Superconducting fluxonium qubits show a highly tunable energy-level structure, with transition frequencies spanning from a few MHz to few GHz. This range is well-aligned to the operational frequencies of highly coherent micro- and nano-mechanical resonators, making fluxonium an attractive candidate for hybrid electromechanical systems. In this work, we theoretically investigate a flux-tunable electromechanical system consisting of a fluxonium qubit coupled to a suspended mechanical resonator. The coupling arises from the motion-induced modulation of magnetic flux through the fluxonium loop, enabling both transverse and longitudinal electromechanical interactions that are tunable via external magnetic fields. By optimizing the design parameters of the fluxonium qubit, we demonstrate the feasibility of achieving strong resonant single-photon coupling near the flux-frustration point. We analyze the system dynamics across different coupling regimes, identifying signatures of electromagnetically induced transparency (EIT) in the longitudinal regime and mode splitting in the transverse regime. Additionally, we show that ground-state preparation of both subsystems is possible through sideband cooling of the mechanical resonator. These results suggest that a fluxonium-based hybrid electromechanical device could be a promising platform for studying macroscopic quantum phenomena and for applications in quantum technology.
Superconducting fluxonium qubits show a highly tunable energy-level structure, with transition frequencies spanning from a few MHz to few GHz. This range is well-aligned to the operational frequencies of highly coherent micro- and nano-mechanical resonators, making fluxonium an attractive candidate for hybrid electromechanical systems. In this work, we theoretically investigate a flux-tunable electromechanical system consisting of a fluxonium qubit coupled to a suspended mechanical resonator. The coupling arises from the motion-induced modulation of magnetic flux through the fluxonium loop, enabling both transverse and longitudinal electromechanical interactions that are tunable via external magnetic fields. By optimizing the design parameters of the fluxonium qubit, we demonstrate the feasibility of achieving strong resonant single-photon coupling near the flux-frustration point. We analyze the system dynamics across different coupling regimes, identifying signatures of electromagnetically induced transparency (EIT) in the longitudinal regime and mode splitting in the transverse regime. Additionally, we show that ground-state preparation of both subsystems is possible through sideband cooling of the mechanical resonator. These results suggest that a fluxonium-based hybrid electromechanical device could be a promising platform for studying macroscopic quantum phenomena and for applications in quantum technology.
Abstract Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we show a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a platform to realize rich interactions and could potentially provide full control over the quantum motional states.
Superconducting qubits, realized by incorporating Josephson junctions into superconducting circuits, behave as artificial atoms with anharmonic energy spectra and can be precisely controlled and measured using microwave cavities within the framework of circuit quantum electrodynamics (cQED). Since its emergence in the early 2000s, cQED has established superconducting qubits as leading candidates for scalable quantum devices and has enabled the exploration of hybrid quantum systems that integrate disparate physical platformsThis review surveys superconducting hybrid quantum electromechanical systems in which mechanical resonators are coupled to superconducting qubits, with a focus on two widely used qubit platforms: the transmon and the fluxonium. We provide an overview of the underlying coupling mechanisms arising from interactions through the phase and charge degrees of freedom of the qubit, and discuss how these mechanisms give rise to both longitudinal and transverse qubit-mechanical interactions. We further review extensions of electromechanical platforms to electro-optomechanical architectures, in which optical cavities are integrated to enable coherent interfacing between superconducting circuits and optical photons. This review aims to present a unified framework and perspective on qubit-mechanical and qubit-mechanical-optical hybrid systems in superconducting quantum technologies and applications related to sensors.
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by the modulation of the superconducting quantum interference device inductance. In such a tripartite system, we analyze the steady-state occupation of the mechanical mode when all three modes are dispersively coupled. We use the quantum noise and the Lindblad formalism to show that the sideband cooling of the mechanical mode to its ground state is achievable. We further experimentally demonstrate that measurements of the thermomechanical motion are possible in the dispersive limit, while maintaining a large coupling between qubit and mechanical mode. Our theoretical calculations suggest that single-photon strong coupling is within the experimental reach in such hybrid devices.
We discuss level splitting and sideband transitions induced by a modulated coupling between a superconducting quantum circuit and a nanomechanical resonator. First, we show how to achieve an unconventional time-dependent longitudinal coupling between a flux (transmon) qubit and the resonator. Considering a sinusoidal modulation of the coupling strength, we find that a first-order sideband transition can be split into two. Moreover, under the driving of a red-detuned field, we discuss the optical response of the qubit for a resonant probe field. We show that level splitting induced by modulating this longitudinal coupling can enable two-color electromagnetically induced transparency (EIT), in addition to single-color EIT. In contrast to standard predictions of two-color EIT in atomic systems, we apply here only a single drive (control) field. The monochromatic modulation of the coupling strength is equivalent to employing two eigenfrequency-tunable mechanical resonators. Both drive-probe detuning for single-color EIT and the distance between transparent windows for two-color EIT can be adjusted by tuning the modulation frequency of the coupling.
Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read out with standard microwave techniques. Here, we design and operate a heavy fluxonium with an unprecedentedly low transition frequency of 1.8 MHz. We demonstrate resolved sideband cooling of the “hot” qubit transition with a final ground state population of 97.7%, corresponding to an effective temperature of 23 μ K . We further demonstrate coherent manipulation with coherence times T 1 = 34 μ s , T 2 * = 39 μ s , and single-shot readout of the qubit state. Importantly, by directly addressing the qubit transition with a capacitively coupled waveguide, we showcase its high sensitivity to a radio-frequency field. Through cyclic qubit preparation and interrogation, we transform this low-frequency fluxonium qubit into a frequency-resolved charge sensor. This method results in a charge sensitivity of 33 μ e / Hz , or an energy sensitivity (in joules per hertz) of 2.8 ℏ . This method rivals state-of-the-art transport-based devices, while maintaining inherent insensitivity to dc-charge noise. The high charge sensitivity combined with large capacitive shunt unlocks new avenues for exploring quantum phenomena in the 1–10 MHz range, such as the strong-coupling regime with a resonant macroscopic mechanical resonator. Published by the American Physical Society 2024
Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.