Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2105.14003 · Applied Physics Letters

Environmental radiation impact on lifetimes and quasiparticle tunneling rates of fixed-frequency transmon qubits

R. T. Gordon, Conal E. Murray, Cihan Kurter, Martin Sandberg, Shawn A. Hall, K. Balakrishnan, Robert M. Shelby, Brent A. Wacaser, Adam Stabile, Jeffrey W. Sleight, Markus Brink, Mary Beth Rothwell, Kenneth P. Rodbell, Oliver Dial, Matthias Steffen

Published Feb 14, 2022• 61 citations
arXivHTMLPDF

Abstract

Quantum computing relies on the operation of qubits in an environment as free of noise as possible. Assessing the quality of this environment is a key aspect of ensuring high-fidelity implementations based on superconducting qubits. Relaxation, decoherence, dephasing, and quasiparticle tunneling rates have been measured for various shielding configurations used in the measurement environment for state-of-the-art transmon qubits. An ensemble of approximately 120 control devices was used for this study, with five different capacitor pad designs. The shielding elements varied in the configuration included an indium gasket at the qubit can's lid, Cryoperm magnetic shielding, the mixing chamber shield of the dilution refrigerator, the inclusion of a vacuum pump-out port, and capping unused subminiature version A connectors at the top of the measurement can's lid. It was found that the qubit lifetimes T1, T2, and Tϕ are robust to the all of configuration changes tried until the mixing chamber shield was removed, significantly increasing blackbody radiation levels in the qubit measurement space, where in that limit it was found that tapering the qubit pads reduced the amount of loss. In contrast, the quasiparticle tunneling rates were found to be extremely sensitive to all configuration changes tested. Consistent with earlier reports [McEwen et al., arXiv:2104.05219 (2021); Cardani et al., Nat. Commun. 12, 2733 (2021); Wilen et al., Nature 594, 369–373 (2021); Ristè et al. Nat. Commun. 4, 1913 (2013)], the findings from this study indicate that non-equilibrium quasiparticles do not currently limit the lifetimes of well-shielded transmon qubits.

DOI
10.1063/5.0078785

Related papers

Study of Quasiparticle Dynamics in Superconducting Transmon Qubits and Fabrication of Superconducting Air Bridges

Yi-Hsiang Huang

Micro-fabricated superconducting circuits have emerged as a leading candidate for quantum computers. However, typical error rates of 10-3 for quantum gates remain a challenge for performing error correction and need to be further decreased for achieving practical quantum computation. Improving qubit coherence times for superconducting qubits is a continuous endeavor in order to decrease error rates. As part of this effort, a topic addressed in this dissertation is the study of the generation mechanism and dynamics of non-equilibrium quasiparticles (QPs), which are electron-like excitations of a superconductor. This source of decoherence was studied by measuring the rate of single-electron changes in the parity state of multiple charge-sensitive transmon qubits under different conditions. The presence of non-equilibrium QPs in superconducting resonators and qubits operating at millikelvin temperature has been known for decades. Understanding the sources and dynamics of these QPs is crucial to evaluate and improve the performance of the devices. Specifically, for superconducting qubits, a single QP tunneling across the Josephson junction changes the total charge parity from even to odd or vice versa, and can induce energy relaxation and dephasing, limiting the coherence of the device. To study the dynamics of non-equilibrium QPs, I utilized a Ramsey-like pulse sequence to measure the rate of single-electron parity changes in transmon qubits, which had a weak charge dispersion, with different shunting capacitor geometries and materials. I started out by measuring a charge parity rate of ~ 33 s-1 for a grounded "x-mon" qubit and ~ 17 s-1 for a galvanically isolated "two-pads" qubit with our standard setup. These rates decreased to ~ 5 s-1 and ~ 2 s-1 for the x-mon and two-pads respectively when IR-filters and extra layers of shielding were installed. From my measurements, I found that the charge parity rates are sensitive to the geometry of the shunting capacitor, weakly depend on the amount of shielding surrounding the device, and independent of using Al or Ta for the superconducting shunting capacitor. To distinguish between two possible mechanisms for the parity switching, I measured the parity rates after cooling one of the qubit devices in an external magnetic field to induce vortices in the superconducting electrodes. After increasing the magnetic field above 23 μT, I measured a faster QP trapping rate and a much smaller T1, suggesting that at least one vortex was added to the superconducting electrode near the Josephson junction. On the other hand, the measured charge parity rates exhibited no clear dependence on the background QP trapping rates. These data suggest that a large portion of parity switching events occurs from QPs being produced at the Josephson junction, where pair-breaking radiation is rectified into QPs by the junction, as opposed to tunneling of QPs residing in the electrodes. To understand the difference in the measured parity rates, I simulated the absorption efficiency of pair-breaking radiation for my two designs and observed a similar difference in absorption rates when a single-mode blackbody radiation with an effective temperature T* ~ 300 mK was assumed to be illuminating the devices. This large T*, which is significantly higher than the device's nominal temperature of 20 mK, is consistent with values reported in the literature. However, its physical origin remains not fully understood. For the other part of my dissertation, I developed a new simplified process for making superconducting air bridges. Air bridges are used to suppress unwanted extraneous high frequency chip modes parasitic to superconducting quantum circuits that can couple to qubits and cause decoherence. Traditional ways of making air bridges utilize thermal reflow to create arched photoresist scaffolds that are limited in heights. This results in insufficient mechanical strength of the bridges which tend to collapse when spanning to larger lengths. My simplified fabrication method that utilizes two-photon lithography, a technique that enables creation of three-dimensional micron-scale structures, relaxes this limitation and is capable of making mechanically stable bridges with lengths up to 100 μm. The resulting Al air bridges, having a superconducting transition temperature of Tc = 1.08 mK and a dc residual resistivity ratio of 3.85, were confirmed to form a good electrical contact with the base metal layers and exhibit a small measurable amount of rf loss when placed over coplanar waveguide resonators, on par with other air bridge fabrication methods.

•Jan 1, 2025•0 citations

Millisecond charge-parity fluctuations and induced decoherence in a superconducting transmon qubit

Diego Ristè, Cornelis Christiaan Bultink, M. J. Tiggelman +3 more

The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.

arXiv:1212.5459•Nature Communications•May 28, 2013•257 citations

Demonstrating magnetic field robustness and reducing temporal T1 noise in transmon qubits through magnetic field engineering

Bektur Abdisatarov, Tanay Roy, Daniel Bafia +10 more

The coherence of superconducting transmon qubits is often disrupted by fluctuations in the energy relaxation time (T1), limiting their performance for quantum computing. While background magnetic fields can be harmful to superconducting devices, we demonstrate that both trapped magnetic flux and externally applied static magnetic fields can suppress temporal fluctuations in T1 without significantly degrading its average value or qubit frequency. Using a three-axis Helmholtz coil system, we applied calibrated magnetic fields perpendicular to the qubit plane during cooldown and operation. Remarkably, transmon qubits based on tantalum-capped niobium (Nb/Ta) capacitive pads and aluminum-based Josephson junctions (JJs) maintained T1 lifetimes near 300 μs even when cooled in fields as high as 600 mG. Both trapped flux up to 600 mG and applied fields up to 400 mG reduced T1 fluctuations by more than a factor of two, while higher field strengths caused rapid coherence degradation. We attribute this stabilization to the polarization of paramagnetic impurities, the role of trapped flux as a sink for non-equilibrium quasiparticles (QPs), and partial saturation of fluctuating two-level systems (TLSs). These findings challenge the conventional view that magnetic fields are inherently detrimental and introduce a strategy for mitigating noise in superconducting qubits, offering a practical path toward more stable and scalable quantum systems.

arXiv:2506.02187•Jun 2, 2025•0 citations

Real-Time Correlation of Relaxation, Dephasing, and Two-level System Dynamics in Transmon Qubits

Ambrose Yang, Alexander M. Young, Paal H. Prestegaard +13 more

Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.

quant-pharXiv:2610.34485•Oct 27, 2026•0 citations

Quasiparticle tunneling as a probe of Josephson junction barrier and capacitor material in superconducting qubits

Cihan Kurter, Conal E. Murray, R. T. Gordon +15 more

Abstract Non-equilibrium quasiparticles are possible sources for decoherence in superconducting qubits because they can lead to energy decay or dephasing upon tunneling across Josephson junctions (JJs). Here, we investigate the impact of the intrinsic properties of two-dimensional transmon qubits on quasiparticle tunneling (QPT) and discuss how we can use quasiparticle dynamics to gain critical information about the quality of JJ barrier. We find the tunneling rate of the non-equilibrium quasiparticles to be sensitive to the choice of the shunting capacitor material and their geometry in qubits. In some devices, we observe an anomalous temperature dependence of the QPT rate below 100 mK that deviates from a constant background associated with non-equilibrium quasiparticles. We speculate that this behavior is caused by high transmission sites/defects within the oxide barriers of the JJs, leading to spatially localized subgap states. We model this by assuming that such defects generate regions with a smaller effective gap. Our results present a unique in situ characterization tool to assess the uniformity of tunnel barriers in qubit junctions and shed light on how quasiparticles can interact with various elements of the qubit circuit.

arXiv:2106.11488•npj Quantum Information•Mar 21, 2022•32 citations

Evaluating Radiation Impact on Superconducting Transmon Qubits in Above and Underground Facilities

Tanay Roy, Francesco De Dominicis, Ambra Mariani +18 more

Superconducting qubits can be sensitive to sudden energy deposits into the substrate from cosmic rays and ambient radioactivity. While previous studies have primarily focused on exploring correlated effects over time and distance due to cosmic rays, this study uniquely offers a direct comparison of a transmon qubit's response at Fermilab SQMS above-ground facilities and the deep-underground Gran Sasso Laboratory (INFN-LNGS, Italy). Despite the vastly different radiation environments, we observe a similar average qubit lifetime (T1) of approximately 80 microseconds at both sites. We then employ a fast decay detection protocol and investigate the time structure, sensitivity, and relative rates of triggered events due to radiation versus intrinsic noise. We compare the above and underground performance of several high-coherence qubits with similar designs. Our findings reveal no significant difference in events with radiation-like signatures between above-ground and underground conditions for these sapphire and niobium-based transmon qubits. This suggests that most such events are likely due to other noise sources, which predominantly contribute to single-qubit errors in contemporary transmon qubits. By exposing the qubits to gamma sources with varying activity levels, we further evaluate their response to radiation in a low-background environment. The results show that qubits can indeed detect particle impacts; however, this capability is only realized by substantially reducing other noise sources, which in turn affects detection efficiency [1].

•Sep 20, 2024•0 citations
Quantum computing relies on the operation of qubits in an environment as free of noise as possible. Assessing the quality of this environment is a key aspect of ensuring high-fidelity implementations based on superconducting qubits. Relaxation, decoherence, dephasing, and quasiparticle tunneling rates have been measured for various shielding configurations used in the measurement environment for state-of-the-art transmon qubits. An ensemble of approximately 120 control devices was used for this study, with five different capacitor pad designs. The shielding elements varied in the configuration included an indium gasket at the qubit can's lid, Cryoperm magnetic shielding, the mixing chamber shield of the dilution refrigerator, the inclusion of a vacuum pump-out port, and capping unused subminiature version A connectors at the top of the measurement can's lid. It was found that the qubit lifetimes T1, T2, and Tϕ are robust to the all of configuration changes tried until the mixing chamber shield was removed, significantly increasing blackbody radiation levels in the qubit measurement space, where in that limit it was found that tapering the qubit pads reduced the amount of loss. In contrast, the quasiparticle tunneling rates were found to be extremely sensitive to all configuration changes tested. Consistent with earlier reports [McEwen et al., arXiv:2104.05219 (2021); Cardani et al., Nat. Commun. 12, 2733 (2021); Wilen et al., Nature 594, 369–373 (2021); Ristè et al. Nat. Commun. 4, 1913 (2013)], the findings from this study indicate that non-equilibrium quasiparticles do not currently limit the lifetimes of well-shielded transmon qubits.
Micro-fabricated superconducting circuits have emerged as a leading candidate for quantum computers. However, typical error rates of 10-3 for quantum gates remain a challenge for performing error correction and need to be further decreased for achieving practical quantum computation. Improving qubit coherence times for superconducting qubits is a continuous endeavor in order to decrease error rates. As part of this effort, a topic addressed in this dissertation is the study of the generation mechanism and dynamics of non-equilibrium quasiparticles (QPs), which are electron-like excitations of a superconductor. This source of decoherence was studied by measuring the rate of single-electron changes in the parity state of multiple charge-sensitive transmon qubits under different conditions. The presence of non-equilibrium QPs in superconducting resonators and qubits operating at millikelvin temperature has been known for decades. Understanding the sources and dynamics of these QPs is crucial to evaluate and improve the performance of the devices. Specifically, for superconducting qubits, a single QP tunneling across the Josephson junction changes the total charge parity from even to odd or vice versa, and can induce energy relaxation and dephasing, limiting the coherence of the device. To study the dynamics of non-equilibrium QPs, I utilized a Ramsey-like pulse sequence to measure the rate of single-electron parity changes in transmon qubits, which had a weak charge dispersion, with different shunting capacitor geometries and materials. I started out by measuring a charge parity rate of ~ 33 s-1 for a grounded "x-mon" qubit and ~ 17 s-1 for a galvanically isolated "two-pads" qubit with our standard setup. These rates decreased to ~ 5 s-1 and ~ 2 s-1 for the x-mon and two-pads respectively when IR-filters and extra layers of shielding were installed. From my measurements, I found that the charge parity rates are sensitive to the geometry of the shunting capacitor, weakly depend on the amount of shielding surrounding the device, and independent of using Al or Ta for the superconducting shunting capacitor. To distinguish between two possible mechanisms for the parity switching, I measured the parity rates after cooling one of the qubit devices in an external magnetic field to induce vortices in the superconducting electrodes. After increasing the magnetic field above 23 μT, I measured a faster QP trapping rate and a much smaller T1, suggesting that at least one vortex was added to the superconducting electrode near the Josephson junction. On the other hand, the measured charge parity rates exhibited no clear dependence on the background QP trapping rates. These data suggest that a large portion of parity switching events occurs from QPs being produced at the Josephson junction, where pair-breaking radiation is rectified into QPs by the junction, as opposed to tunneling of QPs residing in the electrodes. To understand the difference in the measured parity rates, I simulated the absorption efficiency of pair-breaking radiation for my two designs and observed a similar difference in absorption rates when a single-mode blackbody radiation with an effective temperature T* ~ 300 mK was assumed to be illuminating the devices. This large T*, which is significantly higher than the device's nominal temperature of 20 mK, is consistent with values reported in the literature. However, its physical origin remains not fully understood. For the other part of my dissertation, I developed a new simplified process for making superconducting air bridges. Air bridges are used to suppress unwanted extraneous high frequency chip modes parasitic to superconducting quantum circuits that can couple to qubits and cause decoherence. Traditional ways of making air bridges utilize thermal reflow to create arched photoresist scaffolds that are limited in heights. This results in insufficient mechanical strength of the bridges which tend to collapse when spanning to larger lengths. My simplified fabrication method that utilizes two-photon lithography, a technique that enables creation of three-dimensional micron-scale structures, relaxes this limitation and is capable of making mechanically stable bridges with lengths up to 100 μm. The resulting Al air bridges, having a superconducting transition temperature of Tc = 1.08 mK and a dc residual resistivity ratio of 3.85, were confirmed to form a good electrical contact with the base metal layers and exhibit a small measurable amount of rf loss when placed over coplanar waveguide resonators, on par with other air bridge fabrication methods.
The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.
The coherence of superconducting transmon qubits is often disrupted by fluctuations in the energy relaxation time (T1), limiting their performance for quantum computing. While background magnetic fields can be harmful to superconducting devices, we demonstrate that both trapped magnetic flux and externally applied static magnetic fields can suppress temporal fluctuations in T1 without significantly degrading its average value or qubit frequency. Using a three-axis Helmholtz coil system, we applied calibrated magnetic fields perpendicular to the qubit plane during cooldown and operation. Remarkably, transmon qubits based on tantalum-capped niobium (Nb/Ta) capacitive pads and aluminum-based Josephson junctions (JJs) maintained T1 lifetimes near 300 μs even when cooled in fields as high as 600 mG. Both trapped flux up to 600 mG and applied fields up to 400 mG reduced T1 fluctuations by more than a factor of two, while higher field strengths caused rapid coherence degradation. We attribute this stabilization to the polarization of paramagnetic impurities, the role of trapped flux as a sink for non-equilibrium quasiparticles (QPs), and partial saturation of fluctuating two-level systems (TLSs). These findings challenge the conventional view that magnetic fields are inherently detrimental and introduce a strategy for mitigating noise in superconducting qubits, offering a practical path toward more stable and scalable quantum systems.
Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.
Abstract Non-equilibrium quasiparticles are possible sources for decoherence in superconducting qubits because they can lead to energy decay or dephasing upon tunneling across Josephson junctions (JJs). Here, we investigate the impact of the intrinsic properties of two-dimensional transmon qubits on quasiparticle tunneling (QPT) and discuss how we can use quasiparticle dynamics to gain critical information about the quality of JJ barrier. We find the tunneling rate of the non-equilibrium quasiparticles to be sensitive to the choice of the shunting capacitor material and their geometry in qubits. In some devices, we observe an anomalous temperature dependence of the QPT rate below 100 mK that deviates from a constant background associated with non-equilibrium quasiparticles. We speculate that this behavior is caused by high transmission sites/defects within the oxide barriers of the JJs, leading to spatially localized subgap states. We model this by assuming that such defects generate regions with a smaller effective gap. Our results present a unique in situ characterization tool to assess the uniformity of tunnel barriers in qubit junctions and shed light on how quasiparticles can interact with various elements of the qubit circuit.
Superconducting qubits can be sensitive to sudden energy deposits into the substrate from cosmic rays and ambient radioactivity. While previous studies have primarily focused on exploring correlated effects over time and distance due to cosmic rays, this study uniquely offers a direct comparison of a transmon qubit's response at Fermilab SQMS above-ground facilities and the deep-underground Gran Sasso Laboratory (INFN-LNGS, Italy). Despite the vastly different radiation environments, we observe a similar average qubit lifetime (T1) of approximately 80 microseconds at both sites. We then employ a fast decay detection protocol and investigate the time structure, sensitivity, and relative rates of triggered events due to radiation versus intrinsic noise. We compare the above and underground performance of several high-coherence qubits with similar designs. Our findings reveal no significant difference in events with radiation-like signatures between above-ground and underground conditions for these sapphire and niobium-based transmon qubits. This suggests that most such events are likely due to other noise sources, which predominantly contribute to single-qubit errors in contemporary transmon qubits. By exposing the qubits to gamma sources with varying activity levels, we further evaluate their response to radiation in a low-background environment. The results show that qubits can indeed detect particle impacts; however, this capability is only realized by substantially reducing other noise sources, which in turn affects detection efficiency [1].