Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.07670 · physica status solidi (b)

Operation of a Microfabricated Planar Ion‐Trap for Studies of a Yb+–Rb Hybrid Quantum System

Abasalt Bahrami, Matthias Müller, Martin Drechsler, J. Joger, R. Gerritsma, Ferdinand Schmidt‐Kaler

Published Apr 16, 2019• 10 citations
arXivHTMLPDF

Abstract

In order to study interactions of atomic ions with ultracold neutral atoms, it is important to have sub‐µm control over positioning ion crystals. Serving for this purpose, a microfabricated planar ion trap featuring 21 DC electrodes is introduced. The ion trap is controlled by a home‐made FPGA voltage source providing independently variable voltages to each of the DC electrodes. To assure stable positioning of ion crystals with respect to trapped neutral atoms, the authors integrate into the overall design a compact mirror magneto optical chip trap (mMOT) for cooling and confining neutral 87Rb atoms. The trapped atoms will be transferred into an also integrated chip‐based Ioffe‐Pritchard trap potential formed by a Z‐shaped wire and an external bias magnetic field. The authors introduce the hybrid atom–ion chip, the microfabricated planar ion trap, and use trapped ion crystals to determine ion lifetimes, trap frequencies, positioning ions, and the accuracy of the compensation of micromotion.

DOI
10.1002/pssb.201800647

Related papers

Realization of a chip-based hybrid trapping setup for 87Rb atoms and Yb+ ion crystals

Abasalt Bahrami, Ferdinand Schmidt‐Kaler

Hybrid quantum systems integrate laser-cooled trapped ions and ultracold quantum gases within a single experimental configuration, offering vast potential for applications in quantum chemistry, polaron physics, quantum information processing, and quantum simulations. In this study, we introduce the development and experimental validation of an ion trap chip that incorporates a flat atomic chip trap directly beneath it. This innovative design addresses specific challenges associated with hybrid atom-ion traps by providing precisely aligned and stable components, facilitating independent adjustments of the depth of the atomic trapping potential, and positioning trapped ions. Our findings include the simultaneous loading of the ion trap with linear Yb+ ion crystals and the loading of neutral 87Rb atoms into a mirror magneto-optical trap.

arXiv:2401.03039•Review of Scientific Instruments•Aug 1, 2024•1 citation

Hybrid Trapping of $^{87}$Rb Atoms and Yb$^{+}$ Ions in a Chip-Based Experimental Setup

Abasalt Bahrami, Matthias M. Müller, Ferdinand Schmidt‐Kaler

Hybrid quantum systems that unite laser-cooled trapped ions and ultracold quantum gases in a single experimental setup have opened a rapidly advancing field of study, including Quantum chemistry, polaron physics, quantum information processing and quantum simulations. We present a fully developed and tested ion trap chip and propose a flat chip trap that can be placed beneath the ion trap. This design substantially addresses the difficulties specific to hybrid traps and features well-aligned chips that allow for independent adjustment of the depth of the atomic trap and the confinement and positioning of ions. The ion trap has been successfully tested with linear ion crystals of Yb$^{+}$ and neutral $^{87}$Rb were also loaded into a mMOT a few millimeters under the ion trapping region.

arXiv:2301.10864•Jan 25, 2023•0 citations

Trapping and cooling of 174Yb+ ions in a microfabricated surface trap

Rachel Noek, Taehyun Kim, Emily Mount +3 more

Trapped atomic ions are the leading candidate to act as individual quantum bits in a large quantum information processing system. Ion traps can be conformed to a two-dimensional surface, which provides a way to increase the number of ions while maintaining the ability to move individual ions in a two-dimensional grid. However, surface traps tend to suffer from shallow trap depths and higher motional heating rates. In this work, we report the design, fabrication, and testing of a simple gold-on-fused-silica ion trap optimized for a deep trapping potential and stable motional modes. The desirable trap characteristics include long lifetime, fully-compensated micromotion, and high secular trap frequencies that were measured using a trapped and cooled 174 Yb + ion. This trap design can be integrated with an optical cavity to enhance the ion-photon coupling.

Journal of the Korean Physical Society•Aug 1, 2013•5 citations

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

S. Charles Doret, Jason Amini, Kenneth Wright +8 more

Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled dc electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on dc electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.

arXiv:1204.4147•New Journal of Physics•Jul 6, 2012•77 citations

A Quantum Interface Between Neutral-Atoms and Trapped-Ions Quantum Registers

Ayelet Hasson, Gal Dekel, Ehud Shahar +2 more

Hybrid quantum systems combining neutral atoms and trapped ions offer the prospect of integrating the scalability of atom arrays with the high-fidelity control available in trapped-ion platforms. Here we propose and analyze a quantum interface between individually trapped neutral atoms and a trapped-ion crystal. In our scheme, a neutral 88Sr atom trapped in optical tweezers interacts with a small 88Sr+ ion crystal, and by exciting the atom to a Rydberg state, the atom-ion polarization interaction is strongly enhanced, resulting in a state-dependent modification of the ions' collective motional modes. We show that this shift enables conditional control of a MS gate, allowing the neutral atom to act as a control qubit for an entangling operation between two ions. We investigate the feasibility of the scheme by analyzing Rydberg trapping in the combined optical tweezers and Paul trap potentials, identifying negative-polarizability Rydberg states as particularly favorable for stable confinement. We further evaluate the relevant trapping conditions, Rydberg lifetimes, and coherence requirements, and show that the proposed interface is compatible with realistic experimental parameters. These results establish a practical route toward deterministic atom-ion hybrid quantum gates and quantum interfaces.

quant-pharXiv:2607.20998•Jul 24, 2026•0 citations

The development of microfabricated ion traps towards quantum information and simulation

Marcus Hughes

Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.

•Jun 16, 2013•0 citations
In order to study interactions of atomic ions with ultracold neutral atoms, it is important to have sub‐µm control over positioning ion crystals. Serving for this purpose, a microfabricated planar ion trap featuring 21 DC electrodes is introduced. The ion trap is controlled by a home‐made FPGA voltage source providing independently variable voltages to each of the DC electrodes. To assure stable positioning of ion crystals with respect to trapped neutral atoms, the authors integrate into the overall design a compact mirror magneto optical chip trap (mMOT) for cooling and confining neutral 87Rb atoms. The trapped atoms will be transferred into an also integrated chip‐based Ioffe‐Pritchard trap potential formed by a Z‐shaped wire and an external bias magnetic field. The authors introduce the hybrid atom–ion chip, the microfabricated planar ion trap, and use trapped ion crystals to determine ion lifetimes, trap frequencies, positioning ions, and the accuracy of the compensation of micromotion.
Hybrid quantum systems integrate laser-cooled trapped ions and ultracold quantum gases within a single experimental configuration, offering vast potential for applications in quantum chemistry, polaron physics, quantum information processing, and quantum simulations. In this study, we introduce the development and experimental validation of an ion trap chip that incorporates a flat atomic chip trap directly beneath it. This innovative design addresses specific challenges associated with hybrid atom-ion traps by providing precisely aligned and stable components, facilitating independent adjustments of the depth of the atomic trapping potential, and positioning trapped ions. Our findings include the simultaneous loading of the ion trap with linear Yb+ ion crystals and the loading of neutral 87Rb atoms into a mirror magneto-optical trap.
Hybrid Trapping of 87^{87}87Rb Atoms and Yb+^{+}+ Ions in a Chip-Based Experimental Setup
Hybrid quantum systems that unite laser-cooled trapped ions and ultracold quantum gases in a single experimental setup have opened a rapidly advancing field of study, including Quantum chemistry, polaron physics, quantum information processing and quantum simulations. We present a fully developed and tested ion trap chip and propose a flat chip trap that can be placed beneath the ion trap. This design substantially addresses the difficulties specific to hybrid traps and features well-aligned chips that allow for independent adjustment of the depth of the atomic trap and the confinement and positioning of ions. The ion trap has been successfully tested with linear ion crystals of Yb+^{+}+ and neutral 87^{87}87Rb were also loaded into a mMOT a few millimeters under the ion trapping region.
Trapped atomic ions are the leading candidate to act as individual quantum bits in a large quantum information processing system. Ion traps can be conformed to a two-dimensional surface, which provides a way to increase the number of ions while maintaining the ability to move individual ions in a two-dimensional grid. However, surface traps tend to suffer from shallow trap depths and higher motional heating rates. In this work, we report the design, fabrication, and testing of a simple gold-on-fused-silica ion trap optimized for a deep trapping potential and stable motional modes. The desirable trap characteristics include long lifetime, fully-compensated micromotion, and high secular trap frequencies that were measured using a trapped and cooled 174 Yb + ion. This trap design can be integrated with an optical cavity to enhance the ion-photon coupling.
Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled dc electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on dc electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.
Hybrid quantum systems combining neutral atoms and trapped ions offer the prospect of integrating the scalability of atom arrays with the high-fidelity control available in trapped-ion platforms. Here we propose and analyze a quantum interface between individually trapped neutral atoms and a trapped-ion crystal. In our scheme, a neutral 88Sr atom trapped in optical tweezers interacts with a small 88Sr+ ion crystal, and by exciting the atom to a Rydberg state, the atom-ion polarization interaction is strongly enhanced, resulting in a state-dependent modification of the ions' collective motional modes. We show that this shift enables conditional control of a MS gate, allowing the neutral atom to act as a control qubit for an entangling operation between two ions. We investigate the feasibility of the scheme by analyzing Rydberg trapping in the combined optical tweezers and Paul trap potentials, identifying negative-polarizability Rydberg states as particularly favorable for stable confinement. We further evaluate the relevant trapping conditions, Rydberg lifetimes, and coherence requirements, and show that the proposed interface is compatible with realistic experimental parameters. These results establish a practical route toward deterministic atom-ion hybrid quantum gates and quantum interfaces.
Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.