Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optimal pulses for enhanced interferometer sensitivity and contrast

Jack Saywell, Max Carey, David Elcock, Mohammad Belal, Ilya Kuprov, Tim Freegarde

Published Sep 20, 2018• 0 citations
OpenAlex

Abstract

The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.

Related papers

Optimal control of cold atoms for ultra-precise quantum sensors

Jack Saywell

Atom interferometric sensors can enable extremely precise measurements of inertial motion and external fields by manipulating and interfering atomic states using pulses of laser light. However, like many experiments that require the coherent control of a quantum system, the interaction fidelity is limited by inhomogeneities in the control fields. Variations in atomic velocity and laser intensity lead different atoms to experience different interactions under the same pulse, reducing the interference fringe contrast, introducing bias, and limiting the sensitivity. We present the theoretical design and experimental demonstration of pulses for atom interferometry which compensate inhomogeneities in atomic velocity and laser intensity. By varying the laser phase throughout a pulse and choosing an appropriate fidelity measure to be maximised, pulses are optimised by adapting optimal control techniques originally designed for nuclear magnetic resonance applications. We show using simulations that optimised pulses significantly improve the fidelity of interferometer operations and verify this experimentally using Raman transitions within a cold sample of 85Rb atoms. We demonstrate a robust state-transfer pulse that achieves a fidelity of 99.8(3)% in a ∼ 35 µK sample and obtain a threefold increase in the fringe contrast using a full sequence of optimised pulses. Many of the pulse shapes found by optimal control are simple and symmetrical, and we show that certain symmetries are integral to error compensation. By systematically exploring the dependence of these solutions on the model and optimisation parameters, we demonstrate a stability which underlines the general applicability of optimised pulses to a range of interferometer configurations. Finally, we introduce and computationally analyse a novel theoretical approach to improve the sensitivity of large-momentum-transfer (LMT) interferometers, whereby “biselective” pulses are optimised to track the changing resonance conditions encountered in extended pulse sequences that are designed to increase the measurement sensitivity. When conventional pulses of steady phase are used, the interference contrast decays rapidly as extra pulses are added because of the change in resonance. Using numerical simulations, we show that bi-selective pulses maintain interaction fidelity throughout extended pulse sequences, allowing significant increases in the sensitivity that may be obtained using LMT.

•Dec 1, 2020•1 citation

Optimal control of mirror pulses for cold-atom interferometry

Jack Saywell, Ilya Kuprov, David L. Goodwin +2 more

Atom matterwave interferometry requires mirror and beam splitter pulses that are robust to inhomogeneities in field intensity, magnetic environment, atom velocity, and Zeeman substate. We present theoretical results which show that pulse shapes determined using quantum control methods can significantly improve interferometer performance by allowing broader atom distributions, larger interferometer areas, and higher contrast. We have applied gradient ascent pulse engineering (grape) to optimize the design of phase-modulated mirror pulses for a Mach-Zehnder light-pulse atom interferometer, with the aim of increasing fringe contrast when averaged over atoms with an experimentally relevant range of velocities, beam intensities, and Zeeman states. Pulses were found to be highly robust to variations in detuning and coupling strength and offer a clear improvement in robustness over the best established composite pulses. The peak mirror fidelity in a cloud of $\ensuremath{\sim}80\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{K}\phantom{\rule{4pt}{0ex}}^{85}\mathrm{Rb}$ atoms is predicted to be improved by a factor of 2 compared with standard rectangular $\ensuremath{\pi}$ pulses.

arXiv:1804.04625•Physical Review A•Aug 22, 2018•46 citations

Can optimised pulses improve the sensitivity of atom interferometers?

Jack Saywell, Max Carey, Nikolaos Dedes +2 more

The sensitivity of atom interferometers depends on the fidelity of the light pulses used as beamsplitters and mirrors. Atom interferometers typically employ pulses that affect π/2 and π fractional Rabi oscillations, the fidelities of which are reduced when there are variations in atomic velocity and laser intensity. We have previously demonstrated the application of optimal control theory to design pulses more robust to such errors; however, if these variations exhibit a time dependence over periods on the order of the interferometer duration then phase shifts can be introduced in the final fringe that potentially reduce the sensitivity. In this paper, we explain why care must be taken when optimising interferometer pulse sequences to ensure that phase shifts arising from inter-pulse variations are not significantly increased. We show that these phase shifts can in fact be minimised by choosing an appropriate measure of individual pulse fidelity.

Quantum Technology: Driving Commercialisation of an Enabling Science•Oct 6, 2021•1 citation

Optimal control of Raman pulse sequences for atom interferometry

Jack Saywell, Max Carey, Mohammad Belal +2 more

Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.

Journal of Physics B Atomic Molecular and Optical Physics•Feb 5, 2020•59 citations

Efficient state-symmetric beamsplitters and mirrors for atom interferometers using optimized pulses

Jack Saywell, Max Carey, Nikolaos Dedes +2 more

Abstract Atom interferometers that employ atoms in superpositions of different electronic states are sensitive to any noise that affects these superposed states differently. Resilience to such noise results from using superpositions where the atomic states differ in momentum only, but implementation of such ‘state-symmetric’ diffraction can lead to population loss into unwanted states and restricts the atomic velocity acceptance of the interferometer. In this paper, by varying the laser intensities and phases as functions of time, we present optimized pulses designed for use in state-symmetric interferometers that overcome these restrictions. We extend this optimization to multi-pulse sequences designed to increase the interferometer area and demonstrate significant improvements in the fringe visibility compared with sequences of π/2 and π pulses. We discuss the limits on the temperature of the atomic source required for efficient atomic diffraction and show how optimized pulse sequences enable efficient diffraction with considerably warmer clouds, hence reducing the need for velocity selection and increasing the measurement signal-to-noise ratio.

Journal of Physics B Atomic Molecular and Optical Physics•Aug 25, 2022•3 citations

Optimized Slice-Phase Control of Mirror Pulse in Cold-Atom Interferometry with Finite Response Time

Xueting Fang, Doudou Wang, Kun Yuan +6 more

Atom interferometers require both high efficiency and robust performance in their mirror pulses under experimental inhomogeneities. In this work, we demonstrated that quantum optimal control designed mirror pulse significantly enhance interferometer performance by using novel adaptive sliced structure. Using gradient ascent pulse engineering (GRAPE), optimized mirror pulse for a Mach-Zehnder light-pulse atom interferometer was designed by discretizing the control into non-uniform phase slices. This design broadened the tolerence to experimentally relevant variations in detuning $[-Ω_0,Ω_0]$ and Rabi frequency $[0.1\timesΩ_0,1.9\timesΩ_0]$ ($Ω_0=2π\times25$ kHz), while maintaining high transfer efficiency even when the response-time delays up to 1.6 $\rm{μs}$. The optimized pulse was found to be robust to coupling inhomogeneity and velocity spread, offering a significant improvement in robustness over conventional pulse. The adaptive pulse slicing method provides a minimalist strategy that reduces experimental complexity while enhancing robustness and scalability, offering an innovative scheme for quantum optimal control in high precision atom interferometry.

quant-pharXiv:2601.15586•Physical Review A•Jan 23, 2026•0 citations
The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.
Atom interferometric sensors can enable extremely precise measurements of inertial motion and external fields by manipulating and interfering atomic states using pulses of laser light. However, like many experiments that require the coherent control of a quantum system, the interaction fidelity is limited by inhomogeneities in the control fields. Variations in atomic velocity and laser intensity lead different atoms to experience different interactions under the same pulse, reducing the interference fringe contrast, introducing bias, and limiting the sensitivity. We present the theoretical design and experimental demonstration of pulses for atom interferometry which compensate inhomogeneities in atomic velocity and laser intensity. By varying the laser phase throughout a pulse and choosing an appropriate fidelity measure to be maximised, pulses are optimised by adapting optimal control techniques originally designed for nuclear magnetic resonance applications. We show using simulations that optimised pulses significantly improve the fidelity of interferometer operations and verify this experimentally using Raman transitions within a cold sample of 85Rb atoms. We demonstrate a robust state-transfer pulse that achieves a fidelity of 99.8(3)% in a ∼ 35 µK sample and obtain a threefold increase in the fringe contrast using a full sequence of optimised pulses. Many of the pulse shapes found by optimal control are simple and symmetrical, and we show that certain symmetries are integral to error compensation. By systematically exploring the dependence of these solutions on the model and optimisation parameters, we demonstrate a stability which underlines the general applicability of optimised pulses to a range of interferometer configurations. Finally, we introduce and computationally analyse a novel theoretical approach to improve the sensitivity of large-momentum-transfer (LMT) interferometers, whereby “biselective” pulses are optimised to track the changing resonance conditions encountered in extended pulse sequences that are designed to increase the measurement sensitivity. When conventional pulses of steady phase are used, the interference contrast decays rapidly as extra pulses are added because of the change in resonance. Using numerical simulations, we show that bi-selective pulses maintain interaction fidelity throughout extended pulse sequences, allowing significant increases in the sensitivity that may be obtained using LMT.
Atom matterwave interferometry requires mirror and beam splitter pulses that are robust to inhomogeneities in field intensity, magnetic environment, atom velocity, and Zeeman substate. We present theoretical results which show that pulse shapes determined using quantum control methods can significantly improve interferometer performance by allowing broader atom distributions, larger interferometer areas, and higher contrast. We have applied gradient ascent pulse engineering (grape) to optimize the design of phase-modulated mirror pulses for a Mach-Zehnder light-pulse atom interferometer, with the aim of increasing fringe contrast when averaged over atoms with an experimentally relevant range of velocities, beam intensities, and Zeeman states. Pulses were found to be highly robust to variations in detuning and coupling strength and offer a clear improvement in robustness over the best established composite pulses. The peak mirror fidelity in a cloud of $\ensuremath{\sim}80\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{K}\phantom{\rule{4pt}{0ex}}^{85}\mathrm{Rb}$ atoms is predicted to be improved by a factor of 2 compared with standard rectangular $\ensuremath{\pi}$ pulses.
The sensitivity of atom interferometers depends on the fidelity of the light pulses used as beamsplitters and mirrors. Atom interferometers typically employ pulses that affect π/2 and π fractional Rabi oscillations, the fidelities of which are reduced when there are variations in atomic velocity and laser intensity. We have previously demonstrated the application of optimal control theory to design pulses more robust to such errors; however, if these variations exhibit a time dependence over periods on the order of the interferometer duration then phase shifts can be introduced in the final fringe that potentially reduce the sensitivity. In this paper, we explain why care must be taken when optimising interferometer pulse sequences to ensure that phase shifts arising from inter-pulse variations are not significantly increased. We show that these phase shifts can in fact be minimised by choosing an appropriate measure of individual pulse fidelity.
Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.
Abstract Atom interferometers that employ atoms in superpositions of different electronic states are sensitive to any noise that affects these superposed states differently. Resilience to such noise results from using superpositions where the atomic states differ in momentum only, but implementation of such ‘state-symmetric’ diffraction can lead to population loss into unwanted states and restricts the atomic velocity acceptance of the interferometer. In this paper, by varying the laser intensities and phases as functions of time, we present optimized pulses designed for use in state-symmetric interferometers that overcome these restrictions. We extend this optimization to multi-pulse sequences designed to increase the interferometer area and demonstrate significant improvements in the fringe visibility compared with sequences of π/2 and π pulses. We discuss the limits on the temperature of the atomic source required for efficient atomic diffraction and show how optimized pulse sequences enable efficient diffraction with considerably warmer clouds, hence reducing the need for velocity selection and increasing the measurement signal-to-noise ratio.
Atom interferometers require both high efficiency and robust performance in their mirror pulses under experimental inhomogeneities. In this work, we demonstrated that quantum optimal control designed mirror pulse significantly enhance interferometer performance by using novel adaptive sliced structure. Using gradient ascent pulse engineering (GRAPE), optimized mirror pulse for a Mach-Zehnder light-pulse atom interferometer was designed by discretizing the control into non-uniform phase slices. This design broadened the tolerence to experimentally relevant variations in detuning [−Ω0,Ω0][-Ω_0,Ω_0][−Ω0​,Ω0​] and Rabi frequency [0.1×Ω0,1.9×Ω0][0.1\timesΩ_0,1.9\timesΩ_0][0.1×Ω0​,1.9×Ω0​] (Ω0=2π×25Ω_0=2π\times25Ω0​=2π×25 kHz), while maintaining high transfer efficiency even when the response-time delays up to 1.6 μs\rm{μs}μs. The optimized pulse was found to be robust to coupling inhomogeneity and velocity spread, offering a significant improvement in robustness over conventional pulse. The adaptive pulse slicing method provides a minimalist strategy that reduces experimental complexity while enhancing robustness and scalability, offering an innovative scheme for quantum optimal control in high precision atom interferometry.