A four-stroke quantum engine which alternately interacts with a measurement apparatus and a single heat bath is discussed in detail with respect to the average work and heat as well as to the fluctuations of work and heat. The efficiency and the reliability of such an engine with a harmonic oscillator as working substance are analyzed under different conditions, such as different speeds of the work strokes, different temperatures of the heat bath, and various strengths of the energy supplying measurement. For imperfect thermalization strokes of finite duration also the power of the engine is analyzed. A comparison with a two-temperature Otto engine is provided in the particular case of adiabatic work and ideal thermalization strokes.
A four-stroke quantum engine which alternately interacts with a measurement apparatus and a single heat bath is discussed in detail with respect to the average work and heat as well as to the fluctuations of work and heat. The efficiency and the reliability of such an engine with a harmonic oscillator as working substance are analyzed under different conditions, such as different speeds of the work strokes, different temperatures of the heat bath, and various strengths of the energy supplying measurement. For imperfect thermalization strokes of finite duration also the power of the engine is analyzed. A comparison with a two-temperature Otto engine is provided in the particular case of adiabatic work and ideal thermalization strokes.
The study of quantum thermodynamics is key to the development of quantum thermal machines. In contrast to most of the previous proposals based on discrete strokes, here we consider a working substance that is permanently coupled to two or more baths at different temperatures and continuously driven. To this end, we investigate parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and power of the working device, which can operate as an engine, refrigerator, or accelerator, and analyze the instantaneous and average efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to a dissipator. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.
Thermodynamic Performance of a Measurement-Driven Quantum Engine with a Two-Parameter (p,q)-Deformed Harmonic Oscillator
We address a measurement-driven, single-bath quantum engine that generates usable work using quantum measurement backaction. The working medium is a two-parameter (p,q)-deformed harmonic oscillator, whose nonlinear spectrum modifies the energy gaps sampled by a nonselective Gaussian measurement and the work exchanged during quasistatic adiabatic strokes. The cycle starts from a Gibbs state and consists of an adiabatic change of (ω,p,q), measurement of the final effective position quadrature, a reverse adiabatic stroke, and thermalization with the original bath. Using a consistent first-law convention, we derive the measurement heat, adiabatic work contributions, thermalization heat, and reduced working-medium efficiency. We also express the measurement stroke via a transition matrix and identify passivity/unitality conditions that ensure nonnegative measurement heat. Numerical scans show that, within the finite-basis, spectral-ordering, and engine-operation checks used in this work, deformation can enhance measurement-induced energy input and extracted work relative to the undeformed oscillator. The physical engine regime is selected by $\QM>0$, $\Wcyc<0$, $\QT<0$, and 0<η<1. The reported efficiency is reduced and excludes measurement-apparatus costs.
We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing predictions for the average energy change during the unitary work strokes and the average work from the standard two-projective measurement approach.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
Abstract In this work, we introduce a three-stroke quantum engine with a single-qubit working substance whose cycle consists of two strokes arise due to performing two distinct general quantum measurements and it is completed by thermalization through contact with a finite temperature thermal reservoir. It is demonstrated that energy is imported into the engine by first measurement channel and work (useful energy) is extracted from it, in a frictionless isentropic manner, by the second measurement channel. It is particularly shown that the engine is capable to have perfect efficiency. In continuation, we equip the engine cycle with two additional adiabatic strokes. As illustrated, the presence of adiabatic strokes in the cycle provide an improved lower bound for the parametrized efficiency range of the engine.
Quantum heat engines, compared to their classical counterparts, offer many advantages due to quantum effects. The study of different cycle modes contributes to the improvement of heat engine efficiency. In this paper, based on a quantum hybrid heat engine, we compare three cycle modes involving Bell-type quantum weak measurement (without observing the results) and two heat baths at different temperatures, where quantum weak measurements play the role of heat source. Thus, there are two types of heat sources and three processes involving heat absorption or release in our model. In other words, we study a multi-stroke quantum hybrid heat engine. Moreover, we further investigate three types of cycle modes using a working substance composed of a three-particle XXZ spin chain. In the adiabatic stroke, we select three Hamiltonian parameters and vary them adiabatically from their initial to final values, comparing their effects on engine efficiency. In particular, we examine how the ordering of the weak-measurement stroke and the adiabatic stroke influences heat absorption, heat release, and engine efficiency. Additionally, we analyze the impact of the high-temperature bath’s temperature and the weak-measurement strength on the engine efficiency.