Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2211.06382

Hardware optimized parity check gates for superconducting surface codes

Matthew J. Reagor, Thomas C. Bohdanowicz, David Rodríguez Pérez, Eyob Alebachew Sete, William J. Zeng

Published Nov 11, 2022• 4 citations
arXivHTMLPDF

Abstract

Error correcting codes use multi-qubit measurements to realize fault-tolerant quantum logic steps. In fact, the resources needed to scale-up fault-tolerant quantum computing hardware are largely set by this task. Tailoring next-generation processors for joint measurements, therefore, could result in improvements to speed, accuracy, or cost -- accelerating the development large-scale quantum computers. Here, we motivate such explorations by analyzing an unconventional surface code based on multi-body interactions between superconducting transmon qubits. Our central consideration, Hardware Optimized Parity (HOP) gates, achieves stabilizer-type measurements through simultaneous multi-qubit conditional phase accumulation. Despite the multi-body effects that underpin this approach, our estimates of logical faults suggest that this design can be at least as robust to realistic noise as conventional designs. We show a higher threshold of $1.25 \times 10^{-3}$ compared to the standard code's $0.79 \times 10^{-3}$. However, in the HOP code the logical error rate decreases more slowly with decreasing physical error rate. Our results point to a fruitful path forward towards extending gate-model platforms for error correction at the dawn of its empirical development.

DOI
10.48550/arxiv.2211.06382

Related papers

Optimizing Superconducting Three-Qubit Gates for Surface-Code Error Correction

Stephan Tasler, Josias Old, Lukas Heunisch +4 more

Quantum error correction (QEC) is one of the crucial building blocks for developing quantum computers that have significant potential for reaching a quantum advantage in applications. Prominent candidates for QEC are stabilizer codes for which periodic readout of stabilizer operators is typically implemented via successive two-qubit entangling gates, and is repeated many times during a computation. To improve QEC performance, it is thus beneficial to make the stabilizer readout faster and less prone to fault-tolerance-breaking errors. Here we design a 3-qubit CZZ gate for superconducting transmon qubits that maps the parity of two data qubits onto one measurement qubit in a single step. We find that the gate can be executed in a duration of $35\,$ns with a fidelity of F$=99.96 \, \%$. To optimize the gate, we use an error model obtained from the microscopic gate simulation to systematically suppress Pauli errors that are particularly harmful to the QEC protocol. Using this error model, we investigate the implementation of this 3-qubit gate in a surface code syndrome readout schedule. We find that for the rotated surface code, the implementation of CZZ gates increases the error threshold by nearly 50\% to $\approx 1.2\,\%$ and decreases the logical error rate, in the experimental relevant regime, by up to one order of magnitude, compared to the standard CZ readout protocol. We also show that for the unrotated surface code, strictly fault-tolerant readout schedules can be found. This opens a new perspective for below-threshold surface-code error correction, where it can be advantageous to use multi-qubit gates instead of two-qubit gates to obtain a better QEC performance.

arXiv:2506.09028•Jan 1, 2025•0 citations

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Fault-Tolerant Stabilizer Measurements in Surface Codes with Three-Qubit Gates

Josias Old, Stephan Tasler, Michael J. Hartmann +1 more

Stabilizer quantum error correction (QEC) codes, in particular topological surface codes, are prime candidates to enable practical quantum computing. While it is widely believed that strictly fault-tolerant protocols can only be implemented using single- and two-qubit gates, several quantum computing platforms, including trapped ions, neutral atoms, and superconducting qubits, support native multi-qubit operations. In this Letter, we show that stabilizer measurement circuits for unrotated surface codes can be fault tolerant using single auxiliary qubits and three-qubit gates. These gates enable lower-depth circuits with fewer fault locations and potentially shorter QEC cycle times. We find that in an optimistic parameter regime where fidelities of three-qubit gates are the same as those of two-qubit gates, the logical error rate can be up to one order of magnitude lower and the threshold significantly higher, increasing from ≈0.63% to ≈0.83%. Our results, applicable to a wide range of platforms, motivate further investigation into multi-qubit gates for fault-tolerant QEC as they can offer substantial time and physical qubit resource advantages to reach a given target logical error rate.

arXiv:2506.09029•Physical Review Letters•Nov 13, 2025•7 citations

Fault-tolerant quantum computing with three-dimensional surface codes

Michael Vasmer

Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.

•Dec 28, 2019•2 citations

Surface-code Superconducting Quantum Processors: From Calibration To Logical Performance

Hany A. Ali

Current quantum processors are fragile, noisy and fairly limited in both quantity and quality with tens of qubits and physical error rates of around 10^-3. To realize practical quantum applications, however, error rates need to be below 10^-15 across millions of qubits. To bridge this gap and fully harness the potential of quantum computers, quantum error correction (QEC) is essential. QEC codes are designed to protect quantum information by redundantly encoding it onto multiple physical qubits. This encoding allows for the detection and correction of local errors affecting individual qubits, e.g., through stabilizer measurements. Importantly, if the physical error rates are below a specific threshold, QEC codes can exponentially suppress logical error rates by increasing the number of physical qubits involved. This is essential for achieving fault-tolerant computations, which are key to unlocking the full potential of quantum computers. The work presented in this thesis focuses on the implementation and optimization of small-scale QEC experiments using the surface code and flux-tunable superconducting qubits (Transmons). It addresses several key challenges: enhancing two-qubit gate fidelity in Surface-4 (Chapter 2), implementing an error-detection code with Surface-7 (Chapter 3), automating the calibration and benchmarking of the building blocks in Surface-17 (Chapter 4), reducing leakage into higher excited states with leakage reduction units (Chapter 5), assessing and enhancing the performance of logical qubits (Chapters 7 and 8).

arXiv:2504.17082•Apr 23, 2025•0 citations

3D Stacked Surface-Code Architecture for Measurement-Free Fault-Tolerant Quantum Error Correction

GunSik Min, IlKwon Sohn, Jun Heo

Mid-circuit measurements are a major bottleneck for superconducting quantum processors because they are slower and noisier than gates. Measurement-free quantum error correction (mfec) replaces repeated measurements and classical feed-forward by coherent quantum feedback, but existing mfec protocols suffer from severe connectivity overhead when mapped to planar surface-code architectures: transversal interactions between logical patches require SWAP chains of length $O(d)$ in the code distance, which increase depth and generate hook errors. This work introduces a 3D stacked surface-code architecture for measurement-free fault-tolerant quantum error correction that removes this connectivity bottleneck. Vertical transversal couplers between aligned surface-code patches enable coherent parity mapping and feedback with zero SWAP overhead, realizing constant-depth $O(1)$ inter-layer operations in d while preserving local 2D stabilizer checks. A fault-tolerant mfec protocol for the surface code is constructed that suppresses hook errors under realistic noise. An analytical performance model shows that the 3D architecture overcomes the readout error floor and achieves logical error rates orders of magnitude below both standard measurement-based surface codes and 2D mfec variants in regimes with slow, noisy measurements, identifying 3D integration as a key enabler for scalable measurement-free fault tolerance.

quant-pharXiv:2601.13648•Jan 21, 2026•0 citations
Error correcting codes use multi-qubit measurements to realize fault-tolerant quantum logic steps. In fact, the resources needed to scale-up fault-tolerant quantum computing hardware are largely set by this task. Tailoring next-generation processors for joint measurements, therefore, could result in improvements to speed, accuracy, or cost -- accelerating the development large-scale quantum computers. Here, we motivate such explorations by analyzing an unconventional surface code based on multi-body interactions between superconducting transmon qubits. Our central consideration, Hardware Optimized Parity (HOP) gates, achieves stabilizer-type measurements through simultaneous multi-qubit conditional phase accumulation. Despite the multi-body effects that underpin this approach, our estimates of logical faults suggest that this design can be at least as robust to realistic noise as conventional designs. We show a higher threshold of 1.25×10−31.25 \times 10^{-3}1.25×10−3 compared to the standard code's 0.79×10−30.79 \times 10^{-3}0.79×10−3. However, in the HOP code the logical error rate decreases more slowly with decreasing physical error rate. Our results point to a fruitful path forward towards extending gate-model platforms for error correction at the dawn of its empirical development.
Quantum error correction (QEC) is one of the crucial building blocks for developing quantum computers that have significant potential for reaching a quantum advantage in applications. Prominent candidates for QEC are stabilizer codes for which periodic readout of stabilizer operators is typically implemented via successive two-qubit entangling gates, and is repeated many times during a computation. To improve QEC performance, it is thus beneficial to make the stabilizer readout faster and less prone to fault-tolerance-breaking errors. Here we design a 3-qubit CZZ gate for superconducting transmon qubits that maps the parity of two data qubits onto one measurement qubit in a single step. We find that the gate can be executed in a duration of 35 35\,35ns with a fidelity of F=99.96 %=99.96 \, \%=99.96%. To optimize the gate, we use an error model obtained from the microscopic gate simulation to systematically suppress Pauli errors that are particularly harmful to the QEC protocol. Using this error model, we investigate the implementation of this 3-qubit gate in a surface code syndrome readout schedule. We find that for the rotated surface code, the implementation of CZZ gates increases the error threshold by nearly 50\% to ≈1.2 %\approx 1.2\,\%≈1.2% and decreases the logical error rate, in the experimental relevant regime, by up to one order of magnitude, compared to the standard CZ readout protocol. We also show that for the unrotated surface code, strictly fault-tolerant readout schedules can be found. This opens a new perspective for below-threshold surface-code error correction, where it can be advantageous to use multi-qubit gates instead of two-qubit gates to obtain a better QEC performance.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Stabilizer quantum error correction (QEC) codes, in particular topological surface codes, are prime candidates to enable practical quantum computing. While it is widely believed that strictly fault-tolerant protocols can only be implemented using single- and two-qubit gates, several quantum computing platforms, including trapped ions, neutral atoms, and superconducting qubits, support native multi-qubit operations. In this Letter, we show that stabilizer measurement circuits for unrotated surface codes can be fault tolerant using single auxiliary qubits and three-qubit gates. These gates enable lower-depth circuits with fewer fault locations and potentially shorter QEC cycle times. We find that in an optimistic parameter regime where fidelities of three-qubit gates are the same as those of two-qubit gates, the logical error rate can be up to one order of magnitude lower and the threshold significantly higher, increasing from ≈0.63% to ≈0.83%. Our results, applicable to a wide range of platforms, motivate further investigation into multi-qubit gates for fault-tolerant QEC as they can offer substantial time and physical qubit resource advantages to reach a given target logical error rate.
Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.
Current quantum processors are fragile, noisy and fairly limited in both quantity and quality with tens of qubits and physical error rates of around 10^-3. To realize practical quantum applications, however, error rates need to be below 10^-15 across millions of qubits. To bridge this gap and fully harness the potential of quantum computers, quantum error correction (QEC) is essential. QEC codes are designed to protect quantum information by redundantly encoding it onto multiple physical qubits. This encoding allows for the detection and correction of local errors affecting individual qubits, e.g., through stabilizer measurements. Importantly, if the physical error rates are below a specific threshold, QEC codes can exponentially suppress logical error rates by increasing the number of physical qubits involved. This is essential for achieving fault-tolerant computations, which are key to unlocking the full potential of quantum computers. The work presented in this thesis focuses on the implementation and optimization of small-scale QEC experiments using the surface code and flux-tunable superconducting qubits (Transmons). It addresses several key challenges: enhancing two-qubit gate fidelity in Surface-4 (Chapter 2), implementing an error-detection code with Surface-7 (Chapter 3), automating the calibration and benchmarking of the building blocks in Surface-17 (Chapter 4), reducing leakage into higher excited states with leakage reduction units (Chapter 5), assessing and enhancing the performance of logical qubits (Chapters 7 and 8).
Mid-circuit measurements are a major bottleneck for superconducting quantum processors because they are slower and noisier than gates. Measurement-free quantum error correction (mfec) replaces repeated measurements and classical feed-forward by coherent quantum feedback, but existing mfec protocols suffer from severe connectivity overhead when mapped to planar surface-code architectures: transversal interactions between logical patches require SWAP chains of length O(d)O(d)O(d) in the code distance, which increase depth and generate hook errors. This work introduces a 3D stacked surface-code architecture for measurement-free fault-tolerant quantum error correction that removes this connectivity bottleneck. Vertical transversal couplers between aligned surface-code patches enable coherent parity mapping and feedback with zero SWAP overhead, realizing constant-depth O(1)O(1)O(1) inter-layer operations in d while preserving local 2D stabilizer checks. A fault-tolerant mfec protocol for the surface code is constructed that suppresses hook errors under realistic noise. An analytical performance model shows that the 3D architecture overcomes the readout error floor and achieves logical error rates orders of magnitude below both standard measurement-based surface codes and 2D mfec variants in regimes with slow, noisy measurements, identifying 3D integration as a key enabler for scalable measurement-free fault tolerance.