Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near infrared single-photon detection, owing to their outstanding performance. Conventional SNSPDs are generally used as binary photon-counting detector. Another important characteristic of light, i.e., polarization, has not been resolved using standalone SNSPDs. In this work, we simulated, fabricated, and characterized a linear polarimeter based on a four-pixel NbN superconducting nanowire array, capable of resolving the polarization state of linearly polarized light at the single-photon level. The detector array design is based on a division of focal plane sensor, in which the orientation of each nanowire division (pixel) is offset by 45 degree. Each single nanowire pixel operates as a combination of photon detector and almost linear polarization filter, with an average polarization extinction ratio of approximately 10. The total system detection efficiency with four pixels is approximately 1% at a total dark count rate of 680 cps, when the detector array is free-space coupled and illuminated with 1550 nm photons. The Stokes parameters are extracted from polarization measurements of the four pixels. The mean errors of the measured AoP and DoLP were about -3 degree and 0.12, respectively. Our results indicate that it is possible to develop a scalable polarization polarimeter or imager based on a superconducting nanowire array. This detector array may find promising application in single-photon polarization detection and imaging.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near infrared single-photon detection, owing to their outstanding performance. Conventional SNSPDs are generally used as binary photon-counting detector. Another important characteristic of light, i.e., polarization, has not been resolved using standalone SNSPDs. In this work, we simulated, fabricated, and characterized a linear polarimeter based on a four-pixel NbN superconducting nanowire array, capable of resolving the polarization state of linearly polarized light at the single-photon level. The detector array design is based on a division of focal plane sensor, in which the orientation of each nanowire division (pixel) is offset by 45 degree. Each single nanowire pixel operates as a combination of photon detector and almost linear polarization filter, with an average polarization extinction ratio of approximately 10. The total system detection efficiency with four pixels is approximately 1% at a total dark count rate of 680 cps, when the detector array is free-space coupled and illuminated with 1550 nm photons. The Stokes parameters are extracted from polarization measurements of the four pixels. The mean errors of the measured AoP and DoLP were about -3 degree and 0.12, respectively. Our results indicate that it is possible to develop a scalable polarization polarimeter or imager based on a superconducting nanowire array. This detector array may find promising application in single-photon polarization detection and imaging.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near-infrared single-photon detection due to their outstanding performance. However, conventional SNSPDs are generally used as binary photon-counting detectors. Another important characteristic of light, i.e., polarization, which can provide additional information of the object, has not been resolved using the standalone SNSPD. In this work, we present a first prototype of the polarimeter based on a four-pixel superconducting nanowire array, capable of resolving the polarization state of linearly-polarized light at the single-photon level. The detector array design is based on a division of focal plane configuration in which the orientation of each nanowire division (pixel) is offset by 45°. Each single nanowire pixel operates as a combination of a photon detector and almost linear polarization filter, with an average polarization extinction ratio of ∼10. The total system detection efficiency of the array is ∼1% at a total dark count rate of 680 cps, with a timing jitter of 126 ps, when the detector array is free-space coupled and illuminated with 1550-nm photons. The mean errors of the measured angle of polarization and degree of linear polarization were about -3° and 0.12, respectively. Furthermore, we successfully demonstrated polarization imaging at low-light level using the proposed detector. Our results pave the way for the development of a single-photon sensitive, fast, and large-scale integrated polarization polarimeter or imager. Such detector may find promising application in photon-starved polarization resolving and imaging with high spatial and temporal resolution.
Abstract Superconducting nanowire single-photon detectors (SNSPDs) are widely used for the detection of visible and near-infrared single photons. Due to the nature of the polarization sensitive absorption of the nanowire, the detection efficiency (DE) of the meander SNSPD is polarization sensitive. In order to obtain a polarization-insensitive device with high DE, we fabricated NbN SNSPDs with spiral structure, which were embedded into an optical cavity. No meaningful current crowding effect was observed in the spiral SNSPDs. The spiral SNSPD showed a maximal system detection efficiency of 52.5% at 1550 nm with a dark count rate of 100 Hz and a polarization extinction ratio of 1.04, due to the combination of a spiral geometry and an optical cavity.
Superconducting nanowire single photon detector (SNSPD) has been widely used in many fields such as quantum communication due to its extremely high detection efficiency, low dark count rate, high count rate, and low timing jitter. Compared with conventional single-photon detectors with planar structure, SNSPD is typically made a periodical meandering structure consisting of parallel straight nanowires. However, owing to its unique linear structure, the detection efficiency of SNSPD is dependent on the polarization state of incident light, thus limiting SNSPD’s applications in unconventional fiber links or other incoherent light detection. In this paper, a polarization-insensitive SNSPD with high detection efficiency is proposed based on the traditional meandering nanowire structure. A thin silicon film with a high refractive index is introduced as a cladding layer of nanowires to reduce the dielectric mismatch between the nanowire and its surroundings, thereby improving the optical absorption efficiency of nanowires to the transverse-magnetic (TM) polarized incident light. The cladding layer is designed as a sinusoidal-shaped grating structure to minimize the difference in optical absorption efficiency between the transverse electric (TE) polarized incident light and the TM polarized incident light in a wide wavelength range. In addition, the twin-layer nanowire structure and the dielectric mirror are used to improve the optical absorption efficiency of the device. Our simulation results show that with the optimal parameters, the optical absorption efficiency of nanowires to both of the TE polarized incident light and TM polarized incident light has a maximum of over 90% at 1550 nm, and the corresponding polarization extinction ratio is less than 1.22. The fabricated device possesses a maximum detection efficiency of 87% at 1605 nm and a polarization extinction ratio of 1.06. The measured detection efficiency exceeds 50% with a polarization extinction ratio less than 1.2 in a wavelength range from 1505 nm to 1630 nm. This work provides a reference for high-efficiency polarization-insensitive SNSPD in the future.
We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.
Light polarization is a primary degree of freedom for encoding quantum information. The scaling up of photonic quantum networks and computer architecture depends crucially on its precise characterization. This is typically achieved by placing external waveplates, polarizers, moving mounts, and recently metasurfaces, on top of the detectors. All these solutions complicate integration and scaling. Here we break convention with traditional architecture and present a monolithic, self-aligned metal-superconductor nanowire single photon detector (M-SNSPD) possessing intrinsic full polarization selectivity. Gold nanowires, co-fabricated atop NbTiN superconducting nanowires within the same lithographic footprint, act as polarization-selective plasmonic metamaterials inducing resonant absorption in the NbTiN. U-shaped wires provide linear polarization selectivity, while S-shaped meanders distinguish circular polarization, while retaining the high-count rates and low dark count rates of conventional SNSPDs. By arranging them into a four-pixel array we realize simultaneous projection onto four polarizations and demonstrate continuous polarization state tomography with an ensemble average fidelity exceeding 98%. Our approach opens new avenues towards scalable detector arrays with integrated plasmonic functionalities, for single photon polarimetry, imaging and spectroscopy.
Polarization sensitive photo-detectors are the key to the implementation of the polarimetric imaging systems, which are proved to have superior performance than their traditional counterparts based on intensity discriminations. In this article, we report the demonstration of a superconducting nanowire single photon detector (SNSPD) of which the response is ultra-sensitive to the polarization state of the incident photons. Measurements carried out on a fabricated SNSPD show that a device efficiency of ~48% can be achieved at 1550 nm for the case of parallel polarization, which is ~420 times larger than that for the case of perpendicular polarization. While the reported polarization ultra-sensitive technique is demonstrated on a single-pixel SNSPD, it is also fully compatible with the multi-pixel SNSPD array platforms that emerged recently.