We study the dispersive readout of a qubit in the ultimate limit of a single-photon probe. The use of a single-photon probe avoids the errors due to nonorthogonality of coherent states. A photodetector is used in the scheme we consider. The dynamics of the system is studied using the Heisenberg-Langevin equations. We treat the counter-rotating terms in the Hamiltonian perturbatively, which leads to the Bloch-Siegert shift in the resonator frequency. It is shown how the shift can improve the readout. The theory of photon transport through the qubit and the resonator it couples to is provided while taking the effect of the counter-rotating terms into account. To calculate the readout contrast, we use two approaches. The first one neglects the qubit relaxation and allows us to derive a compact expression for the contrast. Also, we obtain simple estimates for the system parameters to maximize the contrast. The second approach accounts for the qubit relaxation, which allows us to further improve the contrast. We demonstrate that for a readout time of $1\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{s}$, a contrast of more than 75% can be achieved for an ideal detector and single-photon source.
We study the dispersive readout of a qubit in the ultimate limit of a single-photon probe. The use of a single-photon probe avoids the errors due to nonorthogonality of coherent states. A photodetector is used in the scheme we consider. The dynamics of the system is studied using the Heisenberg-Langevin equations. We treat the counter-rotating terms in the Hamiltonian perturbatively, which leads to the Bloch-Siegert shift in the resonator frequency. It is shown how the shift can improve the readout. The theory of photon transport through the qubit and the resonator it couples to is provided while taking the effect of the counter-rotating terms into account. To calculate the readout contrast, we use two approaches. The first one neglects the qubit relaxation and allows us to derive a compact expression for the contrast. Also, we obtain simple estimates for the system parameters to maximize the contrast. The second approach accounts for the qubit relaxation, which allows us to further improve the contrast. We demonstrate that for a readout time of 1\ensuremathμs, a contrast of more than 75% can be achieved for an ideal detector and single-photon source.
We determine the optimal parameters for a simple and efficient scheme of dispersive readout of a qubit. Depending on the qubit state (ground or excited), the resonance of a cavity is shifted either to the red or to the blue side. Qubit state is inferred by detecting the photon number transmitted through the cavity. It turns out that this kind of detection provides better measurement fidelity than the detection of the presence or absence of photons only. We show that radiating the cavity on either of the frequencies it shifts to results in a suboptimal measurement. The optimal frequency of the probe photons is determined, as well as the optimal ratio of the shift to the resonator leakage. It is shown that to maximize the fidelity of a long-lasting measurement, it is sufficient to use the parameters optimizing the signal-to-noise ratio in the photon count. One can reach 99% fidelity for a single-shot measurement in various physical realizations of the scheme.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.
Robust high-fidelity parity measurement is an important operation in many applications of quantum computing. In this work we show how in a circuit QED architecture, one can measure parity in a single shot at very high contrast by taking advantage of the nonlinear behavior of a strongly driven microwave cavity coupled to one or multiple qubits. We work in a nonlinear dispersive regime treated in an exact dispersive transformation. We show that appropriate tuning of experimental parameters leads to very high contrast in the cavity and therefore to a high-efficiency parity readout with a microwave photon counter or another amplitude detector. These tuning conditions are based on nonlinearity and are hence more robust than previously described linear tuning schemes. In the first part of the paper we show in detail how to achieve this for two-qubit parity measurements and extend this to N qubits in the second part of the paper. We also study the quantum nondemolition character of the protocol.
We analyze a readout scheme for Majorana qubits based on dispersive coupling to a resonator.We consider two variants of Majorana qubits: the Majorana transmon and the Majorana box qubit.In both cases, the qubit-resonator interaction can produce sizeable dispersive shifts in the megahertz range for reasonable system parameters, allowing for submicrosecond readout with high fidelity.For Majorana transmons, the light-matter interaction used for readout manifestly conserves Majorana parity, which leads to a notion of quantum nondemolition (QND) readout that is stronger than for conventional charge qubits.In contrast, Majorana box qubits only recover an approximately QND readout mechanism in the dispersive limit where the resonator detuning is large.We also compare dispersive readout to longitudinal readout for the Majorana box qubit.We show that the latter gives faster and higher fidelity readout for reasonable parameters, while having the additional advantage of being manifestly QND, and so may prove to be a better readout mechanism for these systems.
Single-qubit quantum gates are implemented as the time-controlled unitary evolution of a two-level system under harmonic driving. The rotating-wave approximation (RWA) provides closed-form gate parameters for weak coupling. Larger amplitudes, desirable to speed up the dynamics, make the RWA-designed gates inaccurate because of the neglected counter-rotating term, which also shifts the resonance (Bloch-Siegert shift). Here we study theoretically the infidelity of gates beyond the RWA, using the effective Magnus-Taylor Hamiltonian through second order in the inverse of the driving frequency. By detuning the driving frequency by an amplitude-dependent shift of Bloch-Siegert type and rescaling the operation time, the RWA gate conditions are recovered with corrected parameters. Numerical solutions of the Schrodinger equation show that these corrections lower the gate infidelity by several orders of magnitude, extending the range of usable amplitudes
Spectral properties of a quantum circuit are efficiently read out by monitoring the resonance frequency shift it induces in a microwave resonator coupled to it. When the two systems are strongly detuned, theory attributes the shift to an effective resonator capacitance or inductance that depends on the quantum circuit state. At small detuning, the shift arises from the exchange of virtual photons, as described by the Jaynes-Cummings model. Here we present a theory bridging these two limits and illustrate, with several examples, its necessity for a general description of quantum circuits readout. Circuit Quantum Electrodynamics (cQED) is at the heart of most advanced superconducting quantum technologies. Different types of superconducting qubits can be strongly coupled to microwave resonators thus achieving regimes and phenomenena which cannot be reached within the realm of quantum optics [1]. More recently, strong coupling between microwave resonators and a variety of other quantum systems not necessarily involving superconductors has been achieved [2], extending further the realm of cQED. In all these applications the measurement of the qubit or the hybrid device state is achieved by monitoring the resonator properties. Theoretically , two regimes have been approached using disconnected descriptions [3]: the dispersive regime, where the qubit-resonator detuning is larger than the coupling strength yet small enough to allow the exchange of virtual photons, and the adiabatic regime, where the de-tuning is sufficiently large for virtual processes to be strongly suppressed. The dispersive regime, which describes level repulsion between those of the quantum circuit and of the resonator, is typically dealt with using a Jaynes-Cummings Hamiltonian within different levels of approximation [3-10]. In contrast, the adiabatic regime accounts for the renormalization of the resonator capaci-tance/inductance by the effective capacitance of the circuit , including its "quantum capacitance" [11, 12], or its effective inductance [13, 14], which modifies the resonator frequency [15, 16]. However, there is no actual border between these two regimes which could justify a separate treatment, as illustrated by recent experiments on hybrid cQED setups [17] that reveal features of both regimes for the same device. This situation claims for a unified description of quantum circuits readout, going beyond the standard Jaynes-Cummings model, which could be applied to different types of devices over a large range of parameters. * Corresponding author : a.l.yeyati@uam.es In the present Letter we derive a general expression for the resonator frequency shift when coupled to a generic quantum circuit. This expression naturally interpolates between the adiabatic and the dispersive regimes, thus allowing to clarify their origin from the same coupling Hamiltonian. In addition our formalism is not restricted to the usual two-level approximations but any multilevel situation can be described on the same footing. We illustrate the importance of the different terms in our expression by analyzing well-known models like a short single channel superconducting weak link hosting Andreev states, the RF-SQUID and the Cooper pair box. Resonator-quantum circuit coupling.-The system we consider comprises a resonant circuit and a quantum circuit coupled through phase or charge fluctuations as depicted in Figs. 1(a), 2(a) and in the inset of Fig. 3. The resonant circuit is represented as a lumped-element LC resonator with bare resonance frequency f r = ω r /2π, with ω r = 1/ √ L r C r. Introducing the photon annihilation (creation) operators a (a †), it can be described by the Hamiltonian H r = ω r a † a. On the other hand, the quantum circuit Hamiltonian,Ĥ qc (x), depends on a dimensionless control parameter x, corresponding to an excess charge on a capacitor or a flux through a loop. We denote by |Φ i (x) the eigenstates of the uncoupled quantum circuit,Ĥ qc (x)|Φ i (x) = E i (x)|Φ i (x). Flux (charge) fluctuations in the resonator lead to x → x 0 +x r , wherex r = λ(s a + s * a †) with a coupling constant λ, depending on a coupling scheme [19], and s = 1 (−i). We assume λ 1 in accordance with experiments. The resonator-quantum circuit coupling HamiltonianĤ c is obtained by expandingĤ qc (x 0 +x r) up to second order inx rĤ c (x 0) =x rĤ qc (x 0) +x 2 r 2Ĥ qc (x 0), (1) where the prime stands for the derivative with respect to x. The Hamiltonian describing resonator, quantum