Determining the vibrational structure of a molecule is central to fundamental applications in several areas, from atmospheric science to catalysis, fuel combustion modeling, biochemical imaging, and astrochemistry. However, when significant anharmonicity and mode coupling are present, the problem is classically intractable for a molecule of just a few atoms. Here, we outline a set of quantum algorithms for solving the molecular vibrational structure problem for both near- and long-term quantum computers. There are previously unaddressed characteristics of this problem which require approaches distinct from most instances of the commonly studied quantum simulation of electronic structure: many eigenstates are often desired, states of interest are often far from the ground state (requiring methods for ``zooming in'' to some energy window), particle conservation is not required, and transition amplitudes with respect to a nonunitary Hermitian operator must be calculated. We address each of these hurdles and consider problem instances of four molecular vibrational Hamiltonians. Finally and most importantly, we give analytical and numerical results which suggest that, to a given energy precision, a vibrational problem instance will be simulatable on a quantum computer before an electronic structure problem instance. These results imply that more focus in the quantum information community ought to shift toward scientifically and industrially important quantum vibrational problems.
Determining the vibrational structure of a molecule is central to fundamental applications in several areas, from atmospheric science to catalysis, fuel combustion modeling, biochemical imaging, and astrochemistry. However, when significant anharmonicity and mode coupling are present, the problem is classically intractable for a molecule of just a few atoms. Here, we outline a set of quantum algorithms for solving the molecular vibrational structure problem for both near- and long-term quantum computers. There are previously unaddressed characteristics of this problem which require approaches distinct from most instances of the commonly studied quantum simulation of electronic structure: many eigenstates are often desired, states of interest are often far from the ground state (requiring methods for ``zooming in'' to some energy window), particle conservation is not required, and transition amplitudes with respect to a nonunitary Hermitian operator must be calculated. We address each of these hurdles and consider problem instances of four molecular vibrational Hamiltonians. Finally and most importantly, we give analytical and numerical results which suggest that, to a given energy precision, a vibrational problem instance will be simulatable on a quantum computer before an electronic structure problem instance. These results imply that more focus in the quantum information community ought to shift toward scientifically and industrially important quantum vibrational problems.
Molecular vibrations underpin important phenomena such as spectral properties, energy transfer, and molecular bonding. However, obtaining a detailed understanding of the vibrational structure of even small molecules is computationally expensive. While numerous algorithms exist for solving the electronic structure problem on a quantum computer, there has been comparatively little attention devoted to solving the vibrational structure problem with quantum hardware. In this work, we discuss the use of quantum algorithms for investigating both the static and dynamic vibrational properties of molecules. We introduce a physically motivated unitary vibrational coupled cluster ansatz, which also makes our method accessible to noisy, near-term quantum hardware. We numerically test our proposals for the water and sulfur dioxide molecules.
Molecular vibrations underpin important phenomena such as spectral properties, energy transfer, and molecular bonding. However, obtaining a detailed understanding of the vibrational structure of even small molecules is computationally expensive. While several algorithms exist for efficiently solving the electronic structure problem on a quantum computer, there has been comparatively little attention devoted to solving the vibrational structure problem with quantum hardware. In this work, we discuss the use of quantum algorithms for investigating both the static and dynamic vibrational properties of molecules. We introduce a physically motivated unitary vibrational coupled cluster ansatz, which also makes our method accessible to noisy, near-term quantum hardware. We numerically test our proposals for the water and sulfur dioxide molecules.
Quantum chemistry models atoms and molecules using quantum mechanics, with the electronic structure problem at its core. This problem, which determines the energy and properties of electrons in a molecule, is exponentially hard to solve exactly on classical computers. To approximate solutions, effective models introduce layers of simplifications. However, these approximations can fail for strongly correlated systems, necessitating alternative approaches. Quantum computers, capable of processing quantum information natively, offer a promising path to simulate molecular systems beyond classical reach, with potential applications in catalysis, materials science, and photochemistry. Despite rapid advancements in quantum hardware, practical quantum computations remain challenging due to limited resources. This thesis optimizes quantum resource usage in computational chemistry, introducing novel embedding techniques and exploring applications beyond ground-state energies. Chapter 1 establishes the foundation by reviewing quantum chemistry methods, from Hartree-Fock and Density Functional Theory (DFT) to active space approaches. It also provides an introduction to quantum computing for chemistry, focusing on near-term algorithms. The following chapters present novel methods aimed at reducing quantum resource requirements and tackling problems classical methods struggle with. Chapter 2 introduces a technique to reduce the λ-norm of the electronic structure Hamiltonian, a key measure of quantum resource demand. By transforming molecular orbitals, this method enhances sampling efficiency in Noisy Intermediate-Scale Quantum (NISQ) algorithms and reduces runtime in Fault-Tolerant Quantum Computing (FTQC). Localized orbitals outperform canonical ones, and an orbital-optimization scheme is proposed to minimize the λ-norm. Benchmarks on hydrogen chains, FeMoco, and Ruthenium complexes demonstrate its effectiveness. Chapter 3 presents the FragPT2 framework for simulating large systems with multiple interacting fragments. This method embeds each fragment in the mean field of others and applies multi-reference perturbation theory to capture inter-fragment correlations such as dispersion and charge transfer efficiently. The approach reduces computational overhead and enables scalable simulations, as shown in applications to \ce{N2} dimers, aromatic dimers, and butadiene. Chapter 4 focuses on photochemical systems, where multiple electronic states must be treated equally. The state-averaged orbital-optimized variational quantum eigensolver (SAOOVQE) is extended with analytical energy gradients and non-adiabatic couplings, enabling geometry optimizations and simulations of non-adiabatic dynamics on quantum hardware. This is demonstrated by locating the conical intersection in formaldimine, highlighting SAOOVQE’s potential for studying photoisomerization in biomolecules. Building on this, Chapter 5 develops a quantum algorithm to detect conical intersections, where the Born-Oppenheimer approximation breaks down. These intersections are characterized by a discrete Berry phase (0 or π), representing their topological nature. The algorithm extracts this phase as a single bit of information, ensuring resilience to noise. Analytical proof and numerical validation using a toy molecular model illustrate its effectiveness for studying light-perception biochemistry and related photochemical processes. Finally, Chapter 6 explores machine learning density functionals trained on noisy quantum data. While DFT is computationally efficient, its accuracy depends on approximated exchange-correlation functionals. This work proposes a neural network-based approach to learn the exact functional from quantum data, showing that training on noisy outputs from NISQ devices can mitigate sampling errors. Applications to the Fermi-Hubbard model and other systems demonstrate its potential to generalize and provide accurate results under noise. This thesis advances quantum computational chemistry by optimizing quantum resource usage, developing new embedding strategies, and expanding the scope of quantum simulations beyond ground-state properties. These contributions pave the way for practical quantum algorithms that could revolutionize molecular simulations in the near future.
Determining properties of molecules and materials is one of the premier applications of quantum computing. A major question in the thesis is: how might we use long- and near-term quantum computers to solve problems of chemical interest? First, we give an overview of the standard model in electronic structure theory. Electronic structure methods have been improved significantly in the last decades; however, it is still a non-trivial task to fit experimental results for complex molecular systems. Second, we introduce quantum computation and quantum algorithms as an alternative device to solve the electronic structure problem. In the remaining part of the thesis, we describe the research projects. The thesis covers two (rather different) research directions: software and hardware projects. For the software part, we contribute with two new algorithms: Phase-Estimation Interval Target Energy Readout (PHILTER) and Recursive Variational Series Estimation (RVSE), where both are designed to be run on a quantum digital computer and extract materials and molecular properties. The PHILTER algorithm is a modification of the Quantum Phase Estimation and is designed to compute excited state energies within a target energy-interval for cases where good approximations for the states in the target energy-interval are either unknown or hard to prepare. For the RVSE algorithm, we pose the question: how might we use imperfect near-term quantum computers to solve problems of practical value? In this work, we introduce a method to compute expectation values of general functions of a Hamiltonian with respect to an input state using low depth quantum circuits suitable for noisy intermediate-scale quantum computers. For the hardware part, we propose a new chemical quantum computer by using molecular electronics as a basis for quantum computing. In this work, we pose the question: can scattering of electrons in molecules produce quantum gates? We construct one-qubit gates using one-electron scattering in molecules, and two-qubit controlled-phase gates using electron-electron scattering along metallic leads. We show initial applications of the framework by illustrating one-qubit gates using the molecular electronic structure of molecular hydrogen as a baseline model.
In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.
We present a quantum algorithm for calculating the vibronic spectrum of a molecule, a useful but classically hard problem in chemistry. We show several advantages over previous quantum approaches: vibrational anharmonicity is naturally included; after measurement, some state information is preserved for further analysis; and there are potential error-related benefits. Considering four triatomic molecules, we numerically study truncation errors in the harmonic approximation. Further, in order to highlight the fact that our quantum algorithm's primary advantage over classical algorithms is in simulating anharmonic spectra, we consider the anharmonic vibronic spectrum of sulfur dioxide. In the future, our approach could aid in the design of materials with specific light-harvesting and energy transfer properties, and the general strategy is applicable to other spectral calculations in chemistry and condensed matter physics.