Abstract Single photon detectors play a key role across several basic science and technology applications. While progress has been made in improving performance, single photon detectors that can maintain high performance while also resolving the photon frequency are still lacking. By means of quantum simulations, we show that nanoscale elements cooperatively interacting with the photon field in a photodetector architecture allow to simultaneously achieve high efficiency, low jitter, and high frequency resolution. We discuss how such cooperative interactions are essential to reach this performance regime, analyzing the factors that impact performance and trade-offs between metrics. We illustrate the potential performance for frequency resolution over a 1 eV bandwidth in the visible range, indicating near perfect detection efficiency, jitter of a few hundred femtoseconds, and frequency resolution of tens of meV. Finally, a potential physical realization of such an architecture is presented based on carbon nanotubes functionalized with quantum dots.
Abstract Single photon detectors play a key role across several basic science and technology applications. While progress has been made in improving performance, single photon detectors that can maintain high performance while also resolving the photon frequency are still lacking. By means of quantum simulations, we show that nanoscale elements cooperatively interacting with the photon field in a photodetector architecture allow to simultaneously achieve high efficiency, low jitter, and high frequency resolution. We discuss how such cooperative interactions are essential to reach this performance regime, analyzing the factors that impact performance and trade-offs between metrics. We illustrate the potential performance for frequency resolution over a 1 eV bandwidth in the visible range, indicating near perfect detection efficiency, jitter of a few hundred femtoseconds, and frequency resolution of tens of meV. Finally, a potential physical realization of such an architecture is presented based on carbon nanotubes functionalized with quantum dots.
A number of applications in basic science and technology would benefit from high-fidelity photon-number-resolving photodetectors. While some recent experimental progress has been made in this direction, the requirements for true photon number resolution are stringent, and no design currently exists that achieves this goal. Here we employ techniques from fundamental quantum optics to demonstrate that detectors composed of subwavelength elements interacting collectively with the photon field can achieve high-performance photon number resolution. We propose a new design that simultaneously achieves photon number resolution, high efficiency, low jitter, low dark counts, and high count rate. We discuss specific systems that satisfy the design requirements, pointing to the important role of nanoscale device elements.
Abstract While single photon detectors provide superior intensity sensitivity, spectral resolution is usually lost after the detection event. Yet for applications in low signal infrared spectroscopy recovering information about the photon’s frequency contributions is essential. Here we use highly efficient waveguide integrated superconducting single-photon detectors for on-chip coherent detection. In a single nanophotonic device, we demonstrate both single-photon counting with up to 86% on-chip detection efficiency, as well as heterodyne coherent detection with spectral resolution f/∆f exceeding 1011. By mixing a local oscillator with the single photon signal field, we observe frequency modulation at the intermediate frequency with ultra-low local oscillator power in the femto-Watt range. By optimizing the nanowire geometry and the working parameters of the detection scheme, we reach quantum-limited sensitivity. Our approach enables to realize matrix integrated heterodyne nanophotonic devices in the C-band wavelength range, for classical and quantum optics applications where single-photon counting as well as high spectral resolution are required simultaneously.
Since their inception, superconducting nanowire single-photon detectors have been enabling quantum optical applications and the rise of the photonic quantum industry. The evolution in the detector design and read-out strategies has led to the introduction of devices with a plurality of independent pixels, which have been able to operate with high system detection efficiency at high speed while also supporting photon number resolution capabilities. However, this comes at the cost of a complex readout that requires one coaxial cable for each pixel of the array. Here, we report a 28-pixel SNSPD with a dedicated parallel architecture that, while maintaining a simple readout with a single coaxial line, enables the detector to operate at high speed with low-performance degradation. The device shows a maximum single-photon efficiency of 88% and is able to maintain its efficiency above 50%, coupled with a timing jitter lower than 80 ps, up to a detection rate of 200 million counts per second. The detector also provides state-of-the-art photon-number-resolving performances with a 2-photon efficiency of 75% and a 3-photon efficiency of 62%.
Since their first demonstration in 2001 [Gol’tsman et al., Appl. Phys. Lett. 79, 705–707 (2001)], superconducting-nanowire single-photon detectors (SNSPDs) have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon-starved fields of optics. Until now, however, in nearly all experiments, SNSPDs were used as “binary” detectors, meaning that they could only distinguish between 0 and >=1 photons, and photon number information was lost. Recent research has demonstrated proof-of-principle photon-number resolution (PNR) SNSPDs counting 2–5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including Hong–Ou–Mandel interference, photonic quantum computing, quantum communication, and non-Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850–950 nm are of great interest due to the availability of high-quality semiconductor quantum dots (QDs) [Heindel et al., Adv. Opt. Photonics 15, 613–738 (2023)] and high-performance cesium-based quantum memories [Ma et al., J. Opt. 19, 043001 (2017)]. In this paper, we demonstrate NbTiN-based SNSPDs with >94% system detection efficiency, sub-11 ps timing jitter for one photon, and sub-7 ps for 2 photons. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the PNR performance of demonstrated detectors can be further improved by enhancing the signal-to-noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.
Single-photon detection with high efficiency, high time resolution, low dark counts and high photon detection-rates is required for a wide range of optical measurements. Although efficient detectors have been reported, combining all performances in a single device remains a challenge. Here, we show a broadband NbTiN superconducting nanowire detector with an efficiency over 92%, over 150MHz photon detection-rate and dark counts below 130Hz operated in a conventional Gifford-McMahon cryostat. Furthermore, with an optimized detector and readout electronics, we reach a record low jitter of 14.80ps while maintaining high efficiency.
Abstract A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8–11 nm) and improving the pattern fidelity of the nanostructure of the superconducting nanowire single-photon detectors (SNSPD), we fabricated devices demonstrating superior performance over all previously reported detectors in the combination of efficiency and time resolution. Our findings prove that small variations in the nanowire width, in the order of a few nanometers, can lead to a significant penalty on their temporal response. Addressing these issues, we consistently achieved high time resolution (best device 7.7 ps, other devices ∼10–16 ps) simultaneously with high system detection efficiencies (80–90%) in the wavelength range of 780–1000 nm, as well as in the telecom bands (1310–1550 nm). The use of thicker films allowed us to fabricate large-area multipixel devices with homogeneous pixel performance. We first fabricated and characterized a 100 × 100 μm2 16-pixel detector and showed there was little variation among individual pixels. Additionally, to showcase the power of our platform, we fabricated and characterized 4-pixel multimode fiber-coupled detectors and carried out photon-correlation experiments on a nanowire quantum dot resulting in g2(0) values lower than 0.04. The multipixel detectors alleviate the need for beamsplitters and can be used for higher order correlations with promising prospects not only in the field of quantum optics, but also in bioimaging applications, such as fluorescence microscopy and positron emission tomography.