Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.
Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.
This thesis develops theory for and experimentally demonstrates a new way to break Lorentz reciprocity—the symmetry, in an electrical network, under exchange of source and detector. The approach is based on the sequential application of frequency conversion and delay; as frequency and time are Fourier duals, these operations do not generally commute. We apply this method in the construction of an on-chip superconducting microwave circulator, a critical component for the unidirectional routing of quantum information in superconducting networks. The device requires neither permanent magnets nor microwave control tones, allowing on-chip integration with other superconducting circuits without expensive control hardware. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to many hundreds of fW (~103 circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its tunability with operation at a selection of frequencies between 4 and 6 GHz. Given the current status of quantum error-correction and architectures for quantum information processing with superconducting circuits, such scalable non-reciprocal devices will almost certainly be necessary for construction of a superconducting quantum computer intended to be more than a proof-of-principle.
We present a unified approach for designing isolators based on temporally modulated coupled resonator networks. Our method leverages standard superconducting quantum interference device--based resonators as building blocks, arranged in series-coupled resonators to realize a wide range of on-chip nonreciprocal devices. The devices operate by translating microwave power into out-of-band intermodulation products in a direction-dependent way. Our theoretical studies demonstrate the effectiveness of the proposed approach, achieving isolators with near-zero insertion losses and isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited an insertion loss of 1.3 dB in the forward direction and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance nonreciprocal devices for superconducting circuits.
Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within 1 % of design values. This tolerance is tighter than standard junction fabrication methods provide, so we propose and demonstrate a design improvement that relaxes the required junction fabrication precision, allowing for higher device performance and fabrication yield. Specifically, we introduce large direct capacitive couplings between the waveguides, which based on the modeling we describe here, requires less stringent junction fabrication tolerance. We implement the design, and measure enhanced “circulation fidelity” above 97 % , with optimized on-resonance insertion loss of 0.2 dB, isolation of 18 dB, and power reflectance of − 15 dB , in good agreement with model calculations.
Building large-scale superconducting quantum circuits will require miniaturisation and integration of supporting devices including microwave circulators, which are currently bulky, stand-alone components. Here we report the realisation of a passive on-chip circulator which is made from a loop consisting of three tunnel-coupled superconducting islands, with DC-only control fields. We observe the effect of quasiparticle tunnelling, and we dynamically classify the system into different quasiparticle sectors. When tuned for circulation, the device exhibits strongly non-reciprocal 3-port scattering, with average on-resonance insertion loss of 2 dB, isolation of 14 dB, power reflectance of -11 dB, and a bandwidth of 200 MHz.
We present a unified approach for designing a diverse range of superconducting non-reciprocal components, including circulators, isolators, and uni-directional amplifiers, based on temporally-modulated coupled resonator networks. Our method leverages standard SQUID-based resonators as building blocks, arranged in various configurations such as series-coupled, wye-connected, and lattice-coupled resonators, to realize a wide range of on-chip non-reciprocal devices. Our theoretical studies demonstrated the effectiveness of the proposed approach, achieving circulators and isolators with near-zero insertion losses and isolation greater than 20 dB, and directional amplifiers with forward gain exceeding 10 dB and reverse isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited insertion loss of 1.3 dB in the forward direction, and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance non-reciprocal devices for superconducting circuits.