circuit depth while the algorithmic error decreases with it, the circuit depth becomes an optimization variable, and we derive an analytic depth-selection rule for two algorithm families. For the order-k Suzuki--Trotter formula, the optimized cost exhibits a critical error εc, below which the required number of circuit runs grows exponentially. QEM improves the noise dependence of εc from sublinear to kth-power scaling, an exponent improvement by a factor of k+1. For randomized-LCU-based simulation, optimizing the repetition number yields a square-root improvement in the simulation-time dependence of the sampling-overhead exponent over the standard parameter choice. We further quantify the noise-characterization cost required for error mitigation via gate set tomography and the recently proposed space-time noise inversion method, showing that the latter can significantly reduce this cost.
Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.
Quantum computing promises to address problems in simulation, optimization, and chemistry, but current hardware operates in the noisy intermediate-scale (NISQ) regime where coherence limits, gate imperfections, and readout errors restrict performance. Improving calibration and mitigating errors therefore remain essential. This thesis analyzes error reduction on superconducting transmon qubits through calibration, gate analysis, and circuit-level mitigation. It compares single-qubit amplitude calibration methods and analyzes two-qubit gates based on the cross-resonance interaction, identifying differences in precision, convergence, and performance. In addition, it develops Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE) which measures effective error strength using inverted circuits. Compared to standard ZNE, IC-ZNE achieves results closer to ideal values and reduces observable errors. Overall, the presented methods improve the reliability of near-term quantum processors.