Polarization sensitive photo-detectors are the key to the implementation of the polarimetric imaging systems, which are proved to have superior performance than their traditional counterparts based on intensity discriminations. In this article, we report the demonstration of a superconducting nanowire single photon detector (SNSPD) of which the response is ultra-sensitive to the polarization state of the incident photons. Measurements carried out on a fabricated SNSPD show that a device efficiency of ~48% can be achieved at 1550 nm for the case of parallel polarization, which is ~420 times larger than that for the case of perpendicular polarization. While the reported polarization ultra-sensitive technique is demonstrated on a single-pixel SNSPD, it is also fully compatible with the multi-pixel SNSPD array platforms that emerged recently.
Polarization sensitive photo-detectors are the key to the implementation of the polarimetric imaging systems, which are proved to have superior performance than their traditional counterparts based on intensity discriminations. In this article, we report the demonstration of a superconducting nanowire single photon detector (SNSPD) of which the response is ultra-sensitive to the polarization state of the incident photons. Measurements carried out on a fabricated SNSPD show that a device efficiency of ~48% can be achieved at 1550 nm for the case of parallel polarization, which is ~420 times larger than that for the case of perpendicular polarization. While the reported polarization ultra-sensitive technique is demonstrated on a single-pixel SNSPD, it is also fully compatible with the multi-pixel SNSPD array platforms that emerged recently.
Sensor arrays for fast-speed polarimetric imaging rely on the developments of the polarization sensitive photodetectors, of which the absorption efficiency and polarization extinction ratio (PER) are the two major design concerns. This paper presents the numerical results of the design of an efficient superconducting nanowire single photon detector (SNSPD) with high polarization sensitivity by taking advantage of the polarization dependent interferometric effect of a composite mirror. Numerical simulations show that for a SNSPD designed at 1550 nm, the absorption efficiency for parallel polarization is 95% and the PER is 1.5×104. The simulated high PER is in agreement with the value estimated from an analytical model. In order to demonstrate the practicability of the device design, it is also shown that the proposed SNSPD has a good tolerance on fabrication uncertainties. The proposed design of the polarization sensitive SNSPD has a feature that it allows the absorption efficiency and PER to be simultaneously optimized.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near-infrared single-photon detection due to their outstanding performance. However, conventional SNSPDs are generally used as binary photon-counting detectors. Another important characteristic of light, i.e., polarization, which can provide additional information of the object, has not been resolved using the standalone SNSPD. In this work, we present a first prototype of the polarimeter based on a four-pixel superconducting nanowire array, capable of resolving the polarization state of linearly-polarized light at the single-photon level. The detector array design is based on a division of focal plane configuration in which the orientation of each nanowire division (pixel) is offset by 45°. Each single nanowire pixel operates as a combination of a photon detector and almost linear polarization filter, with an average polarization extinction ratio of ∼10. The total system detection efficiency of the array is ∼1% at a total dark count rate of 680 cps, with a timing jitter of 126 ps, when the detector array is free-space coupled and illuminated with 1550-nm photons. The mean errors of the measured angle of polarization and degree of linear polarization were about -3° and 0.12, respectively. Furthermore, we successfully demonstrated polarization imaging at low-light level using the proposed detector. Our results pave the way for the development of a single-photon sensitive, fast, and large-scale integrated polarization polarimeter or imager. Such detector may find promising application in photon-starved polarization resolving and imaging with high spatial and temporal resolution.
Polarization sensitivity is an intrinsic characteristic of the superconducting nanowire single-photon detector (SNSPD). It is caused by the periodical meander structure of the SNSPD, and may severely limit the scope of the SNSPD's applications. In this study, we have designed and fabricated a SNSPD with much reduced polarization sensitivity, based on a previously published theoretical result that involves high refractive index compensation materials. Using a home-built broadband automatic measurement system, the device detection efficiencies of the fabricated SNSPD have been measured for wavelengths ranging from 1200 to 1700 nm. The measurement results show that the polarization sensitivity of the fabricated device is greatly reduced, with the device detection efficiencies at 1550 nm being 61% and 56% for cases of parallel and perpendicular polarizations, respectively. The measurement results are in good agreement with the numerical simulations.
Superconducting nanowire single photon detector (SNSPD) has been widely used in many fields such as quantum communication due to its extremely high detection efficiency, low dark count rate, high count rate, and low timing jitter. Compared with conventional single-photon detectors with planar structure, SNSPD is typically made a periodical meandering structure consisting of parallel straight nanowires. However, owing to its unique linear structure, the detection efficiency of SNSPD is dependent on the polarization state of incident light, thus limiting SNSPD’s applications in unconventional fiber links or other incoherent light detection. In this paper, a polarization-insensitive SNSPD with high detection efficiency is proposed based on the traditional meandering nanowire structure. A thin silicon film with a high refractive index is introduced as a cladding layer of nanowires to reduce the dielectric mismatch between the nanowire and its surroundings, thereby improving the optical absorption efficiency of nanowires to the transverse-magnetic (TM) polarized incident light. The cladding layer is designed as a sinusoidal-shaped grating structure to minimize the difference in optical absorption efficiency between the transverse electric (TE) polarized incident light and the TM polarized incident light in a wide wavelength range. In addition, the twin-layer nanowire structure and the dielectric mirror are used to improve the optical absorption efficiency of the device. Our simulation results show that with the optimal parameters, the optical absorption efficiency of nanowires to both of the TE polarized incident light and TM polarized incident light has a maximum of over 90% at 1550 nm, and the corresponding polarization extinction ratio is less than 1.22. The fabricated device possesses a maximum detection efficiency of 87% at 1605 nm and a polarization extinction ratio of 1.06. The measured detection efficiency exceeds 50% with a polarization extinction ratio less than 1.2 in a wavelength range from 1505 nm to 1630 nm. This work provides a reference for high-efficiency polarization-insensitive SNSPD in the future.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near infrared single-photon detection, owing to their outstanding performance. Conventional SNSPDs are generally used as binary photon-counting detector. Another important characteristic of light, i.e., polarization, has not been resolved using standalone SNSPDs. In this work, we simulated, fabricated, and characterized a linear polarimeter based on a four-pixel NbN superconducting nanowire array, capable of resolving the polarization state of linearly polarized light at the single-photon level. The detector array design is based on a division of focal plane sensor, in which the orientation of each nanowire division (pixel) is offset by 45 degree. Each single nanowire pixel operates as a combination of photon detector and almost linear polarization filter, with an average polarization extinction ratio of approximately 10. The total system detection efficiency with four pixels is approximately 1% at a total dark count rate of 680 cps, when the detector array is free-space coupled and illuminated with 1550 nm photons. The Stokes parameters are extracted from polarization measurements of the four pixels. The mean errors of the measured AoP and DoLP were about -3 degree and 0.12, respectively. Our results indicate that it is possible to develop a scalable polarization polarimeter or imager based on a superconducting nanowire array. This detector array may find promising application in single-photon polarization detection and imaging.
Abstract Polarization-resolved single-photon detection is a key requirement for advanced quantum photonic applications, including polarization-encoded quantum communication and polarimetric imaging. Although various superconducting nanowire single-photon detector architectures have demonstrated high polarization extinction ratios, concurrently achieving high optical absorption efficiency remains a nontrivial challenge. We propose a compact detector design in which a superconducting nanowire is embedded within a polarization-sensitive silicon grating cavity. The cavity supports distinct longitudinal resonances depending on the incident polarization, thereby enabling selective enhancement of absorption for the desired polarization state. Notably, this configuration introduces minimal fabrication complexity compared to conventional SNSPDs, as the grating cavity can be etched concurrently with the nanowire meander. In numerical simulations, our detector design achieves an absorption efficiency of up to 89.96% and a polarization extinction ratio of 32.39 dB , with a fill factor of just 7%. These results represent a significant advancement toward realizing high-performance, polarization-discriminating single-photon detectors.