Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

APL Photonics

High-performance photon number resolving detectors for 850–950 nm wavelength range

Johannes W. N. Los, Mariia Sidorova, Bruno Lopez-Rodriguez, Patrick Qualm, Jin Chang, Stephan Steinhauer, Val Zwiller, Iman Esmaeil Zadeh

Published Jun 1, 2024• 26 citations
Publisher

Abstract

Since their first demonstration in 2001 [Gol’tsman et al., Appl. Phys. Lett. 79, 705–707 (2001)], superconducting-nanowire single-photon detectors (SNSPDs) have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon-starved fields of optics. Until now, however, in nearly all experiments, SNSPDs were used as “binary” detectors, meaning that they could only distinguish between 0 and >=1 photons, and photon number information was lost. Recent research has demonstrated proof-of-principle photon-number resolution (PNR) SNSPDs counting 2–5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including Hong–Ou–Mandel interference, photonic quantum computing, quantum communication, and non-Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850–950 nm are of great interest due to the availability of high-quality semiconductor quantum dots (QDs) [Heindel et al., Adv. Opt. Photonics 15, 613–738 (2023)] and high-performance cesium-based quantum memories [Ma et al., J. Opt. 19, 043001 (2017)]. In this paper, we demonstrate NbTiN-based SNSPDs with >94% system detection efficiency, sub-11 ps timing jitter for one photon, and sub-7 ps for 2 photons. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the PNR performance of demonstrated detectors can be further improved by enhancing the signal-to-noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.

DOI
10.1063/5.0204340

Related papers

High-Performance Photon Number Resolving Detectors for 850-950 nm wavelengths

Johannes W. N. Los, Mariia Sidorova, Bruno Lopez-Rodriguez +5 more

Since their first demonstration in 2001, superconducting-nanowire single-photon detectors have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon starved fields of optics. Until now, however, in nearly all experiments SNSPDs were used as binary detectors, meaning they can only distinguish between 0 and more than 1 photons and photon number information is lost. Recent research works have demonstrated proof of principle photon number resolving (PNR) SNSPDs counting 2 to 5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including HOM interference, photonic quantum computing, quantum communication, and non Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850 to 950 nm are of great interest due to the availability of high quality semiconductor quantum dots and high-performance Cesium-based quantum memories. In this paper, we demonstrate NbTiN based SNSPDs with over 94 percent system detection efficiency, sub 11 ps timing jitter for one photon, and sub 7 ps for two photon. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the current PNR performance of our detectors can still be further improved by improving the signal to noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.

arXiv:2401.07265•Jan 14, 2024•2 citations

Photon-number resolving SNSPD for quantum photonic integrated circuits on GaAs at 4.2K

Ekkehart Schmidt, Eric Reutter, Mario Schwartz +5 more

Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire single-photon detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration. A high statistical accuracy for the photon number is achieved for a Poissonian light source at photon flux below \num{5} photons/pulse with a detection efficiency of 22.7$\pm$3.0 % at 900 nm and pulse rate frequency of 76 MHz. We demonstrate the ability of such a detector to discriminate a sub-Poissonian from a Poissonian light source. This demonstration shows the practical benefit of using a PNR detector in a quantum photonic circuit.

•Oct 26, 2018•1 citation

Experimental Demonstration of Superconducting Series Nanowire Photon-Number-Resolving Detector at 660 nm Wavelength

Ruiying Xu, Tao Xu, Qi Chen +11 more

Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.

IEEE photonics journal•Jan 24, 2019•1 citation

Characterization of a Photon-Number Resolving SNSPD Using Poissonian and Sub-Poissonian Light

Ekkehart Schmidt, Eric Reutter, Mario Schwartz +5 more

Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon-based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire singlephoton detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration operating at a temperature of 4 K. A high statistical accuracy for the photon number is achieved for a Poissonian light source at a photon flux below 5 photons/pulse with a detection efficiency of 22.7 ± 3 % at 900 nm and a pulse rate frequency of 76 MHz. We demonstrate the ability of such a detector to discriminate a sub-Poissonian from a Poissonian light source.

arXiv:1810.11256•IEEE Transactions on Applied Superconductivity•Mar 21, 2019•17 citations

Photon-Number-Resolving Single-Photon Detector with a System Detection Efficiency of 98% and Photon-Number Resolution of 32

Chaomeng Ding, Xing-Yu Zhang, Jia-Min Xiong +8 more

High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.

arXiv:2504.02202•ACS Photonics•Jul 4, 2025•18 citations

Design for superconducting nanowire single-photon detectors for photon number resolution and spatial resolution

Ying Yang, Junquan Guo, Yongliang Xu +3 more

Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications•Feb 17, 2025•0 citations
Since their first demonstration in 2001 [Gol’tsman et al., Appl. Phys. Lett. 79, 705–707 (2001)], superconducting-nanowire single-photon detectors (SNSPDs) have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon-starved fields of optics. Until now, however, in nearly all experiments, SNSPDs were used as “binary” detectors, meaning that they could only distinguish between 0 and >=1 photons, and photon number information was lost. Recent research has demonstrated proof-of-principle photon-number resolution (PNR) SNSPDs counting 2–5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including Hong–Ou–Mandel interference, photonic quantum computing, quantum communication, and non-Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850–950 nm are of great interest due to the availability of high-quality semiconductor quantum dots (QDs) [Heindel et al., Adv. Opt. Photonics 15, 613–738 (2023)] and high-performance cesium-based quantum memories [Ma et al., J. Opt. 19, 043001 (2017)]. In this paper, we demonstrate NbTiN-based SNSPDs with >94% system detection efficiency, sub-11 ps timing jitter for one photon, and sub-7 ps for 2 photons. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the PNR performance of demonstrated detectors can be further improved by enhancing the signal-to-noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.
Since their first demonstration in 2001, superconducting-nanowire single-photon detectors have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon starved fields of optics. Until now, however, in nearly all experiments SNSPDs were used as binary detectors, meaning they can only distinguish between 0 and more than 1 photons and photon number information is lost. Recent research works have demonstrated proof of principle photon number resolving (PNR) SNSPDs counting 2 to 5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including HOM interference, photonic quantum computing, quantum communication, and non Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850 to 950 nm are of great interest due to the availability of high quality semiconductor quantum dots and high-performance Cesium-based quantum memories. In this paper, we demonstrate NbTiN based SNSPDs with over 94 percent system detection efficiency, sub 11 ps timing jitter for one photon, and sub 7 ps for two photon. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the current PNR performance of our detectors can still be further improved by improving the signal to noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.
Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire single-photon detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration. A high statistical accuracy for the photon number is achieved for a Poissonian light source at photon flux below \num{5} photons/pulse with a detection efficiency of 22.7$\pm$3.0 % at 900 nm and pulse rate frequency of 76 MHz. We demonstrate the ability of such a detector to discriminate a sub-Poissonian from a Poissonian light source. This demonstration shows the practical benefit of using a PNR detector in a quantum photonic circuit.
Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.
Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon-based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire singlephoton detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration operating at a temperature of 4 K. A high statistical accuracy for the photon number is achieved for a Poissonian light source at a photon flux below 5 photons/pulse with a detection efficiency of 22.7 ± 3 % at 900 nm and a pulse rate frequency of 76 MHz. We demonstrate the ability of such a detector to discriminate a sub-Poissonian from a Poissonian light source.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.