Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.08563 · Physical Review Applied

Wideband Josephson Parametric Isolator

M.A. Beck, M. Selvanayagam, April Carniol, S. Cairns, C.P. Mancini

Published Sep 22, 2023• 14 citations
arXivHTMLPDF

Abstract

The cryogenic hardware required to build a superconducting-qubit-based quantum computer demands a variety of microwave components. These elements include microwave couplers, filters, amplifiers, and circulators and/or isolators. Traditionally implemented as discrete components, integration of this peripheral hardware, in an effort to reduce overall footprint, thermal load, and added noise, is a key challenge to scaling modern quantum processors with qubit counts climbing over the one hundred plus mark. Ferrite-based microwave isolators, generally employed in the readout chain to decouple qubits and resonators from readout electronics, persist as one of the volumetrically largest devices still utilized as discrete components. Here, we present an alternative two-port isolating integrated circuit derived from the dc superconducting quantum interference device (dc SQUID). Nonreciprocal transmission is achieved using the three-wave microwave-mixing properties of a flux-modulated dc SQUID. We show that when multiple dc SQUIDs are embedded in a multipole admittance-inverting filter structure, the three-wave mixing derived from the flux pumping of the dc SQUIDs can provide directional microwave power flow. For a three-pole filter device, we experimentally demonstrate a directionality greater than 15 dB over a 600-MHz bandwidth.

DOI
10.1103/physrevapplied.20.034054

Related papers

High-Fidelity Qubit Readout Using Interferometric Directional Josephson Devices

Baleegh Abdo, Oblesh Jinka, Nicholas T. Bronn +2 more

Nonreciprocal microwave devices, such as circulators and isolators, are needed in high-fidelity qubit readout schemes to unidirectionally route the readout signals and protect the qubits against noise coming from the output chain.However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magnetic materials.Here we report a fast (750 ns) high-fidelity (95%) quantum nondemolition readout of a coherent superconducting qubit (T 1 = 52 μs, T 2E = 35 μs) without any nonreciprocal magnetic devices.We use in our readout chain a microwave-controlled qubit readout multichip module (QRMCM) that integrates interferometric directional Josephson devices consisting of an isolator and a reconfigurable isolator or amplifier device, and an off-chip low-pass filter.Using the QRMCM, we demonstrate isolation up to 45 dB within 13 MHz, when both directional devices are operated as isolators, and low-noise amplification in excess of 10 dB within a dynamical bandwidth of 10 MHz, when the reconfigurable device is operated as an amplifier.We also investigate the dependence of the qubit coherence times T ϕ and T 2E on the isolation response of the QRMCM, which we control in situ using the microwave drives feeding the isolators.Furthermore, by directly comparing the QRMCM performance with that of a state-of-art configuration (with T 2E ≈ 2T 1 ) that uses a pair of wideband magnetic isolators, we find that the excess pure dephasing measured with the QRMCM (for which T 2E ≈ T 1 ) is likely limited by the residual thermal photon population in the readout resonator.Improved versions of the QRMCM could replace magnetic circulators and isolators in large superconducting quantum processors.

arXiv:2006.01918•PRX Quantum•Dec 28, 2021•20 citations

On-chip single-pump interferometric Josephson isolator for quantum measurements

Baleegh Abdo, Oblesh Jinka, Nicholas T. Bronn +2 more

Nonreciprocal microwave devices, such as circulators and isolators, are critical in high-fidelity qubit readout schemes. They unidirectionally route the readout signals and protect the qubits against noise coming from the output chain. However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magneto-optical effects. Here, we realize an on-chip, single-microwave-pump Josephson ISolator (JIS), formed by coupling two nondegenerate Josephson mixers in an interferometric scheme. We unravel the interplay between the orientation parity of the magnetic fluxes, biasing the mixers, and the JIS directionality. Furthermore, we build a motherboard, which integrates the JIS and other superconducting components, including a Josephson directional amplifier, into a printed circuit and use it to read out a qubit with 92% fidelity, while maintaining 75% of its T2E. Improved versions of this motherboard could replace magnetic circulators and isolators in large superconducting quantum processors.

•Jun 2, 2020•5 citations

Design of on-chip superconducting parametric circulators based on time-modulated coupled-resonator loops

Yang Liangliang, Kaiyong He, Genting Dai +5 more

Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.

Superconductor Science and Technology•Dec 11, 2025•0 citations

A Traveling-Wave Parametric Amplifier and Converter

M. Malnou, Miller, B. T., J. A. Estrada +5 more

High-fidelity qubit measurement is a critical element of all quantum computing architectures. In superconducting systems, qubits are typically measured by probing a readout resonator with a weak microwave tone that must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily because of their low noise performance, approaching the quantum limit. However, they require isolators and circulators to route signals up the measurement chain and to protect qubits from amplified noise. While these commercial components are wideband and simple to use, their intrinsic loss, size, and magnetic shielding requirements impact overall measurement efficiency and scalability. Here we report a parametric amplifier that achieves both broadband forward amplification and backward isolation in a single, compact, non-magnetic circuit that could be integrated on chip with superconducting qubits. The approach relies on a nonlinear transmission line that supports traveling-wave parametric amplification of forward propagating signals, and isolation via frequency conversion of backward propagating signals. This traveling-wave parametric amplifier and converter has the potential to reduce the readout hardware overhead when scaling up the size of superconducting quantum computers.

arXiv:2406.19476•Jun 27, 2024•1 citation

Magnetic-Free Traveling-Wave Nonreciprocal Superconducting Microwave Components

Dengke Zhang, Jaw-Shen Tsai

We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.

arXiv:2106.02928•Physical Review Applied•Jun 4, 2021•10 citations

Parametrically controlled chiral interface for superconducting quantum devices

Xi Cao, Abdullah Irfan, Michael Mollenhauer +2 more

Nonreciprocal microwave routing plays a crucial role in measuring quantum circuits, and allows for realizing cascaded quantum systems for generating and stabilizing entanglement between noninteracting qubits. The most commonly used tools for implementing directionality are ferrite-based circulators. These devices are versatile, but suffer from excess loss, a large footprint, and fixed directionality. For utilizing nonreciprocity in scalable quantum circuits it is desirable to develop efficient integration of low-loss and controllable directional elements. Here, we report the design and experimental realization of a minimal controllable directional interface that can be directly coupled to superconducting qubits. In the device presented, nonreciprocity is realized through a combination of interference and phase-controlled parametric pumping. We have achieved a maximum directionality of around 30 dB, and the performance of the device is predicted quantitatively from independent calibration measurements. Using the excellent agreement of model and experiment, we predict that the circuit will be useable as a chiral qubit interface with inefficiencies at the 1 % level or below. Our work offers a promising route for realizing high-fidelity signal routing and entanglement generation in all-to-all connected microwave quantum networks, and provides a path for isolator-free qubit readout schemes. Published by the American Physical Society 2024

arXiv:2405.15086•Physical Review Applied•Dec 5, 2024•12 citations
The cryogenic hardware required to build a superconducting-qubit-based quantum computer demands a variety of microwave components. These elements include microwave couplers, filters, amplifiers, and circulators and/or isolators. Traditionally implemented as discrete components, integration of this peripheral hardware, in an effort to reduce overall footprint, thermal load, and added noise, is a key challenge to scaling modern quantum processors with qubit counts climbing over the one hundred plus mark. Ferrite-based microwave isolators, generally employed in the readout chain to decouple qubits and resonators from readout electronics, persist as one of the volumetrically largest devices still utilized as discrete components. Here, we present an alternative two-port isolating integrated circuit derived from the dc superconducting quantum interference device (dc SQUID). Nonreciprocal transmission is achieved using the three-wave microwave-mixing properties of a flux-modulated dc SQUID. We show that when multiple dc SQUIDs are embedded in a multipole admittance-inverting filter structure, the three-wave mixing derived from the flux pumping of the dc SQUIDs can provide directional microwave power flow. For a three-pole filter device, we experimentally demonstrate a directionality greater than 15 dB over a 600-MHz bandwidth.
Nonreciprocal microwave devices, such as circulators and isolators, are needed in high-fidelity qubit readout schemes to unidirectionally route the readout signals and protect the qubits against noise coming from the output chain.However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magnetic materials.Here we report a fast (750 ns) high-fidelity (95%) quantum nondemolition readout of a coherent superconducting qubit (T 1 = 52 μs, T 2E = 35 μs) without any nonreciprocal magnetic devices.We use in our readout chain a microwave-controlled qubit readout multichip module (QRMCM) that integrates interferometric directional Josephson devices consisting of an isolator and a reconfigurable isolator or amplifier device, and an off-chip low-pass filter.Using the QRMCM, we demonstrate isolation up to 45 dB within 13 MHz, when both directional devices are operated as isolators, and low-noise amplification in excess of 10 dB within a dynamical bandwidth of 10 MHz, when the reconfigurable device is operated as an amplifier.We also investigate the dependence of the qubit coherence times T ϕ and T 2E on the isolation response of the QRMCM, which we control in situ using the microwave drives feeding the isolators.Furthermore, by directly comparing the QRMCM performance with that of a state-of-art configuration (with T 2E ≈ 2T 1 ) that uses a pair of wideband magnetic isolators, we find that the excess pure dephasing measured with the QRMCM (for which T 2E ≈ T 1 ) is likely limited by the residual thermal photon population in the readout resonator.Improved versions of the QRMCM could replace magnetic circulators and isolators in large superconducting quantum processors.
Nonreciprocal microwave devices, such as circulators and isolators, are critical in high-fidelity qubit readout schemes. They unidirectionally route the readout signals and protect the qubits against noise coming from the output chain. However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magneto-optical effects. Here, we realize an on-chip, single-microwave-pump Josephson ISolator (JIS), formed by coupling two nondegenerate Josephson mixers in an interferometric scheme. We unravel the interplay between the orientation parity of the magnetic fluxes, biasing the mixers, and the JIS directionality. Furthermore, we build a motherboard, which integrates the JIS and other superconducting components, including a Josephson directional amplifier, into a printed circuit and use it to read out a qubit with 92% fidelity, while maintaining 75% of its T2E. Improved versions of this motherboard could replace magnetic circulators and isolators in large superconducting quantum processors.
Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.
High-fidelity qubit measurement is a critical element of all quantum computing architectures. In superconducting systems, qubits are typically measured by probing a readout resonator with a weak microwave tone that must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily because of their low noise performance, approaching the quantum limit. However, they require isolators and circulators to route signals up the measurement chain and to protect qubits from amplified noise. While these commercial components are wideband and simple to use, their intrinsic loss, size, and magnetic shielding requirements impact overall measurement efficiency and scalability. Here we report a parametric amplifier that achieves both broadband forward amplification and backward isolation in a single, compact, non-magnetic circuit that could be integrated on chip with superconducting qubits. The approach relies on a nonlinear transmission line that supports traveling-wave parametric amplification of forward propagating signals, and isolation via frequency conversion of backward propagating signals. This traveling-wave parametric amplifier and converter has the potential to reduce the readout hardware overhead when scaling up the size of superconducting quantum computers.
We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.
Nonreciprocal microwave routing plays a crucial role in measuring quantum circuits, and allows for realizing cascaded quantum systems for generating and stabilizing entanglement between noninteracting qubits. The most commonly used tools for implementing directionality are ferrite-based circulators. These devices are versatile, but suffer from excess loss, a large footprint, and fixed directionality. For utilizing nonreciprocity in scalable quantum circuits it is desirable to develop efficient integration of low-loss and controllable directional elements. Here, we report the design and experimental realization of a minimal controllable directional interface that can be directly coupled to superconducting qubits. In the device presented, nonreciprocity is realized through a combination of interference and phase-controlled parametric pumping. We have achieved a maximum directionality of around 30 dB, and the performance of the device is predicted quantitatively from independent calibration measurements. Using the excellent agreement of model and experiment, we predict that the circuit will be useable as a chiral qubit interface with inefficiencies at the 1 % level or below. Our work offers a promising route for realizing high-fidelity signal routing and entanglement generation in all-to-all connected microwave quantum networks, and provides a path for isolator-free qubit readout schemes. Published by the American Physical Society 2024