Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2104.10221 · Physical Review A

Hardware-efficient random circuits to classify noise in a multiqubit system

Jin-Sung Kim, Lev S. Bishop, Antonio D. Corcoles, Seth Merkel, John A. Smolin, Sarah Sheldon

Published Aug 17, 2021• 7 citations
arXivHTMLPDF

Abstract

In this work, we extend a multiqubit benchmarking technique known as the binned output generation (BOG) in order to discriminate between coherent and incoherent noise sources in the multiqubit regime. While methods exist to discriminate coherent from incoherent noise at the single and few-qubit level, these methods scale poorly beyond a few qubits or must make assumptions about the form of the noise. On the other end of the spectrum, system-level benchmarking techniques exist, but they fail to discriminate between coherent and incoherent noise sources. We experimentally verify the BOG against randomized benchmarking (RB) (the industry standard benchmarking technique) in the two-qubit regime, then apply this technique to a six-qubit linear chain, a regime currently inaccessible to RB. In this experiment, we inject an instantaneous coherent $Z$-type noise on each qubit and demonstrate that the measured coherent noise scales correctly with the magnitude of the injected noise, while the measured incoherent noise remains unchanged as expected. This demonstrates a robust technique to measure coherent errors in a variety of hardware.

DOI
10.1103/physreva.104.022609

Related papers

Randomized benchmarking with synthetic quantum circuits

Yale Fan, Riley J. Murray, Thaddeus D. Ladd +2 more

Abstract Noise characterization methods such as randomized benchmarking (RB) are critical for the development of scalable quantum computers. Modern RB protocols for multiqubit systems extract physically relevant error rates by exploiting the structure of the group representation generated by the set of benchmarked operations. However, existing techniques become prohibitively inefficient for representations that are highly reducible yet decompose into irreducible subspaces of high dimension. These situations prevail when benchmarking high-dimensional systems such as qudits or bosonic modes, where experimental control is limited to implementing a small subset of all possible unitary operations. We introduce a broad framework for enhancing the sample efficiency of RB that is sufficiently powerful to extend the practical reach of RB beyond the multiqubit setting. Our strategy, which applies to any benchmarking group, uses ‘synthetic’ quantum circuits with classical post-processing of both input and output data to leverage the full structure of reducible superoperator representations. To demonstrate the efficacy of our approach, we develop a detailed theory of RB for systems with rotational symmetry. Such systems carry a natural action of the group SU ( 2 ) , and they form the basis for several novel quantum error-correcting codes. We show that, for experimentally accessible high-spin systems, synthetic RB protocols can reduce the complexity of measuring rotationally invariant error rates by two orders of magnitude relative to standard approaches such as character RB.

arXiv:2412.18578•Quantum Science and Technology•Jul 15, 2026•1 citation

Estimating the Coherence of Noise in Quantum Control of a Solid-State Qubit

Guanru Feng, Joel J. Wallman, Brandon Buonacorsi +6 more

To exploit a given physical system for quantum information processing, it is critical to understand the different types of noise affecting quantum control. Distinguishing coherent and incoherent errors is extremely useful as they can be reduced in different ways. Coherent errors are generally easier to reduce at the hardware level, e.g., by improving calibration, whereas some sources of incoherent errors, e.g., T_{2}^{*} processes, can be reduced by engineering robust pulses. In this work, we illustrate how purity benchmarking and randomized benchmarking can be used together to distinguish between coherent and incoherent errors and to quantify the reduction in both of them due to using optimal control pulses and accounting for the transfer function in an electron spin resonance system. We also prove that purity benchmarking provides bounds on the optimal fidelity and diamond norm that can be achieved by correcting the coherent errors through improving calibration.

arXiv:1603.03761•Physical Review Letters•Dec 20, 2016•44 citations

Three-Qubit Randomized Benchmarking

David C. McKay, Sarah Sheldon, John A. Smolin +2 more

As quantum circuits increase in size, it is critical to establish scalable multiqubit fidelity metrics. Here we investigate, for the first time, three-qubit randomized benchmarking (RB) on a quantum device consisting of three fixed-frequency transmon qubits with pairwise microwave-activated interactions (cross-resonance). We measure a three-qubit error per Clifford of 0.106 for all-to-all gate connectivity and 0.207 for linear gate connectivity. Furthermore, by introducing mixed dimensionality simultaneous RB-simultaneous one- and two-qubit RB-we show that the three-qubit errors can be predicted from the one- and two-qubit errors. However, by introducing certain coherent errors to the gates, we can increase the three-qubit error to 0.302, an increase that is not predicted by a proportionate increase in the one- and two-qubit errors from simultaneous RB. This demonstrates the importance of multiqubit metrics, such as three-qubit RB, on evaluating overall device performance.

arXiv:1712.06550•Physical Review Letters•May 23, 2019•155 citations

Characterization of coherent errors in gate layers with robustness to Pauli noise

Noah Kaufmann, Ivan Rojkov, Florentin Reiter

Characterization of quantum devices generates insights into their sources of disturbances. State-of-the-art characterization protocols often focus on incoherent noise and eliminate coherent errors when using Pauli or Clifford twirling techniques. This approach biases the structure of the effective noise and adds a circuit and sampling overhead. We motivate the extension of an incoherent local Pauli noise model to coherent errors and present a practical characterization protocol for an arbitrary gate layer. Notably, the coherent noise estimation is robust to Pauli noise. We demonstrate our protocol on a superconducting hardware platform and identify the leading coherent errors. To verify the characterized noise structure, we mitigate its coherent and incoherent components using a gate-level coherent noise mitigation scheme in conjunction with probabilistic error cancelation. The proposed characterization procedure opens up possibilities for device calibration, hardware development, and improvement of error mitigation and correction techniques.

arXiv:2307.08741•Physical Review Applied•Mar 7, 2025•5 citations

Estimating the coherence of noise

Joel J. Wallman, Christopher Granade, Robin Harper +1 more

Noise mechanisms in quantum systems can be broadly characterized as either coherent (i.e., unitary) or incoherent. For a given fixed average error rate, coherent noise mechanisms will generally lead to a larger worst-case error than incoherent noise. We show that the coherence of a noise source can be quantified by the unitarity , which we relate to the average change in purity averaged over input pure states. We then show that the unitarity can be efficiently estimated using a protocol based on randomized benchmarking that is efficient and robust to state-preparation and measurement errors. We also show that the unitarity provides a lower bound on the optimal achievable gate infidelity under a given noisy process.

arXiv:1503.07865•New Journal of Physics•Nov 6, 2015•195 citations

Sample-efficient benchmarking of shallow all-to-all random quantum circuits

Gregory Bentsen, Bill Fefferman, Soumik Ghosh +2 more

Random circuit sampling (RCS) remains one of the most competitive frameworks for demonstrating quantum advantage in near-term noisy intermediate-scale quantum (NISQ) hardware. Unfortunately, absent error-correction, existing benchmarks to characterize these experiments, like linear cross-entropy, have been classically spoofed due to noise. Because of this, there are interesting regimes, like shallow-depth random quantum circuits, where sampling is plausibly classically intractable, but no existing benchmark can distinguish between a noisy quantum computer and an adversarial classical spoofer. In this paper, we demonstrate that the nonlinear cross-entropy provides a sample-efficient benchmark for shallow-depth all-to-all random quantum circuits whose score cleanly separates noisy quantum computers from state-of-the-art classical spoofers, even in the presence of depolarizing noise. Further, we develop a binary classifier based on the notion of heavy output generation that features logarithmic sample complexity at short depth. Our evidence comes from exact analytic expressions for all-to-all Brownian circuit ensembles derived using replica tricks, and numerical simulations that corroborate these results for discrete Haar-random unitary circuits.

quant-pharXiv:2605.22909•May 25, 2026•0 citations
In this work, we extend a multiqubit benchmarking technique known as the binned output generation (BOG) in order to discriminate between coherent and incoherent noise sources in the multiqubit regime. While methods exist to discriminate coherent from incoherent noise at the single and few-qubit level, these methods scale poorly beyond a few qubits or must make assumptions about the form of the noise. On the other end of the spectrum, system-level benchmarking techniques exist, but they fail to discriminate between coherent and incoherent noise sources. We experimentally verify the BOG against randomized benchmarking (RB) (the industry standard benchmarking technique) in the two-qubit regime, then apply this technique to a six-qubit linear chain, a regime currently inaccessible to RB. In this experiment, we inject an instantaneous coherent ZZZ-type noise on each qubit and demonstrate that the measured coherent noise scales correctly with the magnitude of the injected noise, while the measured incoherent noise remains unchanged as expected. This demonstrates a robust technique to measure coherent errors in a variety of hardware.
Abstract Noise characterization methods such as randomized benchmarking (RB) are critical for the development of scalable quantum computers. Modern RB protocols for multiqubit systems extract physically relevant error rates by exploiting the structure of the group representation generated by the set of benchmarked operations. However, existing techniques become prohibitively inefficient for representations that are highly reducible yet decompose into irreducible subspaces of high dimension. These situations prevail when benchmarking high-dimensional systems such as qudits or bosonic modes, where experimental control is limited to implementing a small subset of all possible unitary operations. We introduce a broad framework for enhancing the sample efficiency of RB that is sufficiently powerful to extend the practical reach of RB beyond the multiqubit setting. Our strategy, which applies to any benchmarking group, uses ‘synthetic’ quantum circuits with classical post-processing of both input and output data to leverage the full structure of reducible superoperator representations. To demonstrate the efficacy of our approach, we develop a detailed theory of RB for systems with rotational symmetry. Such systems carry a natural action of the group SU ( 2 ) , and they form the basis for several novel quantum error-correcting codes. We show that, for experimentally accessible high-spin systems, synthetic RB protocols can reduce the complexity of measuring rotationally invariant error rates by two orders of magnitude relative to standard approaches such as character RB.
To exploit a given physical system for quantum information processing, it is critical to understand the different types of noise affecting quantum control. Distinguishing coherent and incoherent errors is extremely useful as they can be reduced in different ways. Coherent errors are generally easier to reduce at the hardware level, e.g., by improving calibration, whereas some sources of incoherent errors, e.g., T_{2}^{*} processes, can be reduced by engineering robust pulses. In this work, we illustrate how purity benchmarking and randomized benchmarking can be used together to distinguish between coherent and incoherent errors and to quantify the reduction in both of them due to using optimal control pulses and accounting for the transfer function in an electron spin resonance system. We also prove that purity benchmarking provides bounds on the optimal fidelity and diamond norm that can be achieved by correcting the coherent errors through improving calibration.
As quantum circuits increase in size, it is critical to establish scalable multiqubit fidelity metrics. Here we investigate, for the first time, three-qubit randomized benchmarking (RB) on a quantum device consisting of three fixed-frequency transmon qubits with pairwise microwave-activated interactions (cross-resonance). We measure a three-qubit error per Clifford of 0.106 for all-to-all gate connectivity and 0.207 for linear gate connectivity. Furthermore, by introducing mixed dimensionality simultaneous RB-simultaneous one- and two-qubit RB-we show that the three-qubit errors can be predicted from the one- and two-qubit errors. However, by introducing certain coherent errors to the gates, we can increase the three-qubit error to 0.302, an increase that is not predicted by a proportionate increase in the one- and two-qubit errors from simultaneous RB. This demonstrates the importance of multiqubit metrics, such as three-qubit RB, on evaluating overall device performance.
Characterization of quantum devices generates insights into their sources of disturbances. State-of-the-art characterization protocols often focus on incoherent noise and eliminate coherent errors when using Pauli or Clifford twirling techniques. This approach biases the structure of the effective noise and adds a circuit and sampling overhead. We motivate the extension of an incoherent local Pauli noise model to coherent errors and present a practical characterization protocol for an arbitrary gate layer. Notably, the coherent noise estimation is robust to Pauli noise. We demonstrate our protocol on a superconducting hardware platform and identify the leading coherent errors. To verify the characterized noise structure, we mitigate its coherent and incoherent components using a gate-level coherent noise mitigation scheme in conjunction with probabilistic error cancelation. The proposed characterization procedure opens up possibilities for device calibration, hardware development, and improvement of error mitigation and correction techniques.
Noise mechanisms in quantum systems can be broadly characterized as either coherent (i.e., unitary) or incoherent. For a given fixed average error rate, coherent noise mechanisms will generally lead to a larger worst-case error than incoherent noise. We show that the coherence of a noise source can be quantified by the unitarity , which we relate to the average change in purity averaged over input pure states. We then show that the unitarity can be efficiently estimated using a protocol based on randomized benchmarking that is efficient and robust to state-preparation and measurement errors. We also show that the unitarity provides a lower bound on the optimal achievable gate infidelity under a given noisy process.
Random circuit sampling (RCS) remains one of the most competitive frameworks for demonstrating quantum advantage in near-term noisy intermediate-scale quantum (NISQ) hardware. Unfortunately, absent error-correction, existing benchmarks to characterize these experiments, like linear cross-entropy, have been classically spoofed due to noise. Because of this, there are interesting regimes, like shallow-depth random quantum circuits, where sampling is plausibly classically intractable, but no existing benchmark can distinguish between a noisy quantum computer and an adversarial classical spoofer. In this paper, we demonstrate that the nonlinear cross-entropy provides a sample-efficient benchmark for shallow-depth all-to-all random quantum circuits whose score cleanly separates noisy quantum computers from state-of-the-art classical spoofers, even in the presence of depolarizing noise. Further, we develop a binary classifier based on the notion of heavy output generation that features logarithmic sample complexity at short depth. Our evidence comes from exact analytic expressions for all-to-all Brownian circuit ensembles derived using replica tricks, and numerical simulations that corroborate these results for discrete Haar-random unitary circuits.