Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2011.08987 · Physical Review X

Characterization and Tomography of a Hidden Qubit

Marek Pechal, Gian Salis, Marc Ganzhorn, Daniel J. Egger, M. Werninghaus, Stefan Filipp

Published Nov 15, 2021• 9 citations
arXivHTMLPDF

Abstract

In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.

DOI
10.1103/physrevx.11.041032

Related papers

Characterization of a Two-Transmon Processor with Individual Single-Shot Qubit Readout

Andreas Dewes, Florian R. Ong, Vivien Schmitt +5 more

We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.

arXiv:1109.6735•Physical Review Letters•Feb 2, 2012•125 citations

Characterization of tunable coupler without a dedicated readout resonator in superconducting circuits

Chi Zhang, Tian-Le Wang, Liang-Liang Guo +6 more

Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.

Applied Physics Letters•Jan 9, 2023•11 citations

Characterization and optimization of tunable couplers via adiabatic control in superconducting circuits

Xuan Zhang, Xu Zhang, C. H. Chen +6 more

In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.

arXiv:2501.13646•Physical Review Applied•Aug 6, 2025•3 citations

Experimental demonstration of a high-fidelity virtual two-qubit gate

Akhil Pratap Singh, Kosuke Mitarai, Yasunari Suzuki +4 more

We experimentally demonstrate a virtual two-qubit gate and characterize it using quantum process tomography (QPT). The virtual two-qubit gate decomposes an actual two-qubit gate into single-qubit unitary gates and projection gates in quantum circuits for expectation-value estimation. We implement projection gates via midcircuit measurements. The deterministic sampling scheme reduces the number of experimental circuit evaluations required for decomposing a virtual two-qubit gate. We also apply quantum error mitigation to suppress the effect of measurement errors and improve the average gate fidelity of a virtual controlled- Z (CZ) gate to fav=0.9938±0.0002 . Our results highlight a practical approach to implement virtual two-qubit gates with high fidelities, which are useful for simulating quantum circuits using fewer qubits and implementing two-qubit gates on a distant pair of qubits. Published by the American Physical Society 2024

arXiv:2307.03232•Physical Review Research•Mar 4, 2024•11 citations

Control for Programmable Superconducting Quantum Systems

Michiel Adriaan Rol

The discovery of quantum mechanics in the 20th century forms the basis of many of the technologies that define our lives today. The ability to engineer and manipulate individual quantum systems -- even create artificial atoms -- promises a similar revolutionary leap in technology. A quantum technology of particular interest is quantum computing, which has the potential to solve problems that are intractable for classical computers, opening up new domains of computation. Meanwhile, an attractive approach to creating engineered quantum systems is circuit quantum electrodynamics (cQED). Where research initially focused on understanding the physics of cQED devices, focus has shifted to building systems capable of performing useful computations. However, this remains extremely challenging, in part due to the inherently fragile nature of the individual quantum bits, but also due to difficulties in controlling and scaling up these systems. This thesis focuses on the control aspects of building an extensible full-stack quantum computer based on superconducting transmon qubits. We define the demonstration of quantum fault-tolerance as our target application to give focus to our efforts. The QuSurf architecture for a full-stack quantum computer presented in this thesis is designed with this application in mind. We provide a detailed study of the error sources present in this system and give an overview of the relevant characterization techniques. In the second part of this thesis, we address several key challenges in the control of a quantum computer. To realize high-fidelity coherence limited gates, we present a novel tuneup protocol that achieves a tenfold speedup over the state-of-the-art. This is realized by eliminating the need for qubit initialization. We demonstrate this protocol by calibrating single-qubit gates to a coherence limited Clifford fidelity of 99.9% in one minute. Performing repeated parity checks, as is required for quantum error correction, requires reusing qubits quickly after they have been measured. By introducing a numerically optimized depletion pulse we are able to speeds up the depletion of measurement photons in a readout resonator without having to rely on specific symmetry conditions. Using this technique speed up photon depletion by more than six inverse resonator linewidths, reducing the error rate in an emulated ancilla parity check by a factor 75. Flux-pulsing based two-qubit gates are the fastest two-qubit gates. However, they are also very technically demanding. The key challenge in performing these gates is addressing the distortions that control signals experience as they traverse various electrical components. We have developed Cryoscope (short for cryogenic oscilloscope) to characterize and correct these distortions. Cryoscope is an in-situ technique that uses the qubit to sample control pulses of arbitrary shape. Even when correcting distortions to within $\\sim 0.1\\%$ two-qubit gates are history-dependent due to the long timescale upon which some of these distortions act. We have invented Net-Zero, a new type of flux-pulsing based two-qubit gate, to address this problem. It makes use of a symmetry condition of the transmon to have net-zero integral, making the gate resilient to long-timescale distortions. The gate suppresses leakage out of the computational subspace to 0.1% by making use of leakage interference and has a built-in echo effect that enhances the coherence of the gate, achieving a two-qubit gate fidelity of 99.1%. Custom software is required to perform the physics experiments needed to build and operate a quantum computer. PycQED is an open-source software framework we have developed for this purpose. We discuss the design choices and concepts of PycQED before turning our focus to characterization and calibration. Here we introduced dependency graphs as a useful abstraction and system emulation as an essential development tool for automating the characterization and calibration process. We conclude the thesis by reflecting on the limitations of our architecture and providing an outlook on the grand challenges of building a useful kilo-qubit sized quantum computer. We define these challenges as The Application Problem, The Fabrication Problem, and The Calibration Problem.

•Sep 23, 2020•3 citations

Benchmarking the noise sensitivity of different parametric two-qubit gates in a single superconducting quantum computing platform

Marc Ganzhorn, Gian Salis, Daniel J. Egger +8 more

The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms.A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity.Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven tunable coupler that mediates the interaction between two superconducting qubits.Using randomized benchmarking protocols we estimate an error per gate of 0.9 ± 0.03 and 1.3 ± 0.4% for the CZ and the iSWAP gate, respectively.We argue that spurious ZZ-type couplings are the dominant error source for the iSWAP gate, and that phase stability of all microwave drives is of utmost importance.Such differences in the achievable fidelities for different two-qubit gates have to be taken into account when mapping quantum algorithms to real hardware.

arXiv:2005.05696•Physical Review Research•Sep 18, 2020•78 citations
In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.
We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.
Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.
We experimentally demonstrate a virtual two-qubit gate and characterize it using quantum process tomography (QPT). The virtual two-qubit gate decomposes an actual two-qubit gate into single-qubit unitary gates and projection gates in quantum circuits for expectation-value estimation. We implement projection gates via midcircuit measurements. The deterministic sampling scheme reduces the number of experimental circuit evaluations required for decomposing a virtual two-qubit gate. We also apply quantum error mitigation to suppress the effect of measurement errors and improve the average gate fidelity of a virtual controlled- Z (CZ) gate to fav=0.9938±0.0002 . Our results highlight a practical approach to implement virtual two-qubit gates with high fidelities, which are useful for simulating quantum circuits using fewer qubits and implementing two-qubit gates on a distant pair of qubits. Published by the American Physical Society 2024
The discovery of quantum mechanics in the 20th century forms the basis of many of the technologies that define our lives today. The ability to engineer and manipulate individual quantum systems -- even create artificial atoms -- promises a similar revolutionary leap in technology. A quantum technology of particular interest is quantum computing, which has the potential to solve problems that are intractable for classical computers, opening up new domains of computation. Meanwhile, an attractive approach to creating engineered quantum systems is circuit quantum electrodynamics (cQED). Where research initially focused on understanding the physics of cQED devices, focus has shifted to building systems capable of performing useful computations. However, this remains extremely challenging, in part due to the inherently fragile nature of the individual quantum bits, but also due to difficulties in controlling and scaling up these systems. This thesis focuses on the control aspects of building an extensible full-stack quantum computer based on superconducting transmon qubits. We define the demonstration of quantum fault-tolerance as our target application to give focus to our efforts. The QuSurf architecture for a full-stack quantum computer presented in this thesis is designed with this application in mind. We provide a detailed study of the error sources present in this system and give an overview of the relevant characterization techniques. In the second part of this thesis, we address several key challenges in the control of a quantum computer. To realize high-fidelity coherence limited gates, we present a novel tuneup protocol that achieves a tenfold speedup over the state-of-the-art. This is realized by eliminating the need for qubit initialization. We demonstrate this protocol by calibrating single-qubit gates to a coherence limited Clifford fidelity of 99.9% in one minute. Performing repeated parity checks, as is required for quantum error correction, requires reusing qubits quickly after they have been measured. By introducing a numerically optimized depletion pulse we are able to speeds up the depletion of measurement photons in a readout resonator without having to rely on specific symmetry conditions. Using this technique speed up photon depletion by more than six inverse resonator linewidths, reducing the error rate in an emulated ancilla parity check by a factor 75. Flux-pulsing based two-qubit gates are the fastest two-qubit gates. However, they are also very technically demanding. The key challenge in performing these gates is addressing the distortions that control signals experience as they traverse various electrical components. We have developed Cryoscope (short for cryogenic oscilloscope) to characterize and correct these distortions. Cryoscope is an in-situ technique that uses the qubit to sample control pulses of arbitrary shape. Even when correcting distortions to within sim0.1\\sim 0.1\\%sim0.1 two-qubit gates are history-dependent due to the long timescale upon which some of these distortions act. We have invented Net-Zero, a new type of flux-pulsing based two-qubit gate, to address this problem. It makes use of a symmetry condition of the transmon to have net-zero integral, making the gate resilient to long-timescale distortions. The gate suppresses leakage out of the computational subspace to 0.1% by making use of leakage interference and has a built-in echo effect that enhances the coherence of the gate, achieving a two-qubit gate fidelity of 99.1%. Custom software is required to perform the physics experiments needed to build and operate a quantum computer. PycQED is an open-source software framework we have developed for this purpose. We discuss the design choices and concepts of PycQED before turning our focus to characterization and calibration. Here we introduced dependency graphs as a useful abstraction and system emulation as an essential development tool for automating the characterization and calibration process. We conclude the thesis by reflecting on the limitations of our architecture and providing an outlook on the grand challenges of building a useful kilo-qubit sized quantum computer. We define these challenges as The Application Problem, The Fabrication Problem, and The Calibration Problem.
The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms.A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity.Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven tunable coupler that mediates the interaction between two superconducting qubits.Using randomized benchmarking protocols we estimate an error per gate of 0.9 ± 0.03 and 1.3 ± 0.4% for the CZ and the iSWAP gate, respectively.We argue that spurious ZZ-type couplings are the dominant error source for the iSWAP gate, and that phase stability of all microwave drives is of utmost importance.Such differences in the achievable fidelities for different two-qubit gates have to be taken into account when mapping quantum algorithms to real hardware.