Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.13917

A superconducting qubit with noise-insensitive plasmon levels and decay-protected fluxon states

Farid Hassani, Matilda Peruzzo, Lucky N. Kapoor, Andrea Trioni, Martin Žemlička, J. M. Fink

Published Feb 28, 2022• 3 citations
arXivHTMLPDF

Abstract

The inductively shunted transmon (IST) is a superconducting qubit with exponentially suppressed fluxon transitions and a plasmon spectrum approximating that of the transmon. It shares many characteristics with the transmon but offers charge offset insensitivity for all levels and precise flux tunability with quadratic flux noise suppression. In this work we propose and realize IST qubits deep in the transmon limit where the large geometric inductance acts as a mere perturbation. With a flux dispersion of only 5.1 MHz we reach the 'sweet-spot everywhere' regime of a SQUID device with a stable coherence time over a full flux quantum. Close to the flux degeneracy point the device reveals tunneling physics between the two quasi-degenerate ground states with typical observed lifetimes on the order of minutes. In the future, this qubit regime could be used to avoid leakage to unconfined transmon states in high-power read-out or driven-dissipative bosonic qubit realizations. Moreover, the combination of well controllable plasmon transitions together with stable fluxon states in a single device might offer a way forward towards improved qubit encoding schemes.

DOI
10.48550/arxiv.2202.13917

Related papers

Inductively shunted transmons exhibit noise insensitive plasmon states and a fluxon decay exceeding 3 hours

Farid Hassani, Matilda Peruzzo, Lucky N. Kapoor +3 more

Currently available quantum processors are dominated by noise, which severely limits their applicability and motivates the search for new physical qubit encodings. In this work, we introduce the inductively shunted transmon, a weakly flux-tunable superconducting qubit that offers charge offset protection for all levels and a 20-fold reduction in flux dispersion compared to the state-of-the-art resulting in a constant coherence over a full flux quantum. The parabolic confinement provided by the inductive shunt as well as the linearity of the geometric superinductor facilitates a high-power readout that resolves quantum jumps with a fidelity and QND-ness of >90% and without the need for a Josephson parametric amplifier. Moreover, the device reveals quantum tunneling physics between the two prepared fluxon ground states with a measured average decay time of up to 3.5 h. In the future, fast time-domain control of the transition matrix elements could offer a new path forward to also achieve full qubit control in the decay-protected fluxon basis.

Nature Communications•Jul 5, 2023•23 citations

Flux-insensitive qubit from a split transmon shunted with a Josephson junction

Xiao Geng, Linpan Jiang, Mingjun Cheng +2 more

Split transmons have been widely used in making quantum processors for building scalable and fault-tolerant superconducting quantum computers. With tunable external flux threading the superconducting quantum interference devices (SQUIDs) of qubits, split transmons have a degree of freedom for tuning frequencies but introduce flux noise as an important dephasing factor at the same time. Here, an improved version of a transmon is proposed and is called a ``triple-Josephson-junction transmon'' (tri-JJ transmon). A tri-JJ transmon is obtained by shunting another Josephson junction to the SQUID of a split transmon, which can produce much more different local minima and maxima of qubit frequencies tuned by external flux as ``sweet spots'' than those of split transmons. The first-order effect of the flux noise at the sweet spots can be eliminated and the corresponding pure-dephasing times are estimated as about $200\phantom{\rule{4pt}{0ex}}\textmu{}\mathrm{s}$ by considering only critical current noise. Tri-JJ transmons are compatible with the process and the protocol of control and measurement of split transmons and can be competitive candidates for constructing a high-performance superconducting quantum processor.

Physical Review A•Dec 13, 2024•0 citations

Anharmonic tunable coupler with inductively shunted transmon

Yu Feng Zhang, Lian-Lian Zhang, Shuang Xu

Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.

Physica Scripta•Mar 13, 2025•0 citations

Complementing the transmon by integrating a geometric shunt inductor

Simone D Fasciati, Boris Shteynas, Giulio Campanaro +5 more

We realize a single-Josephson-junction transmon qubit shunted by a simple geometric inductor. We couple it capacitively to a conventional transmon and show that the ZZ interaction between the two qubits is completely suppressed when they are flux-biased to have opposite-sign anharmonicities. Away from the flux sweet spot of the inductively-shunted transmon, we demonstrate fast two-qubit interactions using first-order sideband transitions. The simplicity of this two-qubit-species circuit makes it promising for building large lattices of superconducting qubits with low coherent error and a rich gate set.

arXiv:2410.10416•Oct 14, 2024•1 citation

Measurement-Induced State transitions in Inductively-Shunted Transmons

Nicholas Zobrist, John Mark Kreikebaum, Mostafa Khezri +6 more

Fast and high-fidelity qubit measurement plays a key role in quantum error correction. In superconducting qubits, measurement is typically performed using a resonant microwave drive on a readout resonator dispersively coupled to the qubit. Shorter measurement times require larger numbers of photons populating the readout resonator, which ultimately leads to undesired measurementinduced state transitions (MIST) of the qubit. MIST can be particularly problematic because these transitions often leave the qubit in a high energy state, and the MIST locations in readout parameter space drift as a function of qubit offset charge. In transmon qubits, these drifts have been avoided using very large qubit-resonator detunings or dedicated offset charge biases. In this work, we take an alternative approach and add an inductive shunt to the transmon to eliminate the offset charge dependence and stabilize the MIST. We experimentally characterize MIST in several different inductively-shunted transmons, in agreement with quantum and semiclassical models for MIST. These results extend to other inductively-shunted qubits.

quant-pharXiv:2603.12114•Mar 13, 2026•0 citations

The road to long coherence time superconducting quantum bits

Dongning Zheng, Yirong Jin

Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.

Chinese Science Bulletin (Chinese Version)•Sep 27, 2017•2 citations
The inductively shunted transmon (IST) is a superconducting qubit with exponentially suppressed fluxon transitions and a plasmon spectrum approximating that of the transmon. It shares many characteristics with the transmon but offers charge offset insensitivity for all levels and precise flux tunability with quadratic flux noise suppression. In this work we propose and realize IST qubits deep in the transmon limit where the large geometric inductance acts as a mere perturbation. With a flux dispersion of only 5.1 MHz we reach the 'sweet-spot everywhere' regime of a SQUID device with a stable coherence time over a full flux quantum. Close to the flux degeneracy point the device reveals tunneling physics between the two quasi-degenerate ground states with typical observed lifetimes on the order of minutes. In the future, this qubit regime could be used to avoid leakage to unconfined transmon states in high-power read-out or driven-dissipative bosonic qubit realizations. Moreover, the combination of well controllable plasmon transitions together with stable fluxon states in a single device might offer a way forward towards improved qubit encoding schemes.
Currently available quantum processors are dominated by noise, which severely limits their applicability and motivates the search for new physical qubit encodings. In this work, we introduce the inductively shunted transmon, a weakly flux-tunable superconducting qubit that offers charge offset protection for all levels and a 20-fold reduction in flux dispersion compared to the state-of-the-art resulting in a constant coherence over a full flux quantum. The parabolic confinement provided by the inductive shunt as well as the linearity of the geometric superinductor facilitates a high-power readout that resolves quantum jumps with a fidelity and QND-ness of >90% and without the need for a Josephson parametric amplifier. Moreover, the device reveals quantum tunneling physics between the two prepared fluxon ground states with a measured average decay time of up to 3.5 h. In the future, fast time-domain control of the transition matrix elements could offer a new path forward to also achieve full qubit control in the decay-protected fluxon basis.
Split transmons have been widely used in making quantum processors for building scalable and fault-tolerant superconducting quantum computers. With tunable external flux threading the superconducting quantum interference devices (SQUIDs) of qubits, split transmons have a degree of freedom for tuning frequencies but introduce flux noise as an important dephasing factor at the same time. Here, an improved version of a transmon is proposed and is called a ``triple-Josephson-junction transmon'' (tri-JJ transmon). A tri-JJ transmon is obtained by shunting another Josephson junction to the SQUID of a split transmon, which can produce much more different local minima and maxima of qubit frequencies tuned by external flux as ``sweet spots'' than those of split transmons. The first-order effect of the flux noise at the sweet spots can be eliminated and the corresponding pure-dephasing times are estimated as about $200\phantom{\rule{4pt}{0ex}}\textmu{}\mathrm{s}$ by considering only critical current noise. Tri-JJ transmons are compatible with the process and the protocol of control and measurement of split transmons and can be competitive candidates for constructing a high-performance superconducting quantum processor.
Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.
We realize a single-Josephson-junction transmon qubit shunted by a simple geometric inductor. We couple it capacitively to a conventional transmon and show that the ZZ interaction between the two qubits is completely suppressed when they are flux-biased to have opposite-sign anharmonicities. Away from the flux sweet spot of the inductively-shunted transmon, we demonstrate fast two-qubit interactions using first-order sideband transitions. The simplicity of this two-qubit-species circuit makes it promising for building large lattices of superconducting qubits with low coherent error and a rich gate set.
Fast and high-fidelity qubit measurement plays a key role in quantum error correction. In superconducting qubits, measurement is typically performed using a resonant microwave drive on a readout resonator dispersively coupled to the qubit. Shorter measurement times require larger numbers of photons populating the readout resonator, which ultimately leads to undesired measurementinduced state transitions (MIST) of the qubit. MIST can be particularly problematic because these transitions often leave the qubit in a high energy state, and the MIST locations in readout parameter space drift as a function of qubit offset charge. In transmon qubits, these drifts have been avoided using very large qubit-resonator detunings or dedicated offset charge biases. In this work, we take an alternative approach and add an inductive shunt to the transmon to eliminate the offset charge dependence and stabilize the MIST. We experimentally characterize MIST in several different inductively-shunted transmons, in agreement with quantum and semiclassical models for MIST. These results extend to other inductively-shunted qubits.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.