Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2105.10249 · APL Photonics

A cavity-based optical antenna for color centers in diamond

Philipp Fuchs, Thomas Jung, Michael Kieschnick, Jan Meijer, Christoph Becher

Published Aug 1, 2021• 20 citations
arXivHTMLPDF

Abstract

An efficient atom–photon interface is a key requirement for the integration of solid-state emitters, such as color centers in diamond, into quantum technology applications. As other solid-state emitters, however, their emission into free space is severely limited due to the high refractive index of the bulk host crystal. In this work, we present a planar optical antenna based on two silver mirrors coated on a thin single crystal diamond membrane, forming a planar Fabry–Pérot cavity that improves the photon extraction from single tin vacancy (SnV) centers and their coupling to an excitation laser. Upon numerical optimization of the structure, we find theoretical enhancements in the collectible photon rate by a factor of 60 as compared to the bulk case. As a proof-of-principle demonstration, we fabricate single crystal diamond membranes with sub-μm thickness and create SnV centers by ion implantation. Employing off-resonant excitation, we show a sixfold enhancement of the collectible photon rate, yielding up to half a million photons per second from a single SnV center. At the same time, we observe a significant reduction of the required excitation power in accordance with theory, demonstrating the functionality of the cavity as an optical antenna. Due to its planar design, the antenna simultaneously provides similar enhancements for a large number of emitters inside the membrane. Furthermore, the monolithic structure provides high mechanical stability and straightforwardly enables operation under cryogenic conditions as required in most spin–photon interface implementations.

DOI
10.1063/5.0057161

Related papers

Optical interfacing of tin-vacancy spin qubits in diamond

Philipp Fuchs, Johannes Görlitz, Robert Morsch-Golsong +2 more

Color centers in diamond, specifically the group-IV-vacancy centers, have emerged as promising candidates among solid state qubits. Among these, the tin-vacancy (SnV) center features the optimum combination of long spin coherence time and favorable optical properties. We here investigate the generation of indistinguishable single photons from SnV centers and explore the influence of residual spectral diffusion. To improve the photon collection efficiency we fabricate a planar optical antenna based on two silver mirrors coated on a thin (sub-µm) single crystal diamond membrane. We demonstrate its operation at room and cryogenic temperatures and strong enhancement of the collectible photon rate.

Photonic and Phononic Properties of Engineered Nanostructures•Mar 4, 2022•0 citations

Coupling of a single tin-vacancy center to a photonic crystal cavity in diamond

Kazuhiro Kuruma, Benjamin Pingault, Cleaven Chia +5 more

We demonstrate optical coupling between a single tin-vacancy (SnV) center in diamond and a free-standing photonic crystal nanobeam cavity. The cavities are fabricated using quasi-isotropic etching and feature experimentally measured quality factors as high as ∼11 000. We investigate the dependence of a single SnV center's emission by controlling the cavity wavelength using a laser-induced gas desorption technique. Under resonance conditions, we observe an intensity enhancement of the SnV emission by a factor of 12 and a 16-fold reduction of the SnV lifetime. Based on the large enhancement of the SnV emission rate inside the cavity, we estimate the Purcell factor for the SnV zero-phonon line to be 37 and the coupling efficiency of the SnV center to the cavity, the β factor, to be 95%. Our work paves the way for the realization of quantum photonic devices and systems based on efficient photonic interfaces using the SnV color center in diamond.

arXiv:2105.01715•Applied Physics Letters•Jun 7, 2021•78 citations

High-cooperativity coupling and spin-resolved extinction of tin-vacancy centers in a diamond-like microcavity

Kerim Köster, András Laukó, Federico Rapisarda +16 more

The tin-vacancy (SnV) center in diamond is a promising spin-photon interface for quantum networks, combining favorable optical properties with spin coherence above 1K. Unfolding the full potential requires cavity enhancement to increase photon-emitter coupling efficiency. Here, we demonstrate cavity-enhanced light-matter coupling of SnV centers in a fully tunable Fabry-Pérot microcavity operating at temperatures down to 1K with in-situ magnetic field control. We access the diamond-like regime of hybrid cavity modes through integration of low-roughness diamond membranes, where the field is concentrated inside the diamond and Purcell enhancement is maximized. Diamond-like modes deliver a more than two-fold increase in the effective Purcell factor over air-like modes, reaching $C_0 = 4.1(1)$ compared to $C_0 = 1.85(5)$ in the air-like case, while simultaneously relaxing mechanical stability requirements. Resonant probing reveals coherent cavity-emitter coupling with 96% extinction contrast and a coherent cooperativity of $C = 4.0(14)$. By applying a magnetic field, we further achieve spin-resolved cavity extinction, observing spin-selective optical transitions with a contrast of ${\cal C}_{\rm spin} = 0.91$. These results establish SnV centers in diamond coupled to open Fabry-Pérot microcavities as a promising platform for efficient spin-photon interfaces.

quant-pharXiv:2608.04797•Aug 6, 2026•0 citations

Engineering of the photonic environment of single nitrogen-vacancy centers in diamond

Daniel Riedel

The nitrogen-vacancy (NV) center in diamond has an optically addressable, highly coherent spin. However, an NV center even in high quality single-crystalline material is a very poor source of single photons: extraction out of the high-index diamond is inefficient, the emission of coherent photons represents just a few per cent of the total emission, and the decay time is large. In principle, all three problems can be addressed with a resonant microcavity, which significantly boosts the emission rate of coherent photons into the cavity mode based on the Purcell effect. In practice though, it has proved difficult to implement this concept: photonic engineering hinges on nano-fabrication yet it is notoriously difficult to process diamond without degrading the NV centers. \nIn this thesis, we present a microcavity scheme which employs minimally processed diamond membranes, thereby preserving the high quality of the starting material. The miniaturized plano-concave Fabry-Perot microcavity platform features full in situ spatial and spectral tunability. We demonstrate a clear change in the lifetime for multiple individual NV centers on tuning both the cavity frequency and anti-node position. The overall Purcell factor for the zero-phonon line (ZPL) of ~30 translates to an increase in the ZPL emission probability from ~3% to ~46%. \nFurthermore, we report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid state. The device, the first crystalline solid-state realization of a dielectric antenna, is engineered for individual NV electronic spins in diamond. The photonic structure preserves the high spin coherence of single-crystalline diamond (T2 ~100µs). We demonstrate a directionality of close to 10 and single photon count rates approaching one MHz. The analysis of the angular emission pattern of our device suggests that 95% of the broadband NV fluorescence is channeled into a solid angle corresponding to a numerical aperture of 0.8. \nThe abovementioned approaches feature complementary benefits. The narrowband enhancement of the ZPL emission rate provided by the microcavity benefits applications in quantum information processing relying on coherent photons. With the prospect of integrating lifetime-limited emitters and achieving a high ZPL collection efficiency our results pave the way for much enhanced spin-photon and spin-spin entanglement rates. On the other hand, by channeling the major fraction of the broadband NV fluorescence into a narrow solid angle the dielectric optical antenna facilitates efficient spin readout. Our approach enables a near-unity collection efficiency which, upon mitigation of the known photon losses, renders it a potential key technology for quantum sensing applications. \n

•Jan 1, 2017•2 citations

A nanophotonic interface for tin-vacancy spin qubits in diamond

Shahriar Aghaeimeibodi, Alison E. Rugar, Daniel Riedel +8 more

Building quantum networks requires efficient coupling of solid-state quantum emitters to photonic devices. Tinvacancy center (SnV) has attracted much interest for having long spin coherence times at temperatures above 1 K. Employing SnV as an optically addressable qubit requires integration with photonic structures to both route the emitted photons and enhance the light-matter interaction. We present incorporation of high-quality SnV centers with narrow linewidths in suspended diamond waveguides. Furthermore, we fabricate photonic crystal cavities in diamond with embedded SnV centers. We observe strong intensity enhancement of the photon emission when the cavity is resonant with the color center. Time-resolved photoluminescence measurements confirm that this effect is due to radiative Purcell enhancement of the spontaneous emission. Finally, we demonstrate Stark tuning of transition frequency of SnV centers, essential for multiemitter applications. These results are a significant step toward color-center-based quantum information processing applications without the need for dilution refrigerators.

Quantum Nanophotonic Materials, Devices, and Systems•Jul 30, 2021•1 citation

Controlled coupling of single color centers to a photonic crystal cavity in monocrystalline diamond

Janine Riedrich‐Möller, Sébastien Pezzagna, Jan Meijer +4 more

Summary form only given. Deterministic coupling of a single emitter to a photonic crystal cavity is an important step towards the realization of integrated solid-state devices for quantum photonics. As single emitters, color centers in diamond, e.g. the Nitrogen-Vacancy (NV) center or the Silicon-Vacancy (SiV) center have attracted significant interest due to their extraordinary properties like long spin-coherence times or narrowband and bright single photon emission, respectively. For the realization of recent proposals like cavity-enhanced spin measurements or cavity-enhanced single photon sources, it is necessary to couple single color centers to a cavity with small mode volume and high quality factor. Photonic crystal cavities directly fabricated within a monocrystalline diamond membrane are well suited for this task, as they offer tiny mode volumes for efficient emitter-cavity coupling as well as scalable architectures for integrated photonic devices.In order to achieve controlled coupling of a color center to a photonic crystal cavity, several challenges have to be tackled, e.g. exact emitter positioning and alignment of its dipole moment with the cavity electric field as well as the ability for cavity tuning. For deterministic emitter-cavity positioning, two different routes can be pursued: In the first approach, a single emitter is localized within the diamond, its dipole orientation is determined and the cavity is subsequently structured around it. In the second approach, the cavity is fabricated first and a single color center is created within the cavity, e.g. via ion implantion or creation of vacancies. Here we present strategies to realize both methods for deterministic emitter-cavity coupling. For the first approach, we use a monocrystalline diamond film containing single SiV centers. Figure 1a) shows a fluorescence scan of a single SiV center with position markers next to it. The position markers are subsequently used to structure a photonic crystal cavity around the color center using focused ion beam milling [1]. Figures 1b) and c) show SEMimages before and after the cavity fabrication. The photonic crystal lattice constant a ≈ 283nm is chosen such that the cavity modes are red shifted with respect to the SiV emission lines. Using an oxidation tuning method, the cavity modes are tuned into resonance with the zero-phonon line at 740nm of a single SiV center (see Fig. 1d)). On resonance, we measure an intensity enhancement by a factor of 3.8 compared to the off-resonant case.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•1 citation
An efficient atom–photon interface is a key requirement for the integration of solid-state emitters, such as color centers in diamond, into quantum technology applications. As other solid-state emitters, however, their emission into free space is severely limited due to the high refractive index of the bulk host crystal. In this work, we present a planar optical antenna based on two silver mirrors coated on a thin single crystal diamond membrane, forming a planar Fabry–Pérot cavity that improves the photon extraction from single tin vacancy (SnV) centers and their coupling to an excitation laser. Upon numerical optimization of the structure, we find theoretical enhancements in the collectible photon rate by a factor of 60 as compared to the bulk case. As a proof-of-principle demonstration, we fabricate single crystal diamond membranes with sub-μm thickness and create SnV centers by ion implantation. Employing off-resonant excitation, we show a sixfold enhancement of the collectible photon rate, yielding up to half a million photons per second from a single SnV center. At the same time, we observe a significant reduction of the required excitation power in accordance with theory, demonstrating the functionality of the cavity as an optical antenna. Due to its planar design, the antenna simultaneously provides similar enhancements for a large number of emitters inside the membrane. Furthermore, the monolithic structure provides high mechanical stability and straightforwardly enables operation under cryogenic conditions as required in most spin–photon interface implementations.
Color centers in diamond, specifically the group-IV-vacancy centers, have emerged as promising candidates among solid state qubits. Among these, the tin-vacancy (SnV) center features the optimum combination of long spin coherence time and favorable optical properties. We here investigate the generation of indistinguishable single photons from SnV centers and explore the influence of residual spectral diffusion. To improve the photon collection efficiency we fabricate a planar optical antenna based on two silver mirrors coated on a thin (sub-µm) single crystal diamond membrane. We demonstrate its operation at room and cryogenic temperatures and strong enhancement of the collectible photon rate.
We demonstrate optical coupling between a single tin-vacancy (SnV) center in diamond and a free-standing photonic crystal nanobeam cavity. The cavities are fabricated using quasi-isotropic etching and feature experimentally measured quality factors as high as ∼11 000. We investigate the dependence of a single SnV center's emission by controlling the cavity wavelength using a laser-induced gas desorption technique. Under resonance conditions, we observe an intensity enhancement of the SnV emission by a factor of 12 and a 16-fold reduction of the SnV lifetime. Based on the large enhancement of the SnV emission rate inside the cavity, we estimate the Purcell factor for the SnV zero-phonon line to be 37 and the coupling efficiency of the SnV center to the cavity, the β factor, to be 95%. Our work paves the way for the realization of quantum photonic devices and systems based on efficient photonic interfaces using the SnV color center in diamond.
The tin-vacancy (SnV) center in diamond is a promising spin-photon interface for quantum networks, combining favorable optical properties with spin coherence above 1K. Unfolding the full potential requires cavity enhancement to increase photon-emitter coupling efficiency. Here, we demonstrate cavity-enhanced light-matter coupling of SnV centers in a fully tunable Fabry-Pérot microcavity operating at temperatures down to 1K with in-situ magnetic field control. We access the diamond-like regime of hybrid cavity modes through integration of low-roughness diamond membranes, where the field is concentrated inside the diamond and Purcell enhancement is maximized. Diamond-like modes deliver a more than two-fold increase in the effective Purcell factor over air-like modes, reaching C0=4.1(1)C_0 = 4.1(1)C0​=4.1(1) compared to C0=1.85(5)C_0 = 1.85(5)C0​=1.85(5) in the air-like case, while simultaneously relaxing mechanical stability requirements. Resonant probing reveals coherent cavity-emitter coupling with 96% extinction contrast and a coherent cooperativity of C=4.0(14)C = 4.0(14)C=4.0(14). By applying a magnetic field, we further achieve spin-resolved cavity extinction, observing spin-selective optical transitions with a contrast of Cspin=0.91{\cal C}_{\rm spin} = 0.91Cspin​=0.91. These results establish SnV centers in diamond coupled to open Fabry-Pérot microcavities as a promising platform for efficient spin-photon interfaces.
The nitrogen-vacancy (NV) center in diamond has an optically addressable, highly coherent spin. However, an NV center even in high quality single-crystalline material is a very poor source of single photons: extraction out of the high-index diamond is inefficient, the emission of coherent photons represents just a few per cent of the total emission, and the decay time is large. In principle, all three problems can be addressed with a resonant microcavity, which significantly boosts the emission rate of coherent photons into the cavity mode based on the Purcell effect. In practice though, it has proved difficult to implement this concept: photonic engineering hinges on nano-fabrication yet it is notoriously difficult to process diamond without degrading the NV centers. \nIn this thesis, we present a microcavity scheme which employs minimally processed diamond membranes, thereby preserving the high quality of the starting material. The miniaturized plano-concave Fabry-Perot microcavity platform features full in situ spatial and spectral tunability. We demonstrate a clear change in the lifetime for multiple individual NV centers on tuning both the cavity frequency and anti-node position. The overall Purcell factor for the zero-phonon line (ZPL) of ~30 translates to an increase in the ZPL emission probability from ~3% to ~46%. \nFurthermore, we report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid state. The device, the first crystalline solid-state realization of a dielectric antenna, is engineered for individual NV electronic spins in diamond. The photonic structure preserves the high spin coherence of single-crystalline diamond (T2 ~100µs). We demonstrate a directionality of close to 10 and single photon count rates approaching one MHz. The analysis of the angular emission pattern of our device suggests that 95% of the broadband NV fluorescence is channeled into a solid angle corresponding to a numerical aperture of 0.8. \nThe abovementioned approaches feature complementary benefits. The narrowband enhancement of the ZPL emission rate provided by the microcavity benefits applications in quantum information processing relying on coherent photons. With the prospect of integrating lifetime-limited emitters and achieving a high ZPL collection efficiency our results pave the way for much enhanced spin-photon and spin-spin entanglement rates. On the other hand, by channeling the major fraction of the broadband NV fluorescence into a narrow solid angle the dielectric optical antenna facilitates efficient spin readout. Our approach enables a near-unity collection efficiency which, upon mitigation of the known photon losses, renders it a potential key technology for quantum sensing applications. \n
Building quantum networks requires efficient coupling of solid-state quantum emitters to photonic devices. Tinvacancy center (SnV) has attracted much interest for having long spin coherence times at temperatures above 1 K. Employing SnV as an optically addressable qubit requires integration with photonic structures to both route the emitted photons and enhance the light-matter interaction. We present incorporation of high-quality SnV centers with narrow linewidths in suspended diamond waveguides. Furthermore, we fabricate photonic crystal cavities in diamond with embedded SnV centers. We observe strong intensity enhancement of the photon emission when the cavity is resonant with the color center. Time-resolved photoluminescence measurements confirm that this effect is due to radiative Purcell enhancement of the spontaneous emission. Finally, we demonstrate Stark tuning of transition frequency of SnV centers, essential for multiemitter applications. These results are a significant step toward color-center-based quantum information processing applications without the need for dilution refrigerators.
Summary form only given. Deterministic coupling of a single emitter to a photonic crystal cavity is an important step towards the realization of integrated solid-state devices for quantum photonics. As single emitters, color centers in diamond, e.g. the Nitrogen-Vacancy (NV) center or the Silicon-Vacancy (SiV) center have attracted significant interest due to their extraordinary properties like long spin-coherence times or narrowband and bright single photon emission, respectively. For the realization of recent proposals like cavity-enhanced spin measurements or cavity-enhanced single photon sources, it is necessary to couple single color centers to a cavity with small mode volume and high quality factor. Photonic crystal cavities directly fabricated within a monocrystalline diamond membrane are well suited for this task, as they offer tiny mode volumes for efficient emitter-cavity coupling as well as scalable architectures for integrated photonic devices.In order to achieve controlled coupling of a color center to a photonic crystal cavity, several challenges have to be tackled, e.g. exact emitter positioning and alignment of its dipole moment with the cavity electric field as well as the ability for cavity tuning. For deterministic emitter-cavity positioning, two different routes can be pursued: In the first approach, a single emitter is localized within the diamond, its dipole orientation is determined and the cavity is subsequently structured around it. In the second approach, the cavity is fabricated first and a single color center is created within the cavity, e.g. via ion implantion or creation of vacancies. Here we present strategies to realize both methods for deterministic emitter-cavity coupling. For the first approach, we use a monocrystalline diamond film containing single SiV centers. Figure 1a) shows a fluorescence scan of a single SiV center with position markers next to it. The position markers are subsequently used to structure a photonic crystal cavity around the color center using focused ion beam milling [1]. Figures 1b) and c) show SEMimages before and after the cavity fabrication. The photonic crystal lattice constant a ≈ 283nm is chosen such that the cavity modes are red shifted with respect to the SiV emission lines. Using an oxidation tuning method, the cavity modes are tuned into resonance with the zero-phonon line at 740nm of a single SiV center (see Fig. 1d)). On resonance, we measure an intensity enhancement by a factor of 3.8 compared to the off-resonant case.