Superconducting quantum technologies require qubit systems whose properties meet several often conflicting requirements, such as long coherence times and high anharmonicity. Here, we provide an engineering framework based on a generalized superconducting qubit model in the flux regime, which abstracts multiple circuit design parameters and thereby supports design optimization across multiple qubit properties. We experimentally investigate a special parameter regime which has both high anharmonicity ($\sim\!1$GHz) and long quantum coherence times ($T_1\!=\!40\!-\!80\,\mathrm{μs}$ and $T_\mathrm{2Echo}\!=\!2T_1$).
Superconducting quantum technologies require qubit systems whose properties meet several often conflicting requirements, such as long coherence times and high anharmonicity. Here, we provide an engineering framework based on a generalized superconducting qubit model in the flux regime, which abstracts multiple circuit design parameters and thereby supports design optimization across multiple qubit properties. We experimentally investigate a special parameter regime which has both high anharmonicity (∼1GHz) and long quantum coherence times (T1=40−80μs and T2Echo=2T1).
Multimode superconducting circuits offer a promising platform for engineering robust systems for quantum computation. Previous studies indicate that single-mode devices cannot be engineered to simultaneously exhibit resilience against multiple decoherence sources due to conflicting requirements. In contrast, multimode systems offer increased flexibility and have proven capable of overcoming these fundamental limitations. Here, we present a multimode device optimized for quantum information processing. It features an anharmonicity of a third of the qubit frequency and reduced energy dispersion caused by charge and magnetic flux fluctuations. It exhibits improvements over the fundamental errors limiting transmon and fluxonium coherence and control, achieving ratios between the total coherence time and the gate time T 2 / t g one order of magnitude larger than transmon and two times larger than fluxonium for microwave charge drives, assuming equal dielectric and inductive loss quality factors and limited drive strength. Simulations further demonstrate the device’s robustness to circuit parameter deviations, a known limitation of many multimode devices.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.
Designing a qubit architecture is one of the most critical challenges in achieving scalable and fault-tolerant quantum computing as the performance of a quantum computer is heavily dependent on the coherence times, connectivity and low noise environments. Superconducting qubits have emerged as a frontrunner among many competing technologies, primarily because of their speed of operations, relatively well-developed and offer a promising path toward scalability. Here, we address the challenges of optimizing superconducting qubit hardware through the development of a comprehensive theoretical framework that spans the entire process - from design to the calibration of hardware through quantum gate execution. We develop this framework in four key steps: circuit design, electromagnetic analysis, spectral analysis, and pulse sequencing with calibration. We first refine the qubit's core components - such as capacitance, Josephson junctions, and resonators - to set the foundation for strong performance. The electromagnetic analysis, using the Lumped Oscillator model, allows us to map out the capacitance matrix, ensuring that we minimize spectral dispersion while maximizing coherence times. Following this, we conduct spectral analysis to fine-tune the qubit's frequency spectrum and coherence properties, ensuring that the qubit parameters are optimized. Finally, we focus on pulse sequencing, including pulse-width optimization, DRAG optimization, and randomized benchmarking, to achieve high gate fidelity. We applied this framework to both Transmon and Fluxonium qubits, obtaining results that closely match those found in experimental studies. This work provides a detailed and practical approach to the design, optimization, and calibration of superconducting qubits, contributing to the broader effort to develop scalable quantum computing technologies.
Superconducting devices as quantum bits (qubits) are one of the most promising candidates for implementing a practical quantum computer. Over the last decade, quantum coherence times of superconducting qubits have been continuously improved. Operating qubits in noise insensitive points, eliminating the participation of the lossy materials, and better isolation from environment increased the decoherence times from nanoseconds to tens of microseconds. One recent approach on the qubit design is to shunt the Josephson junctions with large capacitors to reduce the sensitivity to noise and to redistribute the stored electromagnetic energy in a well-engineered area. This approach was first applied on charge qubits and later adopted to other types of superconducting qubits. \n \nIn this thesis, we present the design and the characterization of a three-Josephson junction superconducting circuit with three large shunt capacitors. We present experiments on decoherence in the circuit used as a qubit. The qubit relaxation time T₁ is reaching as high as 47 μs and the spin-echo dephasing time T₂ = 9.4 μs. In addition, we present spectroscopy experiments and decoherence characterization in the qutrit subspace formed by the lowest three energy levels. The spectroscopy data is in excellent agreement with the complete circuit model based on the system capacitance matrix. At the flux symmetry point, the circuit has a large anharmonicity, defined as the difference between the 1-2 and 0-1 transition frequencies, approaching 2π × 3.7 GHz, which is enabling fast single qubit operations. We performed randomized benchmarking with the qubit gates with a duration of 1.62 ns and an average gate fidelity of 99.9%. \n \nMoreover, we present experiments with multi-level control in qutrit subspace, formed by the lowest three energy levels. We demonstrate a single step experimental implementation of a generalized Walsh-Hadamard gate. We use a decomposition of the quantum gate into two unitary operations, one implemented by an off-diagonal Hamiltonian and the other implemented by a diagonal Hamiltonian. The off-diagonal Hamiltonian is obtained by the simultaneous driving of the transitions between levels 0-1, 1-2, and 0-2, with the latter being a two-photon process. The diagonal Hamiltonian is effectively implemented by appropriately shifting the phases of adjacent pulses. The gate is characterized using tomography process and the average fidelity exceeds 90%, in good agreement with numerical simulations that take into account the multi-level structure of the system.
The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). Here, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad frequency tunability, strong anharmonicity, high reproducibility, and relaxation times in excess of 40μs at its flux-insensitive point. Qubit relaxation times T1 across 22 qubits are consistently matched with a single model involving resonator loss, ohmic charge noise, and 1/f flux noise, a noise source previously considered primarily in the context of dephasing. We furthermore demonstrate that qubit dephasing at the flux-insensitive point is dominated by residual thermal photons in the readout resonator. The resulting photon shot noise is mitigated using a dynamical decoupling protocol, resulting in T2≈85μs, approximately the 2T1 limit. In addition to realizing an improved flux qubit, our results uniquely identify photon shot noise as limiting T2 in contemporary qubits based on transverse qubit-resonator interaction.
Superconducting flux qubits are promising candidates for the physical realization of a scalable quantum processor. Indeed, these circuits may have both a small decoherence rate and a large anharmonicity. These properties enable the application of fast quantum gates with high fidelity and reduce scaling limitations due to frequency crowding. The major difficulty of flux qubits' design consists of controlling precisely their transition energy - the so-called qubit gap - while keeping long and reproducible relaxation times. Solving this problem is challenging and requires extremely good control of e-beam lithography, oxidation parameters of the junctions and sample surface. Here we present measurements of a large batch of flux qubits and demonstrate a high level of reproducibility and control of qubit gaps, relaxation times and pure echo dephasing times. These results open the way for potential applications in the fields of quantum hybrid circuits and quantum computation.