Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2010.11938 · Superconductor Science and Technology

Enhancing the performance of superconducting nanowire-based detectors with high-filling factor by using variable thickness

Reza Baghdadi, Ekkehart Schmidt, Saman Jahani, Ilya Charaev, Michael G W Müller, Marco Colangelo, Di Zhu, Konstantin Ilin, Alexej D Semenov, Zubin Jacob, Michael Siegel, Karl K. Berggren

Published Jan 14, 2021• 22 citations
arXivHTMLPDF

Abstract

Abstract Current crowding at bends of superconducting nanowire single-photon detector (SNSPD) is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce the influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.

DOI
10.1088/1361-6668/abdba6

Related papers

Enhancing the performance of superconducting nanowire-based detectors with high-filling factor by using variable thickness

Reza Baghdadi, Ekkehart Schmidt, Saman Jahani +9 more

© 2021 IOP Publishing Ltd. Current crowding at bends of superconducting nanowire single-photon detector (SNSPD) is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce the influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.

•Jan 1, 2021•14 citations

Reducing current crowding in meander superconducting strip single-photon detectors by thickening bends

Jia-Min Xiong, Weijun Zhang, Guangzhao Xu +8 more

Abstract To facilitate high optical coupling efficiency and absorptance, the active area of a superconducting nano/microstrip single-photon detector (SNSPD/SMSPD) is often designed as a meander configuration with a high filling factor (e.g. ⩾0.5). However, the switching current (I sw) of SNSPD/SMSPD, at which the detector switches into the normal state, is significantly suppressed by a geometry-induced ‘current crowding effect’, where there are sharp bends in the strip. Here, we propose and experimentally verify an alternative method to reduce current crowding both in SNSPD and SMSPD by directly increasing the thickness of the bends through the deposition and lift-off of a secondary superconducting film. We measure and compare the performance of SNSPDs and SMSPDs with different filling factors and bend configurations, with or without thickened bends. Improvements for detectors were observed in detection efficiency, intrinsic dark count rate, and time jitter, owing to the enhanced I sw. Our method provides a promising way of optimizing SNSPD/SMSPD detection performance.

arXiv:2112.08009•Superconductor Science and Technology•Mar 22, 2022•18 citations

Current crowding–free superconducting nanowire single-photon detectors

Stefan Strohauer, Fabian Wietschorke, Christian Schmid +5 more

Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their near-unity detection efficiency, subhertz dark count rates, and picosecond timing jitter. However, a local increase of current density (current crowding) in the bends of meander-shaped SNSPDs limits these performance metrics. By locally irradiating the SNSPD’s straight segments with helium ions while leaving the bends unirradiated, we realize current crowding–free SNSPDs with simultaneously enhanced sensitivity: After irradiation with 800 ions nm −2 , locally irradiated SNSPDs showed a relative saturation plateau width of 37%, while fully irradiated SNSPDs reached only 10%. This larger relative plateau width allows operation at lower relative bias currents, thereby reducing the dark count rate while still detecting single photons efficiently. We achieve an internal detection efficiency of 94% with 7 mHz dark count rate near the onset of saturating detection efficiency for a wavelength of 780 nm.

arXiv:2407.14171•Science Advances•Mar 28, 2025•11 citations

Reduced dark counts in optimized geometries for superconducting nanowire single photon detectors

Mohsen K. Akhlaghi, Haig A. Atikian, Amin Eftekharian +2 more

We have experimentally compared the critical current, dark count rate and photo-response of 100nm wide superconducting nanowires with different bend designs. Enhanced critical current for nanowires with optimally rounded bends, and thus with no current crowding, are observed. Furthermore, we find that the optimally designed bend significantly reduces the dark counts without compromising the photo-response of the device. The results can lead to major improvements in superconducting nanowire single photon detectors.

arXiv:1205.4290•Optics Express•Oct 1, 2012•49 citations

High quantum efficiency and low dark count rate in multi-layer superconducting nanowire single-photon detectors

Amir Jafari Salim, Amin Eftekharian, A. Hamed Majedi

In this paper, we theoretically show that a multi-layer superconducting nanowire single-photon detector (SNSPD) is capable of approaching characteristics of an ideal SNSPD in terms of the quantum efficiency, dark count, and band-width. A multi-layer structure improves the performance in two ways. First, the potential barrier for thermally activated vortex crossing, which is the major source of dark counts and the reduction of the critical current in SNSPDs is elevated. In a multi-layer SNSPD, a vortex is made of 2D-pancake vortices that form a stack. It will be shown that the stack of pancake vortices effectively experiences a larger potential barrier compared to a vortex in a single-layer SNSPD. This leads to an increase in the experimental critical current as well as significant decrease in the dark count rate. In consequence, an increase in the quantum efficiency for photons of the same energy or an increase in the sensitivity to photons of lower energy is achieved. Second, a multi-layer structure improves the efficiency of single-photon absorption by increasing the effective optical thickness without compromising the single-photon sensitivity.

Journal of Applied Physics•Feb 7, 2014•15 citations

Broadening of hot-spot response spectrum of superconducting NbN nanowire single-photon detector with reduced nitrogen content

D. Henrich, S. Dörner, M. Hofherr +6 more

The spectral detection efficiency and the dark count rate of superconducting nanowire single-photon detectors (SNSPD) have been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a decrease of the dark count rates more than two orders of magnitude and in a red shift of the cut-off wavelength of the hot-spot SNSPD response. The observed phenomena are explained by an improvement of uniformity of NbN films that has been confirmed by a decrease of resistivity and an increase of the ratio of the measured critical current to the depairing current. The latter factor is considered as the most crucial for both the cut-off wavelength and the dark count rates of SNSPD. Based on our results we propose a set of criteria for material properties to optimize SNSPD in the infrared spectral region.

arXiv:1207.2014•Journal of Applied Physics•Oct 1, 2012•53 citations
Abstract Current crowding at bends of superconducting nanowire single-photon detector (SNSPD) is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce the influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.
© 2021 IOP Publishing Ltd. Current crowding at bends of superconducting nanowire single-photon detector (SNSPD) is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce the influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.
Abstract To facilitate high optical coupling efficiency and absorptance, the active area of a superconducting nano/microstrip single-photon detector (SNSPD/SMSPD) is often designed as a meander configuration with a high filling factor (e.g. ⩾0.5). However, the switching current (I sw) of SNSPD/SMSPD, at which the detector switches into the normal state, is significantly suppressed by a geometry-induced ‘current crowding effect’, where there are sharp bends in the strip. Here, we propose and experimentally verify an alternative method to reduce current crowding both in SNSPD and SMSPD by directly increasing the thickness of the bends through the deposition and lift-off of a secondary superconducting film. We measure and compare the performance of SNSPDs and SMSPDs with different filling factors and bend configurations, with or without thickened bends. Improvements for detectors were observed in detection efficiency, intrinsic dark count rate, and time jitter, owing to the enhanced I sw. Our method provides a promising way of optimizing SNSPD/SMSPD detection performance.
Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their near-unity detection efficiency, subhertz dark count rates, and picosecond timing jitter. However, a local increase of current density (current crowding) in the bends of meander-shaped SNSPDs limits these performance metrics. By locally irradiating the SNSPD’s straight segments with helium ions while leaving the bends unirradiated, we realize current crowding–free SNSPDs with simultaneously enhanced sensitivity: After irradiation with 800 ions nm −2 , locally irradiated SNSPDs showed a relative saturation plateau width of 37%, while fully irradiated SNSPDs reached only 10%. This larger relative plateau width allows operation at lower relative bias currents, thereby reducing the dark count rate while still detecting single photons efficiently. We achieve an internal detection efficiency of 94% with 7 mHz dark count rate near the onset of saturating detection efficiency for a wavelength of 780 nm.
We have experimentally compared the critical current, dark count rate and photo-response of 100nm wide superconducting nanowires with different bend designs. Enhanced critical current for nanowires with optimally rounded bends, and thus with no current crowding, are observed. Furthermore, we find that the optimally designed bend significantly reduces the dark counts without compromising the photo-response of the device. The results can lead to major improvements in superconducting nanowire single photon detectors.
In this paper, we theoretically show that a multi-layer superconducting nanowire single-photon detector (SNSPD) is capable of approaching characteristics of an ideal SNSPD in terms of the quantum efficiency, dark count, and band-width. A multi-layer structure improves the performance in two ways. First, the potential barrier for thermally activated vortex crossing, which is the major source of dark counts and the reduction of the critical current in SNSPDs is elevated. In a multi-layer SNSPD, a vortex is made of 2D-pancake vortices that form a stack. It will be shown that the stack of pancake vortices effectively experiences a larger potential barrier compared to a vortex in a single-layer SNSPD. This leads to an increase in the experimental critical current as well as significant decrease in the dark count rate. In consequence, an increase in the quantum efficiency for photons of the same energy or an increase in the sensitivity to photons of lower energy is achieved. Second, a multi-layer structure improves the efficiency of single-photon absorption by increasing the effective optical thickness without compromising the single-photon sensitivity.
The spectral detection efficiency and the dark count rate of superconducting nanowire single-photon detectors (SNSPD) have been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a decrease of the dark count rates more than two orders of magnitude and in a red shift of the cut-off wavelength of the hot-spot SNSPD response. The observed phenomena are explained by an improvement of uniformity of NbN films that has been confirmed by a decrease of resistivity and an increase of the ratio of the measured critical current to the depairing current. The latter factor is considered as the most crucial for both the cut-off wavelength and the dark count rates of SNSPD. Based on our results we propose a set of criteria for material properties to optimize SNSPD in the infrared spectral region.