Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.05978

Design, fabrication and characterisation of a micro-fabricated double-junction segmented ion trap

Chiara Decaroli, Roland Matt, R. Oswald, Maryse Ernzer, Jeremy Flannery, Simon Ragg, Jonathan Home

Published Mar 10, 2021• 1 citation
arXivHTMLPDF

Abstract

We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for 2-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations and design choices. We give results of initial testing of the trap, including measurements of heating rates and junction transport.

DOI
10.48550/arxiv.2103.05978

Related papers

Design, fabrication and characterization of a micro-fabricated stacked-wafer segmented ion trap with two X-junctions

Chiara Decaroli, Roland Matt, R. Oswald +5 more

Abstract We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for two-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations and design choices. We give results of initial testing of the trap, including measurements of heating rates and junction transport.

Quantum Science and Technology•Jun 3, 2021•22 citations

A monolithic segmented 3D ion trap fabricated from fused silica by selective laser-induced etching

Edgar Brucke, Martin Wagener, Moritz Fontboté-Schmidt +10 more

We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 $^{40}$Ca$^+$ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.

physics.atom-phCross-listedarXiv:2609.01694•Sep 2, 2026•0 citations

Segmented ion-trap fabrication using high precision stacked wafers

Simon Ragg, Chiara Decaroli, Thomas Lutz +1 more

We describe the use of laser-enhanced etching of fused silica in order to build multilayer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this possibility, we describe traps for realizing two key elements of scaling trapped ion systems. The first is a trap for a cavity-QED interface between single ions and photons, in which the fabrication allows shapes that provide good electrostatic shielding of the ion from charge buildup on the mirror surfaces. The second incorporates two X-junctions allowing two-dimensional shuttling of ions. Here, we are able to investigate designs which explore a trade-off between pseudopotential barriers and confinement at the junction center. In both cases, we illustrate the design constraints arising from the fabrication.

arXiv:1907.05329•Review of Scientific Instruments•Oct 1, 2019•25 citations

A versatile laser-machined rf trap for arrays of 100+ ions

Frank G. Schroer, Ilyoung Jung, Thomas W. Burkle +4 more

Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.

quant-pharXiv:2607.13342•Jul 16, 2026•0 citations

Segmented ion-trap fabrication using high precision stacked wafers

Simon Ragg, Chiara Decaroli, Thomas A. Lutz +1 more

We describe the use of laser-enhanced etching of fused silica in order to build multilayer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this possibility, we describe traps for realizing two key elements of scaling trapped ion systems. The first is a trap for a cavity-QED interface between single ions and photons, in which the fabrication allows shapes that provide good electrostatic shielding of the ion from charge buildup on the mirror surfaces. The second incorporates two X-junctions allowing two-dimensional shuttling of ions. Here, we are able to investigate designs which explore a trade-off between pseudopotential barriers and confinement at the junction center. In both cases, we illustrate the design constraints arising from the fabrication.

•Oct 1, 2019•21 citations

Reliable transport through a microfabricated X -junction surface-electrode ion trap

Kenneth Wright, Jason Amini, Daniel L. Faircloth +9 more

We report the design, fabrication and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a 90° cross. The trap is fabricated with very large scalable integration techniques which are compatible with scaling to a large quantum information processor. The shape of the radio-frequency electrodes is optimized with a genetic algorithm to reduce axial pseudopotential barriers and minimize ion heating during transport. Seventy-eight independent dc control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs and determine the rate of ion loss due to transport. Doppler-cooled ions survive more than 10 5 round-trip transits between junction legs without loss and more than 65 consecutive round trips without laser cooling.

arXiv:1210.3655•New Journal of Physics•Mar 4, 2013•87 citations
We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for 2-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations and design choices. We give results of initial testing of the trap, including measurements of heating rates and junction transport.
Abstract We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for two-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations and design choices. We give results of initial testing of the trap, including measurements of heating rates and junction transport.
We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 40^{40}40Ca+^++ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.
We describe the use of laser-enhanced etching of fused silica in order to build multilayer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this possibility, we describe traps for realizing two key elements of scaling trapped ion systems. The first is a trap for a cavity-QED interface between single ions and photons, in which the fabrication allows shapes that provide good electrostatic shielding of the ion from charge buildup on the mirror surfaces. The second incorporates two X-junctions allowing two-dimensional shuttling of ions. Here, we are able to investigate designs which explore a trade-off between pseudopotential barriers and confinement at the junction center. In both cases, we illustrate the design constraints arising from the fabrication.
Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.
We describe the use of laser-enhanced etching of fused silica in order to build multilayer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this possibility, we describe traps for realizing two key elements of scaling trapped ion systems. The first is a trap for a cavity-QED interface between single ions and photons, in which the fabrication allows shapes that provide good electrostatic shielding of the ion from charge buildup on the mirror surfaces. The second incorporates two X-junctions allowing two-dimensional shuttling of ions. Here, we are able to investigate designs which explore a trade-off between pseudopotential barriers and confinement at the junction center. In both cases, we illustrate the design constraints arising from the fabrication.
We report the design, fabrication and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a 90° cross. The trap is fabricated with very large scalable integration techniques which are compatible with scaling to a large quantum information processor. The shape of the radio-frequency electrodes is optimized with a genetic algorithm to reduce axial pseudopotential barriers and minimize ion heating during transport. Seventy-eight independent dc control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs and determine the rate of ion loss due to transport. Doppler-cooled ions survive more than 10 5 round-trip transits between junction legs without loss and more than 65 consecutive round trips without laser cooling.