Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2108.11341 · AVS Quantum Science

Driven quantum harmonic oscillators: A working medium for thermal machines

Heather Leitch, Nicolò Piccione, Bruno Bellomo, Gabriele De Chiara

Published Feb 3, 2022• 20 citations
arXivHTMLPDF

Abstract

The study of quantum thermodynamics is key to the development of quantum thermal machines. In contrast to most of the previous proposals based on discrete strokes, here we consider a working substance that is permanently coupled to two or more baths at different temperatures and continuously driven. To this end, we investigate parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and power of the working device, which can operate as an engine, refrigerator, or accelerator, and analyze the instantaneous and average efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to a dissipator. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.

DOI
10.1116/5.0072067

Related papers

Thermodynamics of driven quantum harmonic oscillators

Heather Leitch, Nicolò Piccione, Bruno Bellomo +1 more

The study of quantum thermodynamics is key to the development of quantum thermal machines. Here we investigate a system of parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and work power of the working device which can operate as an engine or a refrigerator and analyse their instantaneous and averages efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to an accelerator or a heater. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.

•Aug 25, 2021•0 citations

Heat transport in quantum devices

Heather Leitch

We use the theory of open quantum systems to study quantum thermal machines, deriving their master equations to understand how they evolve in time. We consider three different working substances coupled to heat baths that may act as engines, refrigerators, accelerators or dissipators. The first is a network of driven quantum harmonic oscillators where we study the effect that the driving speed has on the operation of the system. We see how squeezing one of the baths may lead to a more efficient engine as well as the generation of entanglement within the system. We then investigate the use of coherence in the baths as a resource to improve the performance of a quantum thermal machine whose working substance consists of a single qubit. Finally, we introduce a rotor to a system of two qubits to create an autonomous quantum machine capable of converting heat flow into useful mechanical work. We also study both the heat and angular momentum rectification that may be accomplished by this machine.

•Oct 1, 2026•0 citations

Measurement-driven single temperature engine

Xuehao Ding, Juyeon Yi, Yong Woon Kim +1 more

A four-stroke quantum engine which alternately interacts with a measurement apparatus and a single heat bath is discussed in detail with respect to the average work and heat as well as to the fluctuations of work and heat. The efficiency and the reliability of such an engine with a harmonic oscillator as working substance are analyzed under different conditions, such as different speeds of the work strokes, different temperatures of the heat bath, and various strengths of the energy supplying measurement. For imperfect thermalization strokes of finite duration also the power of the engine is analyzed. A comparison with a two-temperature Otto engine is provided in the particular case of adiabatic work and ideal thermalization strokes.

arXiv:1803.07621•Physical review. E•Oct 10, 2018•82 citations

Finite-time quantum Stirling heat engine

S Hamedani Raja, Sabrina Maniscalco, G S Paraoanu +2 more

Abstract We study the thermodynamic performance of a finite-time non-regenerative quantum Stirling-like cycle used as a heat engine. We consider specifically the case in which the working substance (WS) is a two-level system (TLS). The Stirling cycle is made of two isochoric transformations separated by a compression and an expansion stroke during which the WS is in contact with a thermal reservoir. To describe these two strokes we derive a non-Markovian master equation which allows to study the real-time dynamics of a driven open quantum system with arbitrary fast driving. Following the real-time dynamics of the WS using this master equation, the endpoints of the isotherms can deviate from the equilibrium thermal states. The role of this deviation in the performance of the heat engine is addressed. We found that the finite-time dynamics and thermodynamics of the cycle depend non-trivially on the different time scales at play. In particular, driving the WS at a time scale comparable to the resonance time of the bath enhances the performance of the cycle and allows for an efficiency higher than the efficiency of the quasistatic cycle, but still below the Carnot bound. However, by adding thermalization of the WS with the baths at the end of compression/expansion processes one recovers the conventional scenario in which efficiency decreases by speeding up the processes. In addition, the performance of the cycle is dependent on the compression/expansion speeds asymmetrically, which suggests new freedom in optimizing quantum heat engines. The maximum output power and the maximum efficiency are obtained almost simultaneously when the real-time endpoints of the compression/expansion processes are considered instead of the equilibrium thermal endpoint states. However, the net extractable work always declines by speeding up the drive.

arXiv:2009.10038•New Journal of Physics•Feb 25, 2021•50 citations

Efficiency and thermodynamic uncertainty relations of a dynamical quantum heat engine

Luca Razzoli, Fabio Cavaliere, Matteo Carrega +2 more

Abstract In the quest for high-performance quantum thermal machines, looking for an optimal thermodynamic efficiency is only part of the issue. Indeed, at the level of quantum devices, fluctuations become extremely relevant and need to be taken into account. In this paper we study the thermodynamic uncertainty relations for a quantum thermal machine with a quantum harmonic oscillator as a working medium, connected to two thermal baths, one of which is dynamically coupled. We show that parameters can be found such that the machine operates both as a quantum engine or refrigerator, with both sizeable efficiency and small fluctuations.

arXiv:2303.15773•The European Physical Journal Special Topics•Aug 7, 2023•7 citations

Quantum refrigerators and the third law of thermodynamics

Amikam Levy, Robert Alicki, Ronnie Kosloff

The rate of temperature decrease of a cooled quantum bath is studied as its temperature is reduced to absolute zero. The third law of thermodynamics is then quantified dynamically by evaluating the characteristic exponent ζ of the cooling process dT(t)/dt∼-T^{ζ} when approaching absolute zero, T→0. A continuous model of a quantum refrigerator is employed consisting of a working medium composed either by two coupled harmonic oscillators or two coupled two-level systems. The refrigerator is a nonlinear device merging three currents from three heat baths: a cold bath to be cooled, a hot bath as an entropy sink, and a driving bath which is the source of cooling power. A heat-driven refrigerator (absorption refrigerator) is compared to a power-driven refrigerator. When optimized, both cases lead to the same exponent ζ, showing a lack of dependence on the form of the working medium and the characteristics of the drivers. The characteristic exponent is therefore determined by the properties of the cold reservoir and its interaction with the system. Two generic heat bath models are considered: a bath composed of harmonic oscillators and a bath composed of ideal Bose/Fermi gas. The restrictions on the interaction Hamiltonian imposed by the third law are discussed. In the Appendices, the theory of periodically driven open systems and its implication for thermodynamics are outlined.

arXiv:1205.1347•Physical Review E•Jun 26, 2012•191 citations
The study of quantum thermodynamics is key to the development of quantum thermal machines. In contrast to most of the previous proposals based on discrete strokes, here we consider a working substance that is permanently coupled to two or more baths at different temperatures and continuously driven. To this end, we investigate parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and power of the working device, which can operate as an engine, refrigerator, or accelerator, and analyze the instantaneous and average efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to a dissipator. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.
The study of quantum thermodynamics is key to the development of quantum thermal machines. Here we investigate a system of parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and work power of the working device which can operate as an engine or a refrigerator and analyse their instantaneous and averages efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to an accelerator or a heater. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.
We use the theory of open quantum systems to study quantum thermal machines, deriving their master equations to understand how they evolve in time. We consider three different working substances coupled to heat baths that may act as engines, refrigerators, accelerators or dissipators. The first is a network of driven quantum harmonic oscillators where we study the effect that the driving speed has on the operation of the system. We see how squeezing one of the baths may lead to a more efficient engine as well as the generation of entanglement within the system. We then investigate the use of coherence in the baths as a resource to improve the performance of a quantum thermal machine whose working substance consists of a single qubit. Finally, we introduce a rotor to a system of two qubits to create an autonomous quantum machine capable of converting heat flow into useful mechanical work. We also study both the heat and angular momentum rectification that may be accomplished by this machine.
A four-stroke quantum engine which alternately interacts with a measurement apparatus and a single heat bath is discussed in detail with respect to the average work and heat as well as to the fluctuations of work and heat. The efficiency and the reliability of such an engine with a harmonic oscillator as working substance are analyzed under different conditions, such as different speeds of the work strokes, different temperatures of the heat bath, and various strengths of the energy supplying measurement. For imperfect thermalization strokes of finite duration also the power of the engine is analyzed. A comparison with a two-temperature Otto engine is provided in the particular case of adiabatic work and ideal thermalization strokes.
Abstract We study the thermodynamic performance of a finite-time non-regenerative quantum Stirling-like cycle used as a heat engine. We consider specifically the case in which the working substance (WS) is a two-level system (TLS). The Stirling cycle is made of two isochoric transformations separated by a compression and an expansion stroke during which the WS is in contact with a thermal reservoir. To describe these two strokes we derive a non-Markovian master equation which allows to study the real-time dynamics of a driven open quantum system with arbitrary fast driving. Following the real-time dynamics of the WS using this master equation, the endpoints of the isotherms can deviate from the equilibrium thermal states. The role of this deviation in the performance of the heat engine is addressed. We found that the finite-time dynamics and thermodynamics of the cycle depend non-trivially on the different time scales at play. In particular, driving the WS at a time scale comparable to the resonance time of the bath enhances the performance of the cycle and allows for an efficiency higher than the efficiency of the quasistatic cycle, but still below the Carnot bound. However, by adding thermalization of the WS with the baths at the end of compression/expansion processes one recovers the conventional scenario in which efficiency decreases by speeding up the processes. In addition, the performance of the cycle is dependent on the compression/expansion speeds asymmetrically, which suggests new freedom in optimizing quantum heat engines. The maximum output power and the maximum efficiency are obtained almost simultaneously when the real-time endpoints of the compression/expansion processes are considered instead of the equilibrium thermal endpoint states. However, the net extractable work always declines by speeding up the drive.
Abstract In the quest for high-performance quantum thermal machines, looking for an optimal thermodynamic efficiency is only part of the issue. Indeed, at the level of quantum devices, fluctuations become extremely relevant and need to be taken into account. In this paper we study the thermodynamic uncertainty relations for a quantum thermal machine with a quantum harmonic oscillator as a working medium, connected to two thermal baths, one of which is dynamically coupled. We show that parameters can be found such that the machine operates both as a quantum engine or refrigerator, with both sizeable efficiency and small fluctuations.
The rate of temperature decrease of a cooled quantum bath is studied as its temperature is reduced to absolute zero. The third law of thermodynamics is then quantified dynamically by evaluating the characteristic exponent ζ of the cooling process dT(t)/dt∼-T^{ζ} when approaching absolute zero, T→0. A continuous model of a quantum refrigerator is employed consisting of a working medium composed either by two coupled harmonic oscillators or two coupled two-level systems. The refrigerator is a nonlinear device merging three currents from three heat baths: a cold bath to be cooled, a hot bath as an entropy sink, and a driving bath which is the source of cooling power. A heat-driven refrigerator (absorption refrigerator) is compared to a power-driven refrigerator. When optimized, both cases lead to the same exponent ζ, showing a lack of dependence on the form of the working medium and the characteristics of the drivers. The characteristic exponent is therefore determined by the properties of the cold reservoir and its interaction with the system. Two generic heat bath models are considered: a bath composed of harmonic oscillators and a bath composed of ideal Bose/Fermi gas. The restrictions on the interaction Hamiltonian imposed by the third law are discussed. In the Appendices, the theory of periodically driven open systems and its implication for thermodynamics are outlined.