Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2109.03023 · Physical Review Applied

Cooper-Pair Box Coupled to Two Resonators: An Architecture for a Quantum Refrigerator

Andrew Guthrie, Christoforus Dimas Satrya, Yu-Cheng Chang, Paul Menczel, Franco Nori, Jukka P Pekola

Published Jun 10, 2022• 29 citations
arXivHTMLPDF

Abstract

Superconducting circuits present a promising platform with which to realize a quantum refrigerator. Motivated by this, we fabricate and perform spectroscopy of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar-waveguide resonators with different frequencies. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at gigahertz frequencies. We go on to discuss how the measured device could be modified to operate as a cyclic quantum refrigerator by terminating the resonators with normal-metal resistors acting as heat baths.

DOI
10.1103/physrevapplied.17.064022

Related papers

A Cooper-Pair Box Architecture for Cyclic Quantum Heat Engines

Andrew Guthrie, Christoforus Dimas Satrya, Yu-Cheng Chang +3 more

Here we present an architecture for the implementation of cyclic quantum thermal engines using a superconducting circuit. The quantum engine consists of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar waveguide resonators with different frequencies, acting as thermal baths. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at GHz frequencies. By terminating the resonators of the measured structure with normal-metal resistors whose temperature can be controlled and monitored, a quantum heat engine or refrigerator could be realized. Furthermore, we numerically evaluate the performance of our setup acting as a quantum Otto-refrigerator in the presence of realistic environmental decoherence.

•Sep 7, 2021•3 citations

Fast-tunable resonators and quantum electrical circuits.

Martin Sandberg

In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.

•Jan 1, 2009•1 citation

Cooper pair box circuits (two-qubit gate, single-shot readout, and current to frequency conversion)

François Nguyen, ESTEVE, Daniel

During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.

•Jan 1, 2008•0 citations

Quantum coherent dynamics of two coupled superconducting charge qubits

Yu. A. Pashkin, O. V. Astafiev, Tsuyoshi Yamamoto +5 more

We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 1, 2005•0 citations

Coupled Dynamics of a Nanomechanical Resonator and Superconducting Quantum Circuits

Junho Suh

The coupled dynamics of a nanomechanical resonator and superconducting quantum circuits are studied in three experiments, in the context of studying the quantum limit for force detection and quantum physics of macroscopic objects. In the first experiment, the dispersive mechanical resonance shift from the interaction with a Cooper-pair box qubit is studied. The measured coupling strength is large enough to satisfy one of the conditions required to perform many of the proposed quantum nanomechanical measurements. The resonance shift also probes the microwave-driven response of the qubit, showing Rabi oscillation and Landau-Zener tunneling, proving the coherent dynamics of the qubit. Second, the parametric excitation of nanomechanical motion is studied via experiments with a driven qubit. Degenerate parametric amplification and oscillation are demonstrated, with a new observation of nonlinear dissipation. The squeezing of the back-action noise from the detection amplifier is also observed, up to 4dB. It is the first demonstration using a qubit as an auxiliary system to modify the nanomechanical dynamics, showing a possible route for generation of nanomechanical quantum states. Finally, back-action cooling of nanomechanical motion has been investigated, which is implemented by capacitively coupling a high-Q coplanar waveguide microwave resonator to a nanomechanical resonator. The thermal state with 7.5 mechanical quanta on average is reached, a result that is ultimately limited due to increased bath heating with microwave power. The heating is consistent with a model based on two-level systems resonantly coupled to the nanomechanical mode. This additional heating suggests future efforts to improve coupling and for reducing two-level system density in materials employed to reach the motional ground state via back-action cooling.

•May 17, 2011•1 citation

Control the qubit-qubit coupling with double superconducting resonators

Hui Wang, Rui Wang, Daichi Sugiyama +5 more

We experimentally studied the switching off processes in the double-resonator coupler superconducting quantum circuit. In both frequency and time-domain, we observed the variation of qubit-qubit effective coupling by tuning the frequency differences between qubits and the double-resonator coupler. According to the measurement results, by just shifting about 50 MHz of qubits' frequencies, we can tune the effective qubit-qubit coupling strength from switching off point to two qubit gate point (effective coupling larger than 5 MHz) in double-resonator superconducting quantum circuit.The double-resonator (coupler) superconducting quantum circuit has the advantage of simple fabrications, introducing less flux noises, reducing occupancy of dilution refrigerator cables,which might supply a promising platform for future large-scale superconducting quantum processors.

quant-pharXiv:2602.11576•Journal of the Physical Society of Japan•Feb 13, 2026•0 citations
Superconducting circuits present a promising platform with which to realize a quantum refrigerator. Motivated by this, we fabricate and perform spectroscopy of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar-waveguide resonators with different frequencies. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at gigahertz frequencies. We go on to discuss how the measured device could be modified to operate as a cyclic quantum refrigerator by terminating the resonators with normal-metal resistors acting as heat baths.
Here we present an architecture for the implementation of cyclic quantum thermal engines using a superconducting circuit. The quantum engine consists of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar waveguide resonators with different frequencies, acting as thermal baths. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at GHz frequencies. By terminating the resonators of the measured structure with normal-metal resistors whose temperature can be controlled and monitored, a quantum heat engine or refrigerator could be realized. Furthermore, we numerically evaluate the performance of our setup acting as a quantum Otto-refrigerator in the presence of realistic environmental decoherence.
In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.
During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.
We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.
The coupled dynamics of a nanomechanical resonator and superconducting quantum circuits are studied in three experiments, in the context of studying the quantum limit for force detection and quantum physics of macroscopic objects. In the first experiment, the dispersive mechanical resonance shift from the interaction with a Cooper-pair box qubit is studied. The measured coupling strength is large enough to satisfy one of the conditions required to perform many of the proposed quantum nanomechanical measurements. The resonance shift also probes the microwave-driven response of the qubit, showing Rabi oscillation and Landau-Zener tunneling, proving the coherent dynamics of the qubit. Second, the parametric excitation of nanomechanical motion is studied via experiments with a driven qubit. Degenerate parametric amplification and oscillation are demonstrated, with a new observation of nonlinear dissipation. The squeezing of the back-action noise from the detection amplifier is also observed, up to 4dB. It is the first demonstration using a qubit as an auxiliary system to modify the nanomechanical dynamics, showing a possible route for generation of nanomechanical quantum states. Finally, back-action cooling of nanomechanical motion has been investigated, which is implemented by capacitively coupling a high-Q coplanar waveguide microwave resonator to a nanomechanical resonator. The thermal state with 7.5 mechanical quanta on average is reached, a result that is ultimately limited due to increased bath heating with microwave power. The heating is consistent with a model based on two-level systems resonantly coupled to the nanomechanical mode. This additional heating suggests future efforts to improve coupling and for reducing two-level system density in materials employed to reach the motional ground state via back-action cooling.
We experimentally studied the switching off processes in the double-resonator coupler superconducting quantum circuit. In both frequency and time-domain, we observed the variation of qubit-qubit effective coupling by tuning the frequency differences between qubits and the double-resonator coupler. According to the measurement results, by just shifting about 50 MHz of qubits' frequencies, we can tune the effective qubit-qubit coupling strength from switching off point to two qubit gate point (effective coupling larger than 5 MHz) in double-resonator superconducting quantum circuit.The double-resonator (coupler) superconducting quantum circuit has the advantage of simple fabrications, introducing less flux noises, reducing occupancy of dilution refrigerator cables,which might supply a promising platform for future large-scale superconducting quantum processors.