Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1109.6735 · Physical Review Letters

Characterization of a Two-Transmon Processor with Individual Single-Shot Qubit Readout

Andreas Dewes, Florian R. Ong, Vivien Schmitt, Romain Lauro, Nicolas Boulant, Patrice Bertet, D. Vion, D. Esteve

Published Feb 2, 2012• 125 citations
arXivHTMLPDF

Abstract

We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.

DOI
10.1103/physrevlett.108.057002

Related papers

Characterization and Tomography of a Hidden Qubit

Marek Pechal, Gian Salis, Marc Ganzhorn +3 more

In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.

arXiv:2011.08987•Physical Review X•Nov 15, 2021•9 citations

Benchmarking the quality of multiplexed qubit readout beyond assignment fidelity

Andras Di Giovanni, Adrian Skasberg Aasen, Jürgen Lisenfeld +3 more

The accurate measurement of quantum two-level objects (qubits) is crucial for developing quantum computers. Over the last decade, the measure of choice for benchmarking readout routines for superconducting qubits has been assignment fidelity; however, this method only focuses on the preparation of computational basis states and therefore does not provide a complete characterization of the readout. Here, we expand the focus to the use of detector tomography to fully characterize multiqubit readout of superconducting transmon qubits. The impact of different readout parameters on the rate of information extraction is studied using quantum-state reconstruction infidelity as a proxy. The results are then compared with assignment fidelities, showing good agreement for separable two-qubit states. We therefore propose the rate of infidelity convergence as a validation tool for assignment fidelity and a more comprehensive benchmark for single- and multiqubit readout optimization. To make the best use of experimental resources, we investigate the most efficient distribution of a limited shot budget between detector tomography and state reconstruction within the context of single- and two-qubit experiments. To address the growing interest in three-qubit gates and test the scalability of the validation tool, we perform three-qubit quantum-state tomography that goes beyond conventional readout-error-mitigation methods and find a factor-of-30 reduction in quantum infidelity. Our results demonstrate that qubit readout correlations are not induced by a significantly reduced state distinguishability. Consequently, correlation coefficients can serve as a valuable tool in qubit readout optimization.

arXiv:2502.08589•Physical Review Applied•Sep 15, 2025•4 citations

Analysis of a parametrically driven exchange-type gate and a two-photon excitation gate between superconducting qubits

Marco Roth, Marc Ganzhorn, Nikolaj Moll +3 more

A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.

arXiv:1708.02090•Physical Review A•Dec 20, 2017•90 citations

Quantum speeding-up of computation demonstrated in a superconducting two-qubit processor

Andreas Dewes, Romain Lauro, Florian R. Ong +5 more

We operate a superconducting quantum processor consisting of two tunable transmon qubits coupled by a swapping interaction, and equipped with nondestructive single-shot readout of the two qubits. With this processor, we run the Grover search algorithm among four objects and find that the correct answer is retrieved after a single run with a success probability between $0.52$ and $0.67$, which is significantly larger than the $0.25$ achieved with a classical algorithm. This constitutes a proof of concept for the quantum speed-up of electrical quantum processors.

Physical Review B•Apr 5, 2012•33 citations

Quantum process tomography of the single-shot entangling gate with superconducting qubits

Hamid Sakhouf, Mohammed Daoud A, R. Ahl Laamara

Abstract A single-shot entangling gate plays a crucial role in quantum information processing due to its high fidelity. This operation gate is fast to create a maximally entangled state and forms a universal gate set for quantum computing. Currently, the preparation and demonstration of multi-qubit entanglement are achieved based on sequences of single- and two-qubit operations, yielding lower fidelity and requiring longer execution time. Here, we demonstrate by numerically simulating the use of quantum process tomography to fully characterize the performance of a single-shot three-qubit entangling gate. This gate is used to create a Greenberger–Horne–Zeilinger entangled state in Sakhouf et al (2021 J. Phys. B: At. Mol. Opt. Phys. 54 175501), directly generated by three transmon-type superconducting qubits which are mediated by a resonator with the assistance of a microwave field. Comparing ideal and simulated quantum process tomography, we characterize the entangling gate performance by calculating the mean fidelity achieving a high value ≻ 0.93 .

Journal of Physics B Atomic Molecular and Optical Physics•Mar 30, 2023•4 citations

Gatemon Benchmarking and Two-Qubit Operations

Lucas Casparis, T. W. Larsen, M. S. Olsen +5 more

Recent experiments have demonstrated superconducting transmon qubits with semiconductor nanowire Josephson junctions. These hybrid gatemon qubits utilize field effect tunability characteristic of semiconductors to allow complete qubit control using gate voltages, potentially a technological advantage over conventional flux-controlled transmons. Here, we present experiments with a two-qubit gatemon circuit. We characterize qubit coherence and stability and use randomized benchmarking to demonstrate single-qubit gate errors below 0.7% for all gates, including voltage-controlled Z rotations. We show coherent capacitive coupling between two gatemons and coherent swap operations. Finally, we perform a two-qubit controlled-phase gate with an estimated fidelity of 91%, demonstrating the potential of gatemon qubits for building scalable quantum processors.

arXiv:1512.09195•Physical Review Letters•Apr 15, 2016•92 citations
We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.
In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.
The accurate measurement of quantum two-level objects (qubits) is crucial for developing quantum computers. Over the last decade, the measure of choice for benchmarking readout routines for superconducting qubits has been assignment fidelity; however, this method only focuses on the preparation of computational basis states and therefore does not provide a complete characterization of the readout. Here, we expand the focus to the use of detector tomography to fully characterize multiqubit readout of superconducting transmon qubits. The impact of different readout parameters on the rate of information extraction is studied using quantum-state reconstruction infidelity as a proxy. The results are then compared with assignment fidelities, showing good agreement for separable two-qubit states. We therefore propose the rate of infidelity convergence as a validation tool for assignment fidelity and a more comprehensive benchmark for single- and multiqubit readout optimization. To make the best use of experimental resources, we investigate the most efficient distribution of a limited shot budget between detector tomography and state reconstruction within the context of single- and two-qubit experiments. To address the growing interest in three-qubit gates and test the scalability of the validation tool, we perform three-qubit quantum-state tomography that goes beyond conventional readout-error-mitigation methods and find a factor-of-30 reduction in quantum infidelity. Our results demonstrate that qubit readout correlations are not induced by a significantly reduced state distinguishability. Consequently, correlation coefficients can serve as a valuable tool in qubit readout optimization.
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.
We operate a superconducting quantum processor consisting of two tunable transmon qubits coupled by a swapping interaction, and equipped with nondestructive single-shot readout of the two qubits. With this processor, we run the Grover search algorithm among four objects and find that the correct answer is retrieved after a single run with a success probability between 0.520.520.52 and 0.670.670.67, which is significantly larger than the 0.250.250.25 achieved with a classical algorithm. This constitutes a proof of concept for the quantum speed-up of electrical quantum processors.
Abstract A single-shot entangling gate plays a crucial role in quantum information processing due to its high fidelity. This operation gate is fast to create a maximally entangled state and forms a universal gate set for quantum computing. Currently, the preparation and demonstration of multi-qubit entanglement are achieved based on sequences of single- and two-qubit operations, yielding lower fidelity and requiring longer execution time. Here, we demonstrate by numerically simulating the use of quantum process tomography to fully characterize the performance of a single-shot three-qubit entangling gate. This gate is used to create a Greenberger–Horne–Zeilinger entangled state in Sakhouf et al (2021 J. Phys. B: At. Mol. Opt. Phys. 54 175501), directly generated by three transmon-type superconducting qubits which are mediated by a resonator with the assistance of a microwave field. Comparing ideal and simulated quantum process tomography, we characterize the entangling gate performance by calculating the mean fidelity achieving a high value ≻ 0.93 .
Recent experiments have demonstrated superconducting transmon qubits with semiconductor nanowire Josephson junctions. These hybrid gatemon qubits utilize field effect tunability characteristic of semiconductors to allow complete qubit control using gate voltages, potentially a technological advantage over conventional flux-controlled transmons. Here, we present experiments with a two-qubit gatemon circuit. We characterize qubit coherence and stability and use randomized benchmarking to demonstrate single-qubit gate errors below 0.7% for all gates, including voltage-controlled Z rotations. We show coherent capacitive coupling between two gatemons and coherent swap operations. Finally, we perform a two-qubit controlled-phase gate with an estimated fidelity of 91%, demonstrating the potential of gatemon qubits for building scalable quantum processors.