Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2004.12147 · Physical Review A

Biselective pulses for large-area atom interferometry

Jack Saywell, Max Carey, Ilya Kuprov, Tim Freegarde

Published Jun 22, 2020• 22 citations
arXivHTMLPDF

Abstract

We present designs for the augmentation ``mirror'' pulses of large-momentum-transfer atom interferometers that maintain their fidelity as the wave-packet momentum difference is increased. These biselective pulses, tailored using optimal control methods to the evolving bimodal momentum distribution, should allow greater interferometer areas and hence increased inertial measurement sensitivity, without requiring elevated Rabi frequencies or extended frequency chirps. Using an experimentally validated model, we have simulated the application of our pulse designs to large-momentum-transfer atom interferometry using stimulated Raman transitions in a laser-cooled atomic sample of $^{85}\mathrm{Rb}$ at 1 $\ensuremath{\mu}\mathrm{K}$. After the wave packets have separated by 42 photon recoil momenta, our pulses maintain a fringe contrast of 90%, whereas, for adiabatic rapid passage and conventional $\ensuremath{\pi}$ pulses, the contrast is less than 10%. Furthermore, we show how these pulses may be adapted to be robust to laser intensity variations between pulses and to suppress the detrimental off-resonant excitation that limits other broadband pulse schemes.

DOI
10.1103/physreva.101.063625

Related papers

Optimal control of cold atoms for ultra-precise quantum sensors

Jack Saywell

Atom interferometric sensors can enable extremely precise measurements of inertial motion and external fields by manipulating and interfering atomic states using pulses of laser light. However, like many experiments that require the coherent control of a quantum system, the interaction fidelity is limited by inhomogeneities in the control fields. Variations in atomic velocity and laser intensity lead different atoms to experience different interactions under the same pulse, reducing the interference fringe contrast, introducing bias, and limiting the sensitivity. We present the theoretical design and experimental demonstration of pulses for atom interferometry which compensate inhomogeneities in atomic velocity and laser intensity. By varying the laser phase throughout a pulse and choosing an appropriate fidelity measure to be maximised, pulses are optimised by adapting optimal control techniques originally designed for nuclear magnetic resonance applications. We show using simulations that optimised pulses significantly improve the fidelity of interferometer operations and verify this experimentally using Raman transitions within a cold sample of 85Rb atoms. We demonstrate a robust state-transfer pulse that achieves a fidelity of 99.8(3)% in a ∼ 35 µK sample and obtain a threefold increase in the fringe contrast using a full sequence of optimised pulses. Many of the pulse shapes found by optimal control are simple and symmetrical, and we show that certain symmetries are integral to error compensation. By systematically exploring the dependence of these solutions on the model and optimisation parameters, we demonstrate a stability which underlines the general applicability of optimised pulses to a range of interferometer configurations. Finally, we introduce and computationally analyse a novel theoretical approach to improve the sensitivity of large-momentum-transfer (LMT) interferometers, whereby “biselective” pulses are optimised to track the changing resonance conditions encountered in extended pulse sequences that are designed to increase the measurement sensitivity. When conventional pulses of steady phase are used, the interference contrast decays rapidly as extra pulses are added because of the change in resonance. Using numerical simulations, we show that bi-selective pulses maintain interaction fidelity throughout extended pulse sequences, allowing significant increases in the sensitivity that may be obtained using LMT.

•Dec 1, 2020•1 citation

Large-Area Atom Interferometry with Frequency-Swept Raman Adiabatic Passage

Krish Kotru, David L. Butts, Joseph M. Kinast +1 more

We demonstrate light-pulse atom interferometry with large-momentum-transfer atom optics based on stimulated Raman transitions and frequency-swept adiabatic rapid passage. Our atom optics have produced momentum splittings of up to 30 photon recoil momenta in an acceleration-sensitive interferometer for laser cooled atoms. We experimentally verify the enhancement of phase shift per unit acceleration and characterize interferometer contrast loss. By forgoing evaporative cooling and velocity selection, this method lowers the atom shot-noise-limited measurement uncertainty and enables large-area atom interferometry at higher data rates.

Physical Review Letters•Aug 31, 2015•61 citations

Optimized Raman pulses for atom interferometry

Jack Saywell, Max Carey, Mohammad Belal +2 more

We present mirror and beamsplitter pulse designs that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These designs are demonstrated experimentally with a cold thermal sample of $^{85}$Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional $π$ pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the $π$ pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach-Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional $π$ and $π/2$ pulses.

arXiv:1911.08789•Nov 20, 2019•0 citations

Optimal pulses for enhanced interferometer sensitivity and contrast

Jack Saywell, Max Carey, David Elcock +3 more

The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.

•Sep 20, 2018•0 citations

Counterdiabatic Raman Atom Optics for Compact High-Sensitivity Gravimetry

Asad Ali, Hamid Arian Zad, Saif Al-Kuwari +6 more

Large-momentum-transfer (LMT) atom interferometry provides a route toward enhanced inertial sensitivity in compact quantum sensors, but its scalability is limited by the accumulation of pulse-transfer errors across long Raman pulse sequences. We investigate theoretically the use of stimulated Raman shortcut-to-adiabatic passage (STIRSAP) for high-fidelity LMT atom optics in a Mach--Zehnder interferometer geometry. The counterdiabatic correction is encoded directly into the Raman pulse envelopes, eliminating the need for auxiliary microwave or radio-frequency control fields. Numerical simulations based on an effective Raman model show that $1~μ\mathrm{s}$ STIRSAP pulses achieve single-pulse transfer fidelities of $F_π= 0.99902$ while maintaining negligible pulse-time overhead even at high momentum order. We analyze the resulting tradeoff between interferometric phase enhancement and compound contrast decay and identify an unconstrained shot-noise optimum near $n\approx270$. The analysis further shows that practical operation at extreme LMT order is constrained by wave-packet separation, vibration noise, Doppler detuning, and accumulated systematic effects rather than by pulse duration itself. These results establish superadiabatic Raman control as a promising approach for scalable high-fidelity atom optics and clarify the physical limitations governing compact high-order atom interferometers.

quant-pharXiv:2606.16945•Jun 16, 2026•0 citations

Optimal control of Raman pulse sequences for atom interferometry

Jack Saywell, Max Carey, Mohammad Belal +2 more

Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.

Journal of Physics B Atomic Molecular and Optical Physics•Feb 5, 2020•59 citations
We present designs for the augmentation ``mirror'' pulses of large-momentum-transfer atom interferometers that maintain their fidelity as the wave-packet momentum difference is increased. These biselective pulses, tailored using optimal control methods to the evolving bimodal momentum distribution, should allow greater interferometer areas and hence increased inertial measurement sensitivity, without requiring elevated Rabi frequencies or extended frequency chirps. Using an experimentally validated model, we have simulated the application of our pulse designs to large-momentum-transfer atom interferometry using stimulated Raman transitions in a laser-cooled atomic sample of 85Rb^{85}\mathrm{Rb}85Rb at 1 \ensuremathμK\ensuremath{\mu}\mathrm{K}\ensuremathμK. After the wave packets have separated by 42 photon recoil momenta, our pulses maintain a fringe contrast of 90%, whereas, for adiabatic rapid passage and conventional \ensuremathπ\ensuremath{\pi}\ensuremathπ pulses, the contrast is less than 10%. Furthermore, we show how these pulses may be adapted to be robust to laser intensity variations between pulses and to suppress the detrimental off-resonant excitation that limits other broadband pulse schemes.
Atom interferometric sensors can enable extremely precise measurements of inertial motion and external fields by manipulating and interfering atomic states using pulses of laser light. However, like many experiments that require the coherent control of a quantum system, the interaction fidelity is limited by inhomogeneities in the control fields. Variations in atomic velocity and laser intensity lead different atoms to experience different interactions under the same pulse, reducing the interference fringe contrast, introducing bias, and limiting the sensitivity. We present the theoretical design and experimental demonstration of pulses for atom interferometry which compensate inhomogeneities in atomic velocity and laser intensity. By varying the laser phase throughout a pulse and choosing an appropriate fidelity measure to be maximised, pulses are optimised by adapting optimal control techniques originally designed for nuclear magnetic resonance applications. We show using simulations that optimised pulses significantly improve the fidelity of interferometer operations and verify this experimentally using Raman transitions within a cold sample of 85Rb atoms. We demonstrate a robust state-transfer pulse that achieves a fidelity of 99.8(3)% in a ∼ 35 µK sample and obtain a threefold increase in the fringe contrast using a full sequence of optimised pulses. Many of the pulse shapes found by optimal control are simple and symmetrical, and we show that certain symmetries are integral to error compensation. By systematically exploring the dependence of these solutions on the model and optimisation parameters, we demonstrate a stability which underlines the general applicability of optimised pulses to a range of interferometer configurations. Finally, we introduce and computationally analyse a novel theoretical approach to improve the sensitivity of large-momentum-transfer (LMT) interferometers, whereby “biselective” pulses are optimised to track the changing resonance conditions encountered in extended pulse sequences that are designed to increase the measurement sensitivity. When conventional pulses of steady phase are used, the interference contrast decays rapidly as extra pulses are added because of the change in resonance. Using numerical simulations, we show that bi-selective pulses maintain interaction fidelity throughout extended pulse sequences, allowing significant increases in the sensitivity that may be obtained using LMT.
We demonstrate light-pulse atom interferometry with large-momentum-transfer atom optics based on stimulated Raman transitions and frequency-swept adiabatic rapid passage. Our atom optics have produced momentum splittings of up to 30 photon recoil momenta in an acceleration-sensitive interferometer for laser cooled atoms. We experimentally verify the enhancement of phase shift per unit acceleration and characterize interferometer contrast loss. By forgoing evaporative cooling and velocity selection, this method lowers the atom shot-noise-limited measurement uncertainty and enables large-area atom interferometry at higher data rates.
We present mirror and beamsplitter pulse designs that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These designs are demonstrated experimentally with a cold thermal sample of 85^{85}85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional πππ pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the πππ pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach-Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional πππ and π/2π/2π/2 pulses.
The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.
Large-momentum-transfer (LMT) atom interferometry provides a route toward enhanced inertial sensitivity in compact quantum sensors, but its scalability is limited by the accumulation of pulse-transfer errors across long Raman pulse sequences. We investigate theoretically the use of stimulated Raman shortcut-to-adiabatic passage (STIRSAP) for high-fidelity LMT atom optics in a Mach--Zehnder interferometer geometry. The counterdiabatic correction is encoded directly into the Raman pulse envelopes, eliminating the need for auxiliary microwave or radio-frequency control fields. Numerical simulations based on an effective Raman model show that 1 μs1~μ\mathrm{s}1 μs STIRSAP pulses achieve single-pulse transfer fidelities of Fπ=0.99902F_π= 0.99902Fπ​=0.99902 while maintaining negligible pulse-time overhead even at high momentum order. We analyze the resulting tradeoff between interferometric phase enhancement and compound contrast decay and identify an unconstrained shot-noise optimum near n≈270n\approx270n≈270. The analysis further shows that practical operation at extreme LMT order is constrained by wave-packet separation, vibration noise, Doppler detuning, and accumulated systematic effects rather than by pulse duration itself. These results establish superadiabatic Raman control as a promising approach for scalable high-fidelity atom optics and clarify the physical limitations governing compact high-order atom interferometers.
Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.