Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2003.11068 · Physical Review Applied

Fast Tunable High- Q -Factor Superconducting Microwave Resonators

Sumedh Mahashabde, Ernst Otto, Domenico Montemurro, Sebastian de Graaf, Sergey Kubatkin, Andrey Danilov

Published Oct 21, 2020• 63 citations
arXivHTMLPDF

Abstract

We present fast tunable superconducting microwave resonators fabricated from planar $\mathrm{Nb}\mathrm{N}$ on a sapphire substrate. The $3\ensuremath{\lambda}/4$ wavelength resonators are tuning fork shaped and tuned by passing a dc current that controls the kinetic inductance of the tuning fork prongs. The $\ensuremath{\lambda}/4$ section from the open end operates as an integrated impedance converter that creates a nearly perfect short for microwave currents at the dc terminal coupling points, thus preventing microwave energy leakage through the dc lines. We measure an internal quality factor ${Q}_{\mathrm{int}}>{10}^{5}$ over the entire tuning range. We demonstrate a tuning range of greater than $3\mathrm{%}$ and tuning response times as short as 20 ns for the maximum achievable detuning. Because of the quasifractal design, the resonators are resilient to magnetic fields of up to 0.5 T.

DOI
10.1103/physrevapplied.14.044040

Related papers

Tunable superconducting transmissionline resonator for qubit coupling

Martin Sandberg

In this licentiate thesis design, fabrication, and measurements of tunable superconducting microwave transmission line resonators are described. The resonators are of quarter wavelength type were the tuning is achieved by changing one of the boundary conditions of the resonator through a tunable impedance. As tunable impedance the Josephson inductance in form of SQUIDs is used. The Josephson inductance can then be tuned by applying a magnetic field to the SQUID loop. A tuning range of 750 MHz for a 5 GHz resonator is achieved, and as a figure of merit it can be tuned over 200 line widths. The purpose of the tunable resonators is to use them for dynamic coupling of superconducting quantum bits, this requires that the resonators can be tuned fast on the timescale of the resonator-qubit coupling. To measure tuning speeds faster then the ring up time of the resonators a method that measures the leakage of energy out of a detuned resonator was developed. With this method a frequency shift of the energy stored in the resonator can be measured. A detuning of 330 MHz in less than 10 ns is demonstrated for a 4.5 GHz resonator with a quality factor of 10$^4$. Working in the few photon limit indicates that the devices can be used to change the frequency of individual photons, this is however still to be demonstrated. As a part of this work the dressed states of a superconducting charge qubit was also studied.

•Jan 1, 2008•0 citations

Frequency-tunable high-Q superconducting resonators via wireless control of nonlinear kinetic inductance

Mingrui Xu, Xu Han, Wei Fu +2 more

Frequency-tunable microwave resonators are in great demand especially in hybrid systems where precise frequency alignment of resonances is required. Here, we present frequency-tunable high-Q superconducting resonators fabricated from thin niobium nitride and niobium titanium nitride films. The resonant frequency is tuned by applying a magnetic field perpendicular to the hole structures in the resonator's inductor wire, whose kinetic inductance is modified by wirelessly induced DC supercurrents. A continuous in situ frequency tuning of over 300 MHz is achieved for a 10 GHz resonator with a moderate magnetic field of 1.2 mT. The planar resonator design and the noncontact tuning scheme greatly ease the fabrication complexity and can be widely applied in many hybrid systems for coupling microwave modes with other forms of excitations such as optical photons, phonons, magnons, and spins.

Applied Physics Letters•May 13, 2019•61 citations

Frequency-tunable superconducting resonators via nonlinear kinetic inductance

Michael R. Vissers, Johannes Hubmayr, Martin Sandberg +3 more

We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.

arXiv:1507.05126•Applied Physics Letters•Aug 10, 2015•93 citations

A tunable coupler for superconducting microwave resonators using a nonlinear kinetic inductance transmission line

Clint Bockstiegel, Yiwen Wang, Michael R. Vissers +4 more

We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.

Applied Physics Letters•May 30, 2016•25 citations

Tuning the field in a microwave resonator faster than the photon lifetime

Martin Sandberg, Christopher M. Wilson, Fredrik Persson +5 more

We have fabricated and characterized tunable superconducting transmission line resonators. To change the resonance frequency, we modify the boundary condition at one end of the resonator through the tunable Josephson inductance of a superconducting quantum interference device. We demonstrate a large tuning range (several hundred megahertz), high quality factors (104), and that we can change the frequency of a few-photon field on a time scale orders of magnitude faster than the photon lifetime of the resonator. This demonstration has implications in a variety of applications.

Applied Physics Letters•May 19, 2008•280 citations

Compact NbN resonators with high kinetic inductance*

Xingyu Wei, Jiazheng Pan, Yapeng Lu +13 more

We design and fabricate λ/2 coplanar waveguide NbN resonators, the thickness and length of which are only several nanometers and hundred microns, respectively. The quality factor of such compact resonators can reach up to 7.5 × 104 at single photon power level at 30 mK with the resonance frequency around 6.835 GHz. In order to tune the resonant frequency, the resonator is terminated to the ground with a dc-SQUID. By tuning the magnetic flux in the dc-SQUID, the effective inductance of the dc-SQUID is varied, which leads to the change in the resonant frequency of the resonator. The tunability range is more than 30 MHz and the quality factor is about 3 × 103. These compact and tunable NbN resonators have potential applications in the quantum information processing, such as in the precision measurement, coupling and/or reading out the quantum states of qubits.

Chinese Physics B•Oct 20, 2020•9 citations
We present fast tunable superconducting microwave resonators fabricated from planar NbN\mathrm{Nb}\mathrm{N}NbN on a sapphire substrate. The 3\ensuremathλ/43\ensuremath{\lambda}/43\ensuremathλ/4 wavelength resonators are tuning fork shaped and tuned by passing a dc current that controls the kinetic inductance of the tuning fork prongs. The \ensuremathλ/4\ensuremath{\lambda}/4\ensuremathλ/4 section from the open end operates as an integrated impedance converter that creates a nearly perfect short for microwave currents at the dc terminal coupling points, thus preventing microwave energy leakage through the dc lines. We measure an internal quality factor Qint>105{Q}_{\mathrm{int}}>{10}^{5}Qint​>105 over the entire tuning range. We demonstrate a tuning range of greater than 3\mathrm{%} and tuning response times as short as 20 ns for the maximum achievable detuning. Because of the quasifractal design, the resonators are resilient to magnetic fields of up to 0.5 T.
In this licentiate thesis design, fabrication, and measurements of tunable superconducting microwave transmission line resonators are described. The resonators are of quarter wavelength type were the tuning is achieved by changing one of the boundary conditions of the resonator through a tunable impedance. As tunable impedance the Josephson inductance in form of SQUIDs is used. The Josephson inductance can then be tuned by applying a magnetic field to the SQUID loop. A tuning range of 750 MHz for a 5 GHz resonator is achieved, and as a figure of merit it can be tuned over 200 line widths. The purpose of the tunable resonators is to use them for dynamic coupling of superconducting quantum bits, this requires that the resonators can be tuned fast on the timescale of the resonator-qubit coupling. To measure tuning speeds faster then the ring up time of the resonators a method that measures the leakage of energy out of a detuned resonator was developed. With this method a frequency shift of the energy stored in the resonator can be measured. A detuning of 330 MHz in less than 10 ns is demonstrated for a 4.5 GHz resonator with a quality factor of 104^44. Working in the few photon limit indicates that the devices can be used to change the frequency of individual photons, this is however still to be demonstrated. As a part of this work the dressed states of a superconducting charge qubit was also studied.
Frequency-tunable microwave resonators are in great demand especially in hybrid systems where precise frequency alignment of resonances is required. Here, we present frequency-tunable high-Q superconducting resonators fabricated from thin niobium nitride and niobium titanium nitride films. The resonant frequency is tuned by applying a magnetic field perpendicular to the hole structures in the resonator's inductor wire, whose kinetic inductance is modified by wirelessly induced DC supercurrents. A continuous in situ frequency tuning of over 300 MHz is achieved for a 10 GHz resonator with a moderate magnetic field of 1.2 mT. The planar resonator design and the noncontact tuning scheme greatly ease the fabrication complexity and can be widely applied in many hybrid systems for coupling microwave modes with other forms of excitations such as optical photons, phonons, magnons, and spins.
We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.
We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.
We have fabricated and characterized tunable superconducting transmission line resonators. To change the resonance frequency, we modify the boundary condition at one end of the resonator through the tunable Josephson inductance of a superconducting quantum interference device. We demonstrate a large tuning range (several hundred megahertz), high quality factors (104), and that we can change the frequency of a few-photon field on a time scale orders of magnitude faster than the photon lifetime of the resonator. This demonstration has implications in a variety of applications.
We design and fabricate λ/2 coplanar waveguide NbN resonators, the thickness and length of which are only several nanometers and hundred microns, respectively. The quality factor of such compact resonators can reach up to 7.5 × 104 at single photon power level at 30 mK with the resonance frequency around 6.835 GHz. In order to tune the resonant frequency, the resonator is terminated to the ground with a dc-SQUID. By tuning the magnetic flux in the dc-SQUID, the effective inductance of the dc-SQUID is varied, which leads to the change in the resonant frequency of the resonator. The tunability range is more than 30 MHz and the quality factor is about 3 × 103. These compact and tunable NbN resonators have potential applications in the quantum information processing, such as in the precision measurement, coupling and/or reading out the quantum states of qubits.