Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Flux-insensitive qubit from a split transmon shunted with a Josephson junction

Xiao Geng, Linpan Jiang, Mingjun Cheng, Jianshe Liu, Wei Chen

Published Dec 13, 2024• 0 citations
Publisher

Abstract

Split transmons have been widely used in making quantum processors for building scalable and fault-tolerant superconducting quantum computers. With tunable external flux threading the superconducting quantum interference devices (SQUIDs) of qubits, split transmons have a degree of freedom for tuning frequencies but introduce flux noise as an important dephasing factor at the same time. Here, an improved version of a transmon is proposed and is called a ``triple-Josephson-junction transmon'' (tri-JJ transmon). A tri-JJ transmon is obtained by shunting another Josephson junction to the SQUID of a split transmon, which can produce much more different local minima and maxima of qubit frequencies tuned by external flux as ``sweet spots'' than those of split transmons. The first-order effect of the flux noise at the sweet spots can be eliminated and the corresponding pure-dephasing times are estimated as about $200\phantom{\rule{4pt}{0ex}}\textmu{}\mathrm{s}$ by considering only critical current noise. Tri-JJ transmons are compatible with the process and the protocol of control and measurement of split transmons and can be competitive candidates for constructing a high-performance superconducting quantum processor.

DOI
10.1103/physreva.110.062607

Related papers

A superconducting qubit with noise-insensitive plasmon levels and decay-protected fluxon states

Farid Hassani, Matilda Peruzzo, Lucky N. Kapoor +3 more

The inductively shunted transmon (IST) is a superconducting qubit with exponentially suppressed fluxon transitions and a plasmon spectrum approximating that of the transmon. It shares many characteristics with the transmon but offers charge offset insensitivity for all levels and precise flux tunability with quadratic flux noise suppression. In this work we propose and realize IST qubits deep in the transmon limit where the large geometric inductance acts as a mere perturbation. With a flux dispersion of only 5.1 MHz we reach the 'sweet-spot everywhere' regime of a SQUID device with a stable coherence time over a full flux quantum. Close to the flux degeneracy point the device reveals tunneling physics between the two quasi-degenerate ground states with typical observed lifetimes on the order of minutes. In the future, this qubit regime could be used to avoid leakage to unconfined transmon states in high-power read-out or driven-dissipative bosonic qubit realizations. Moreover, the combination of well controllable plasmon transitions together with stable fluxon states in a single device might offer a way forward towards improved qubit encoding schemes.

arXiv:2202.13917•Feb 28, 2022•3 citations

The road to long coherence time superconducting quantum bits

Dongning Zheng, Yirong Jin

Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.

Chinese Science Bulletin (Chinese Version)•Sep 27, 2017•2 citations

The C-shunt Flux Qubit: A New Generation of Superconducting Flux Qubit

Jeffrey Birenbaum

While quantum computation has the potential to revolutionize the scientific community, to date no architecture has been developed which offers the necessary combination of high coherence times and massive scalability. Superconducting flux qubits satisfy the second requirement well but to date useful devices are limited to coherence times of typically only a few &mus. In this dissertation we examine the possibilities of improving the coherence performance of the flux qubit to the levels required for fault-tolerant quantum computation. We find that coherence times for many devices are limited by photon-induced quasiparticles and mitigation of these quasiparticles increases coherence times by more than a factor of two. Beyond this, however, we find little improvement in flux qubit performance compared to prior results. Despite improved fabrication techniques and varied device designs we find flux qubit coherence times are still typically below 5 &mus. Furthermore, wide device-to-device variations are observed which prevent effective scaling of the flux qubit to quantum information circuits.Based on the proposal by You, et al. we develop of a capacitively-shunted version of the flux qubit called the C-shunt flux qubit. With the addition of a capacitive shunt across the small junction of the flux qubit we are able to reduce the amplitude sensitivity to both charge and flux noise by more than a factor of three. The result is a predicted ten-fold enhancement in the coherence times compared to the unshunted flux qubit. At the same time we preserve much of the anharmonicity of the flux qubit resulting in a device with coherence times comparable to modern transmons but with a factor of four better anharmonicity and more flexible coupling configurations.By using a high-quality MBE aluminum shunt process on an annealed sapphire substrate coupled with a more conventional electron-beam-evaporated aluminum Josephson junction process we fabricate hybrid C-shunt flux qubits. We also incorporate a new bridgeless junction technique which offers more robust and repeatable fabrication processing. This technique enables improved accuracy of the junction sizing, a trait which will become essential as we move to multi-qubit experiments. T1 and T2 times for these C-shunt devices reach in excess of 40 &mus at degeneracy, achieving the predicted ten-fold improvement based on the reduced noise sensitivity. At the same time we see decreased device-to-device variation with typical T1 times exceeding 20&ndash25 &mus at all bias points. Combined with the high anharmonicity and standard planar fabrication techniques these coherence times make the C-shunt flux qubit a competitive candidate for fault-tolerant quantum computation.

•Jan 1, 2014•3 citations

Charge- and Flux-Insensitive Tunable Superconducting Qubit

Eyob Alebachew Sete, Matthew J. Reagor, Nicolas Didier +1 more

A central challenge in building a scalable quantum computer with superconducting qubits is simultaneously achieving long coherence times and fast two-qubit gates. Currently, fast (tunable) gates are obtained at the expense of coherence time. The authors propose a ``flatsonium'' qubit, based on the highly nonlinear fluxonium qubit, that yields both coherence and tunability---jackpot. Dephasing due to global flux noise is reduced by engineering flux-insensitive sweet spots in the qubit spectrum at the frequencies of interest, while leakage errors are eliminated by the typically large anharmonicity of its energy spectrum.

arXiv:1703.04613•Physical Review Applied•Aug 7, 2017•14 citations

High-fidelity and robust controlled-Z gates for superconducting transmon qubits. I. Intrinsic errors and decoherence

Chia-Hsien Huang, Hsi-Sheng Goan

Fault-tolerant quantum computing requires quantum gates that combine short duration, high fidelity, and robustness to noise. As quantum processors scale, robustness becomes increasingly important because exhaustive characterization and frequent recalibration of individual gates become impractical. We present a comprehensive optimal-control framework for controlled-Z (CZ) gates between directly coupled, frequency-tunable transmons that systematically accounts for intrinsic Hamiltonian errors and realistic decoherence mechanisms, including energy relaxation and dephasing. Using smooth, single-shot flux pulses, we obtain 12-ns CZ gates---close to the theoretical speed limit of 11.6 ns---with intrinsic errors suppressed to the $2\times10^{-5}$ level. We construct dephasing noise models, calibrated against published experimental measurements, that capture fast dephasing from room-temperature control electronics and slow dephasing from $1/f$ flux noise. Using these models, we identify dephasing sweet spots that suppress sensitivity to dephasing noise. We further exploit transmon asymmetry as a design parameter to access distinct noise-resilient operating regimes. These results establish an experimentally applicable framework for balancing gate speed, fidelity, and noise robustness while reducing characterization and recalibration overhead.

quant-pharXiv:2610.30056•Oct 22, 2026•0 citations

Higher Josephson harmonics in a tunable double-junction transmon qubit

Ksenia Shagalov, David Feldstein-Bofill, Leo Uhre Jakobsen +11 more

Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to $\sim10\%$ of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.

quant-pharXiv:2512.08470•Physical Review Letters•Dec 10, 2025•1 citation
Split transmons have been widely used in making quantum processors for building scalable and fault-tolerant superconducting quantum computers. With tunable external flux threading the superconducting quantum interference devices (SQUIDs) of qubits, split transmons have a degree of freedom for tuning frequencies but introduce flux noise as an important dephasing factor at the same time. Here, an improved version of a transmon is proposed and is called a triple-Josephson-junction transmon'' (tri-JJ transmon). A tri-JJ transmon is obtained by shunting another Josephson junction to the SQUID of a split transmon, which can produce much more different local minima and maxima of qubit frequencies tuned by external flux as sweet spots'' than those of split transmons. The first-order effect of the flux noise at the sweet spots can be eliminated and the corresponding pure-dephasing times are estimated as about 200\textmus200\phantom{\rule{4pt}{0ex}}\textmu{}\mathrm{s}200\textmus by considering only critical current noise. Tri-JJ transmons are compatible with the process and the protocol of control and measurement of split transmons and can be competitive candidates for constructing a high-performance superconducting quantum processor.
The inductively shunted transmon (IST) is a superconducting qubit with exponentially suppressed fluxon transitions and a plasmon spectrum approximating that of the transmon. It shares many characteristics with the transmon but offers charge offset insensitivity for all levels and precise flux tunability with quadratic flux noise suppression. In this work we propose and realize IST qubits deep in the transmon limit where the large geometric inductance acts as a mere perturbation. With a flux dispersion of only 5.1 MHz we reach the 'sweet-spot everywhere' regime of a SQUID device with a stable coherence time over a full flux quantum. Close to the flux degeneracy point the device reveals tunneling physics between the two quasi-degenerate ground states with typical observed lifetimes on the order of minutes. In the future, this qubit regime could be used to avoid leakage to unconfined transmon states in high-power read-out or driven-dissipative bosonic qubit realizations. Moreover, the combination of well controllable plasmon transitions together with stable fluxon states in a single device might offer a way forward towards improved qubit encoding schemes.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
While quantum computation has the potential to revolutionize the scientific community, to date no architecture has been developed which offers the necessary combination of high coherence times and massive scalability. Superconducting flux qubits satisfy the second requirement well but to date useful devices are limited to coherence times of typically only a few &mus. In this dissertation we examine the possibilities of improving the coherence performance of the flux qubit to the levels required for fault-tolerant quantum computation. We find that coherence times for many devices are limited by photon-induced quasiparticles and mitigation of these quasiparticles increases coherence times by more than a factor of two. Beyond this, however, we find little improvement in flux qubit performance compared to prior results. Despite improved fabrication techniques and varied device designs we find flux qubit coherence times are still typically below 5 &mus. Furthermore, wide device-to-device variations are observed which prevent effective scaling of the flux qubit to quantum information circuits.Based on the proposal by You, et al. we develop of a capacitively-shunted version of the flux qubit called the C-shunt flux qubit. With the addition of a capacitive shunt across the small junction of the flux qubit we are able to reduce the amplitude sensitivity to both charge and flux noise by more than a factor of three. The result is a predicted ten-fold enhancement in the coherence times compared to the unshunted flux qubit. At the same time we preserve much of the anharmonicity of the flux qubit resulting in a device with coherence times comparable to modern transmons but with a factor of four better anharmonicity and more flexible coupling configurations.By using a high-quality MBE aluminum shunt process on an annealed sapphire substrate coupled with a more conventional electron-beam-evaporated aluminum Josephson junction process we fabricate hybrid C-shunt flux qubits. We also incorporate a new bridgeless junction technique which offers more robust and repeatable fabrication processing. This technique enables improved accuracy of the junction sizing, a trait which will become essential as we move to multi-qubit experiments. T1 and T2 times for these C-shunt devices reach in excess of 40 &mus at degeneracy, achieving the predicted ten-fold improvement based on the reduced noise sensitivity. At the same time we see decreased device-to-device variation with typical T1 times exceeding 20&ndash25 &mus at all bias points. Combined with the high anharmonicity and standard planar fabrication techniques these coherence times make the C-shunt flux qubit a competitive candidate for fault-tolerant quantum computation.
A central challenge in building a scalable quantum computer with superconducting qubits is simultaneously achieving long coherence times and fast two-qubit gates. Currently, fast (tunable) gates are obtained at the expense of coherence time. The authors propose a ``flatsonium'' qubit, based on the highly nonlinear fluxonium qubit, that yields both coherence and tunability---jackpot. Dephasing due to global flux noise is reduced by engineering flux-insensitive sweet spots in the qubit spectrum at the frequencies of interest, while leakage errors are eliminated by the typically large anharmonicity of its energy spectrum.
Fault-tolerant quantum computing requires quantum gates that combine short duration, high fidelity, and robustness to noise. As quantum processors scale, robustness becomes increasingly important because exhaustive characterization and frequent recalibration of individual gates become impractical. We present a comprehensive optimal-control framework for controlled-Z (CZ) gates between directly coupled, frequency-tunable transmons that systematically accounts for intrinsic Hamiltonian errors and realistic decoherence mechanisms, including energy relaxation and dephasing. Using smooth, single-shot flux pulses, we obtain 12-ns CZ gates---close to the theoretical speed limit of 11.6 ns---with intrinsic errors suppressed to the 2×10−52\times10^{-5}2×10−5 level. We construct dephasing noise models, calibrated against published experimental measurements, that capture fast dephasing from room-temperature control electronics and slow dephasing from 1/f1/f1/f flux noise. Using these models, we identify dephasing sweet spots that suppress sensitivity to dephasing noise. We further exploit transmon asymmetry as a design parameter to access distinct noise-resilient operating regimes. These results establish an experimentally applicable framework for balancing gate speed, fidelity, and noise robustness while reducing characterization and recalibration overhead.
Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to ∼10%\sim10\%∼10% of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.