Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1905.10225 · npj Quantum Information

Synthesizing multi-phonon quantum superposition states using flux-mediated three-body interactions with superconducting qubits

Marios Kounalakis, Yaroslav M. Blanter, Gary Alexander Steele

Published Nov 21, 2019• 19 citations
arXivHTMLPDF

Abstract

Abstract Massive mechanical resonators operating at the quantum scale can enable a large variety of applications in quantum technologies as well as fundamental tests of quantum theory. Of crucial importance in that direction is both their integrability into state-of-the-art quantum platforms as well as the ability to prepare them in generic quantum states using well-controlled high-fidelity operations. Here, we propose a scheme for controlling a radio-frequency mechanical resonator at the quantum scale using two superconducting transmon qubits that can be integrated on the same chip. Specifically, we consider two qubits coupled via a capacitor in parallel to a superconducting quantum interference device (SQUID), which has a suspended mechanical beam embedded in one of its arms. Following a theoretical analysis of the quantum system, we find that this configuration, in combination with an in-plane magnetic field, can give rise to a tuneable three-body interaction in the single-photon strong-coupling regime, while enabling suppression of the stray qubit-qubit coupling. Using state-of-the-art parameters and qubit operations at single-excitation levels, we numerically demonstrate the possibility of ground-state cooling as well as high-fidelity preparation of mechanical quantum states and qubit-phonon entanglement, i.e. states having negative Wigner functions and obeying non-classical correlations. Our work significantly extends the quantum control toolbox of radio-frequency mechanical resonators and may serve as a promising architecture for integrating such mechanical elements with transmon-based quantum processors.

DOI
10.1038/s41534-019-0219-y

Related papers

Nonlinear couplings for quantum control of superconducting qubits and electrical/mechanical resonators

Marios Kounalakis

This thesis explores nonlinear couplings in superconducting circuits with the purpose of achieving quantum control over the elementary excitations of light and motion. It consists mainly of three research themes. The first theme concerns the experimental realisation of a tuneable coupling scheme, giving rise to different interactions with adjustable ratios, between two transmon qubits. The tuneable capabilities of the device together with its versatile geometry and high coherence make it an interesting building block for analog quantum simulators of certain classes of complex problems. The second theme concerns two theoretical proposals for controlling mechanical resonators using transmon qubits. In the first part we analyse an electromechanical circuit architecture giving rise to tuneable three-body interactions between two qubits and a mechanical beam. Several protocols are performed numerically demonstrating ground-state cooling and the creation of mechanical quantum states, such as single-phonon and multi-phonon superposition states as well as qubit-phonon entanglement. Additionally, schemes for generating arbitrary quantum states are explored. The second part relies on the same concept for coupling a mechanical resonator to a transmon qubit and explores the qubit-resonator system in the ultrastrong coupling regime, where the optomechanical coupling approaches or even exceeds the mechanical frequency. We find that for certain coupling strengths ground-state cooling is possible and devise a protocol for generating macroscopic quantum superposition states, known as “Shrödinger cats”, on the mechanical resonator. Finally, the third research theme presented in the thesis concerns an experiment where a cold superconducting qubit is employed to readout and control a thermally populated radio-frequency resonator coupled via a strong dispersive coupling. By means of reservoir engineering, ground-state cooling as well as stabilisation of Fock states in the resonator are demonstrated reaching a new operating regime for circuit quantum electrodynamics.

•Nov 29, 2019•0 citations

Large flux-mediated coupling in hybrid electromechanical system with a transmon qubit

Tanmoy Bera, Sourav Majumder, Sudhir Kumar Sahu +1 more

Abstract Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we show a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a platform to realize rich interactions and could potentially provide full control over the quantum motional states.

arXiv:2001.05700•Communications Physics•Jan 19, 2021•27 citations

Quantum State Engineering with Circuit Electromechanical Three-Body Interactions

Mehdi Abdi, Matthias Pernpeintner, Rudolf Groß +2 more

We propose a hybrid system with quantum mechanical three-body interactions between photons, phonons, and qubit excitations. These interactions take place in a circuit quantum electrodynamical architecture with a superconducting microwave resonator coupled to a transmon qubit whose shunt capacitance is free to mechanically oscillate. We show that this system design features a three-mode polariton-mechanical mode and a nonlinear transmon-mechanical mode interaction in the strong coupling regime. Together with the strong resonator-transmon interaction, these properties provide intriguing opportunities for manipulations of this hybrid quantum system. We show, in particular, the feasibility of cooling the mechanical motion down to its ground state and preparing various nonclassical states including mechanical Fock and cat states and hybrid tripartite entangled states.

arXiv:1502.03787•Physical Review Letters•Apr 28, 2015•49 citations

Probing the quantum motion of a macroscopic mechanical oscillator with a radio-frequency superconducting qubit

Kyrylo Gerashchenko, Rousseau, Rémi, Léo Balembois +11 more

Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime are a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated coherent interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of $21~\mathrm{μK}$ and read out with 77% single-shot fidelity. During the $6~\mathrm{ms}$ lifetime of the membrane the two systems swap excitations more than 300 times. After each interaction, a state-selective qubit detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the position noise spectrum of the membrane, revealing both its thermal occupation $n_\mathrm{th}\approx47$ at $10~\mathrm{mK}$ and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to $n_\mathrm{th}$ and $n_\mathrm{th}+1$, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Diósi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.

arXiv:2505.21481•May 27, 2025•0 citations

Prospects of cooling a mechanical resonator with a transmon qubit in c-QED setup

Sourav Majumder, Tanmoy Bera, Vibhor Singh

Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by the modulation of the superconducting quantum interference device inductance. In such a tripartite system, we analyze the steady-state occupation of the mechanical mode when all three modes are dispersively coupled. We use the quantum noise and the Lindblad formalism to show that the sideband cooling of the mechanical mode to its ground state is achievable. We further experimentally demonstrate that measurements of the thermomechanical motion are possible in the dispersive limit, while maintaining a large coupling between qubit and mechanical mode. Our theoretical calculations suggest that single-photon strong coupling is within the experimental reach in such hybrid devices.

arXiv:2205.07024•Physical Review Research•Sep 23, 2022•1 citation

Fluxonium qubit-based hybrid electromechanical system

Roson Nongthombam, Anshika Ranjan, Amarendra K. Sarma +1 more

Superconducting fluxonium qubits show a highly tunable energy-level structure, with transition frequencies spanning from a few MHz to few GHz. This range is well-aligned to the operational frequencies of highly coherent micro- and nano-mechanical resonators, making fluxonium an attractive candidate for hybrid electromechanical systems. In this work, we theoretically investigate a flux-tunable electromechanical system consisting of a fluxonium qubit coupled to a suspended mechanical resonator. The coupling arises from the motion-induced modulation of magnetic flux through the fluxonium loop, enabling both transverse and longitudinal electromechanical interactions that are tunable via external magnetic fields. By optimizing the design parameters of the fluxonium qubit, we demonstrate the feasibility of achieving strong resonant single-photon coupling near the flux-frustration point. We analyze the system dynamics across different coupling regimes, identifying signatures of electromagnetically induced transparency (EIT) in the longitudinal regime and mode splitting in the transverse regime. Additionally, we show that ground-state preparation of both subsystems is possible through sideband cooling of the mechanical resonator. These results suggest that a fluxonium-based hybrid electromechanical device could be a promising platform for studying macroscopic quantum phenomena and for applications in quantum technology.

arXiv:2508.17105•Physical Review A•May 18, 2026•0 citations
Abstract Massive mechanical resonators operating at the quantum scale can enable a large variety of applications in quantum technologies as well as fundamental tests of quantum theory. Of crucial importance in that direction is both their integrability into state-of-the-art quantum platforms as well as the ability to prepare them in generic quantum states using well-controlled high-fidelity operations. Here, we propose a scheme for controlling a radio-frequency mechanical resonator at the quantum scale using two superconducting transmon qubits that can be integrated on the same chip. Specifically, we consider two qubits coupled via a capacitor in parallel to a superconducting quantum interference device (SQUID), which has a suspended mechanical beam embedded in one of its arms. Following a theoretical analysis of the quantum system, we find that this configuration, in combination with an in-plane magnetic field, can give rise to a tuneable three-body interaction in the single-photon strong-coupling regime, while enabling suppression of the stray qubit-qubit coupling. Using state-of-the-art parameters and qubit operations at single-excitation levels, we numerically demonstrate the possibility of ground-state cooling as well as high-fidelity preparation of mechanical quantum states and qubit-phonon entanglement, i.e. states having negative Wigner functions and obeying non-classical correlations. Our work significantly extends the quantum control toolbox of radio-frequency mechanical resonators and may serve as a promising architecture for integrating such mechanical elements with transmon-based quantum processors.
This thesis explores nonlinear couplings in superconducting circuits with the purpose of achieving quantum control over the elementary excitations of light and motion. It consists mainly of three research themes. The first theme concerns the experimental realisation of a tuneable coupling scheme, giving rise to different interactions with adjustable ratios, between two transmon qubits. The tuneable capabilities of the device together with its versatile geometry and high coherence make it an interesting building block for analog quantum simulators of certain classes of complex problems. The second theme concerns two theoretical proposals for controlling mechanical resonators using transmon qubits. In the first part we analyse an electromechanical circuit architecture giving rise to tuneable three-body interactions between two qubits and a mechanical beam. Several protocols are performed numerically demonstrating ground-state cooling and the creation of mechanical quantum states, such as single-phonon and multi-phonon superposition states as well as qubit-phonon entanglement. Additionally, schemes for generating arbitrary quantum states are explored. The second part relies on the same concept for coupling a mechanical resonator to a transmon qubit and explores the qubit-resonator system in the ultrastrong coupling regime, where the optomechanical coupling approaches or even exceeds the mechanical frequency. We find that for certain coupling strengths ground-state cooling is possible and devise a protocol for generating macroscopic quantum superposition states, known as “Shrödinger cats”, on the mechanical resonator. Finally, the third research theme presented in the thesis concerns an experiment where a cold superconducting qubit is employed to readout and control a thermally populated radio-frequency resonator coupled via a strong dispersive coupling. By means of reservoir engineering, ground-state cooling as well as stabilisation of Fock states in the resonator are demonstrated reaching a new operating regime for circuit quantum electrodynamics.
Abstract Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we show a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a platform to realize rich interactions and could potentially provide full control over the quantum motional states.
We propose a hybrid system with quantum mechanical three-body interactions between photons, phonons, and qubit excitations. These interactions take place in a circuit quantum electrodynamical architecture with a superconducting microwave resonator coupled to a transmon qubit whose shunt capacitance is free to mechanically oscillate. We show that this system design features a three-mode polariton-mechanical mode and a nonlinear transmon-mechanical mode interaction in the strong coupling regime. Together with the strong resonator-transmon interaction, these properties provide intriguing opportunities for manipulations of this hybrid quantum system. We show, in particular, the feasibility of cooling the mechanical motion down to its ground state and preparing various nonclassical states including mechanical Fock and cat states and hybrid tripartite entangled states.
Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime are a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated coherent interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of 21 μK21~\mathrm{μK}21 μK and read out with 77% single-shot fidelity. During the 6 ms6~\mathrm{ms}6 ms lifetime of the membrane the two systems swap excitations more than 300 times. After each interaction, a state-selective qubit detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the position noise spectrum of the membrane, revealing both its thermal occupation nth≈47n_\mathrm{th}\approx47nth​≈47 at 10 mK10~\mathrm{mK}10 mK and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to nthn_\mathrm{th}nth​ and nth+1n_\mathrm{th}+1nth​+1, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Diósi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by the modulation of the superconducting quantum interference device inductance. In such a tripartite system, we analyze the steady-state occupation of the mechanical mode when all three modes are dispersively coupled. We use the quantum noise and the Lindblad formalism to show that the sideband cooling of the mechanical mode to its ground state is achievable. We further experimentally demonstrate that measurements of the thermomechanical motion are possible in the dispersive limit, while maintaining a large coupling between qubit and mechanical mode. Our theoretical calculations suggest that single-photon strong coupling is within the experimental reach in such hybrid devices.
Superconducting fluxonium qubits show a highly tunable energy-level structure, with transition frequencies spanning from a few MHz to few GHz. This range is well-aligned to the operational frequencies of highly coherent micro- and nano-mechanical resonators, making fluxonium an attractive candidate for hybrid electromechanical systems. In this work, we theoretically investigate a flux-tunable electromechanical system consisting of a fluxonium qubit coupled to a suspended mechanical resonator. The coupling arises from the motion-induced modulation of magnetic flux through the fluxonium loop, enabling both transverse and longitudinal electromechanical interactions that are tunable via external magnetic fields. By optimizing the design parameters of the fluxonium qubit, we demonstrate the feasibility of achieving strong resonant single-photon coupling near the flux-frustration point. We analyze the system dynamics across different coupling regimes, identifying signatures of electromagnetically induced transparency (EIT) in the longitudinal regime and mode splitting in the transverse regime. Additionally, we show that ground-state preparation of both subsystems is possible through sideband cooling of the mechanical resonator. These results suggest that a fluxonium-based hybrid electromechanical device could be a promising platform for studying macroscopic quantum phenomena and for applications in quantum technology.