Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1902.09500 · IEEE Transactions on Applied Superconductivity

ERSFQ 8-Bit Parallel Arithmetic Logic Unit

Alex F. Kirichenko, Igor V. Vernik, Michael Y. Kamkar, Jason Walter, Maximilian Miller, Lucian Remus Albu, Oleg A. Mukhanov

Published Mar 18, 2019• 47 citations
arXivHTMLPDF

Abstract

We have designed and tested a parallel 8-bit ERSFQ arithmetic logic unit (ALU). The ALU design employs wave-pipelined instruction execution and features modular bit-slice architecture that is easily extendable to any number of bits and adaptable to current recycling. A carry signal synchronized with an asynchronous instruction propagation provides the wave-pipeline operation of the ALU. The ALU instruction set consists of 14 arithmetical and logical instructions. It has been designed and simulated for operation up to a 10 GHz clock rate at the 10-kA/cm2fabrication process. The ALU is embedded into a shift-register-based high-frequency testbed with on-chip clock generator to allow for comprehensive high frequency testing for all possible operands. The 8-bit ERSFQ ALU, comprising 6840 Josephson junctions, has been fabricated with MIT Lincoln Lab's 10-kA/cm2SFQ5ee fabrication process featuring eight Nb wiring layers and a high-kinetic inductance layer needed for ERSFQ technology. We evaluated the bias margins for all instructions and various operands at both low and high frequency clock. At low frequency, clock and all instruction propagation through ALU were observed with bias margins of +/-11% and +/-9%, respectively. Also at low speed, the ALU exhibited correct functionality for all arithmetical and logical instructions with +/-6% bias margins. We tested the 8-bit ALU for all instructions up to 2.8 GHz clock frequency.

DOI
10.1109/tasc.2019.2904484

Related papers

8-Bit Asynchronous Sparse-Tree Superconductor RSFQ Arithmetic-Logic Unit With a Rich Set of Operations

M. Dorojevets, Christopher Lawrence Ayala, Nobuyuki Yoshikawa +1 more

This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.

IEEE Transactions on Applied Superconductivity•Nov 21, 2012•35 citations

4-bit Bit-Slice Arithmetic Logic Unit for 32-bit RSFQ Microprocessors

Guang-Ming Tang, Takata Kensuke, Masamitsu Tanaka +3 more

A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.

IEEE Transactions on Applied Superconductivity•Dec 10, 2015•64 citations

50 GHz Operation of RSFQ Arithmetic Logic Unit Designed Using the Advanced Design Flow and the Dual RSFQ/ERSFQ Cell Library

Amol Inamdar, Sukanya Sagarika Meher, Benjamin Chonigman +3 more

Arithmetic Logic Unit (ALU) is an integral part of digital signal processing applications and computing systems. We used ALU, based on Kogge-Stone adder, as a reference circuit to experimentally validate the advanced design flow and the dual RSFQ/ERSFQ standard cell library. Using the advanced design flow, the ALU sub-blocks were optimized across multiple process corners using Monte-Carlo simulations incorporating statistical variations in the process parameters. The correct operation of ALU was verified in the digital HDL simulation using static timing analysis pre-fabrication. We designed the RSFQ 1-bit and 4-bit ALU using the standard cell library approach for MIT-LL 100 µA/µm2SFQ5ee fab node. For the ERSFQ 1-bit ALU, the bias current overhead for the feeding JTLs was designed to be 100% of the ERSFQ DUT bias current. The RSFQ 1-bit ALU, designed for low frequency functional testing, demonstrated greater than ±15% bias margins. We demonstrated successful operation of the RSFQ 4-bit ALU with greater than ±6% bias margins at 20 GHz, greater than ±5% bias margins at 40 GHz, and greater than ±4% bias margins at 50 GHz clock frequency with BER less than 10−12. The ERSFQ 1-bit ALU worked up to 30.72 GHz clock frequency with BER less than 10−12. In addition, we analyzed the model-to-hardware correlation for the INIT sub-block of the ALU. The simulations accounted for critical current density (Jc) and sheet resistance (Rs) process parameters. We noted the discrepancy in simulated and measured margins and studied that a 15% higherJcin simulations results in better model-to-hardware correlation for the INIT sub-block.

IEEE Transactions on Applied Superconductivity•Jan 30, 2023•12 citations

80-GHz Operation of an 8-Bit RSFQ Arithmetic Logic Unit

Yuki Ando, Ryo Sato, Masamitsu Tanaka +2 more

We have designed and demonstrated an arithmetic logic unit (ALU) based on rapid single-flux-quantum (RSFQ) technology. The ALU has been developed toward demonstration of high-performance information processing using a general purpose microprocessor CORE e4. The target operation frequency of the ALU is 50 GHz. In this paper, we present the design and high- speed functionality test results of the ALU. The ALU can execute 10 instructions. We aimed at high frequency operation with precise timing design using logic gates synchronized to the clock signal. The ALU contains 1555 Josephson junctions (JJs) and occupies a circuit area of 0.53mm2. We have demonstrated the correct operation of the ALU using on-chip high-speed test. The estimated maximum operating frequency based on measurement results is 80 GHz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•21 citations

8-Bit Asynchronous Wave-Pipelined RSFQ Arithmetic-Logic Unit

Timur V. Filippov, M. Dorojevets, Anubhav Sahu +3 more

We have designed and demonstrated an Arithmetic-Logic Unit (ALU) based on RSFQ technology as a required step toward building an 8-bit RSFQ processor datapath. The circuit was designed and fabricated with HYPRES' standard 4.5 kA/cm2process. The target clock frequency of the ALU is 20 GHz. In this paper, we present the design and functionality (low-speed) test results of the 8-bit ALU.

IEEE Transactions on Applied Superconductivity•Feb 11, 2011•70 citations

20GHz Operation of an Asynchronous Wave-Pipelined RSFQ Arithmetic-Logic Unit

Timur V. Filippov, Anubhav Sahu, Alex F. Kirichenko +4 more

We have designed and tested at high frequency an RSFQ-based Arithmetic-Logic Unit (ALU), the critical component of an 8-bit RSFQ processor datapath. The ALU design is based on a Kogge-Stone adder and employs an asynchronous wave-pipelined approach scalable for wide datapath processors. The 8-bit ALU circuit was fabricated with HYPRES’ standard 4.5 kA/cm2 process and consists of 7,950 Josephson junctions, including input and output interfaces. In this paper, we present chip design and high-speed test results for the 8-bit ALU circuit.

Physics Procedia•Jan 1, 2012•107 citations
We have designed and tested a parallel 8-bit ERSFQ arithmetic logic unit (ALU). The ALU design employs wave-pipelined instruction execution and features modular bit-slice architecture that is easily extendable to any number of bits and adaptable to current recycling. A carry signal synchronized with an asynchronous instruction propagation provides the wave-pipeline operation of the ALU. The ALU instruction set consists of 14 arithmetical and logical instructions. It has been designed and simulated for operation up to a 10 GHz clock rate at the 10-kA/cm2fabrication process. The ALU is embedded into a shift-register-based high-frequency testbed with on-chip clock generator to allow for comprehensive high frequency testing for all possible operands. The 8-bit ERSFQ ALU, comprising 6840 Josephson junctions, has been fabricated with MIT Lincoln Lab's 10-kA/cm2SFQ5ee fabrication process featuring eight Nb wiring layers and a high-kinetic inductance layer needed for ERSFQ technology. We evaluated the bias margins for all instructions and various operands at both low and high frequency clock. At low frequency, clock and all instruction propagation through ALU were observed with bias margins of +/-11% and +/-9%, respectively. Also at low speed, the ALU exhibited correct functionality for all arithmetical and logical instructions with +/-6% bias margins. We tested the 8-bit ALU for all instructions up to 2.8 GHz clock frequency.
This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.
A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.
Arithmetic Logic Unit (ALU) is an integral part of digital signal processing applications and computing systems. We used ALU, based on Kogge-Stone adder, as a reference circuit to experimentally validate the advanced design flow and the dual RSFQ/ERSFQ standard cell library. Using the advanced design flow, the ALU sub-blocks were optimized across multiple process corners using Monte-Carlo simulations incorporating statistical variations in the process parameters. The correct operation of ALU was verified in the digital HDL simulation using static timing analysis pre-fabrication. We designed the RSFQ 1-bit and 4-bit ALU using the standard cell library approach for MIT-LL 100 µA/µm2SFQ5ee fab node. For the ERSFQ 1-bit ALU, the bias current overhead for the feeding JTLs was designed to be 100% of the ERSFQ DUT bias current. The RSFQ 1-bit ALU, designed for low frequency functional testing, demonstrated greater than ±15% bias margins. We demonstrated successful operation of the RSFQ 4-bit ALU with greater than ±6% bias margins at 20 GHz, greater than ±5% bias margins at 40 GHz, and greater than ±4% bias margins at 50 GHz clock frequency with BER less than 10−12. The ERSFQ 1-bit ALU worked up to 30.72 GHz clock frequency with BER less than 10−12. In addition, we analyzed the model-to-hardware correlation for the INIT sub-block of the ALU. The simulations accounted for critical current density (Jc) and sheet resistance (Rs) process parameters. We noted the discrepancy in simulated and measured margins and studied that a 15% higherJcin simulations results in better model-to-hardware correlation for the INIT sub-block.
We have designed and demonstrated an arithmetic logic unit (ALU) based on rapid single-flux-quantum (RSFQ) technology. The ALU has been developed toward demonstration of high-performance information processing using a general purpose microprocessor CORE e4. The target operation frequency of the ALU is 50 GHz. In this paper, we present the design and high- speed functionality test results of the ALU. The ALU can execute 10 instructions. We aimed at high frequency operation with precise timing design using logic gates synchronized to the clock signal. The ALU contains 1555 Josephson junctions (JJs) and occupies a circuit area of 0.53mm2. We have demonstrated the correct operation of the ALU using on-chip high-speed test. The estimated maximum operating frequency based on measurement results is 80 GHz.
We have designed and tested at high frequency an RSFQ-based Arithmetic-Logic Unit (ALU), the critical component of an 8-bit RSFQ processor datapath. The ALU design is based on a Kogge-Stone adder and employs an asynchronous wave-pipelined approach scalable for wide datapath processors. The 8-bit ALU circuit was fabricated with HYPRES’ standard 4.5 kA/cm2 process and consists of 7,950 Josephson junctions, including input and output interfaces. In this paper, we present chip design and high-speed test results for the 8-bit ALU circuit.