Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.01891 · IEEE Transactions on Applied Superconductivity

Jitter Characterization of a Dual-Readout SNSPD

Daniel F. Santavicca, Brian Noble, Cameron Kilgore, Gregory A. Wurtz, Marco Colangelo, Di Zhu, Karl K. Berggren

Published Apr 27, 2019• 9 citations
arXivHTMLPDF

Abstract

To better understand the origins of the timing resolution, also known as jitter, of superconducting nanowire single-photon detectors (SNSPDs), we have performed timing characterizations of a niobium nitride SNSPD with a dual-ended readout. By simultaneously measuring both readout pulses along with an optical timing reference signal, we are able to quantify each independent contribution to the total measured jitter. In particular, we are able to determine values for the jitter due to the stochastic nature of hotspot formation and the jitter due to the variation of the photon detection location along the length of the nanowire. We compare the results of this analysis for measurements at temperatures of 1.5 and 4.5 K.

DOI
10.1109/tasc.2019.2895609

Related papers

Improving the timing jitter of a superconducting nanowire single-photon detection system

Junjie Wu, Lixing You, Sijing Chen +5 more

Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.

Applied Optics•Mar 6, 2017•96 citations

Superconducting nanowire detector jitter limited by detector geometry

Niccolò Calandri, Qingyuan Zhao, Di Zhu +2 more

Detection jitter quantifies variance introduced by the detector in the determination of photon arrival time. It is a crucial performance parameter for systems using superconducting nanowire single photon detectors (SNSPDs). In this work, we have demonstrated that the detection timing jitter is limited in part by the spatial variation of the photon detection events along the length of the wire. We define this jitter source as a geometric jitter since it is related to the length and area of the SNSPD. To characterize the geometric jitter, we have constructed a differential cryogenic readout with less than 7 ps of an electronic jitter that can amplify the pulses generated from the two ends of an SNSPD. By differencing the measured arrival times of the two electrical pulses, we were able to partially cancel out the difference of the propagation times and thus reduce the uncertainty of the photon arrival time. We proved that the variation of the differential propagation time was a few ps for a 3 μm × 3 μm device, while it increased up to 50 ps for a 20 μm × 20 μm device. In a 20 μm × 20 μm large SNSPD, we achieved a 20% reduction in the overall detection timing jitter for detecting the telecom-wavelength photons by using the differential cryogenic readout.

arXiv:1607.06713•Applied Physics Letters•Oct 10, 2016•114 citations

Jitter analysis of a superconducting nanowire single photon detector

Lixing You, Xiaoyan Yang, Yuhao He +9 more

Jitter is one of the key parameters for a superconducting nanowire single photon detector (SNSPD). Using an optimized time-correlated single photon counting system for jitter measurement, we extensively studied the dependence of system jitter on the bias current and working temperature. The signal-to-noise ratio of the single-photon-response pulse was proven to be an important factor in system jitter. The final system jitter was reduced to 18 ps by using a high-critical-current SNSPD, which showed an intrinsic SNSPD jitter of 15 ps. A laser ranging experiment using a 15-ps SNSPD achieved a record depth resolution of 3 mm at a wavelength of 1550 nm.

arXiv:1308.0763•AIP Advances•Jul 1, 2013•135 citations

Temporal and photon number resolution of superconducting nanowire single-photon detectors

Jun Xie, Hengbin Zhang

Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.

Applied Physics B•Jun 5, 2024•6 citations

Timing Jitter Induced by Stochastic Baseline Fluctuations in High-Count-Rate Superconducting Nanowire Single-Photon Detectors

Dianpeng Wang, You Xiao, Jiamin Xiong +7 more

Superconducting nanowire single-photon detectors (SNSPDs) have demonstrated timing jitter in the few-picosecond regime, yet their timing resolution deteriorates substantially under high-count-rate operation. Existing interpretations mainly attribute this degradation to deterministic waveform distortions, such as multiphoton responses and pulse pile-up, yet the experimentally observed jitter broadening at high count rates cannot be fully accounted for within this picture. Here, we show that stochastic baseline fluctuations arising from finite-memory readout dynamics constitute an intrinsic source of the count-rate-dependent timing jitter in SNSPD systems. For stochastically arriving photons, overlapping recovery responses accumulate in the readout chain and generate statistically fluctuating baselines, which are converted into timing uncertainty through threshold-based timing extraction. We develop a stochastic-process framework that quantitatively connects photon statistics, readout dynamics, and timing jitter. The framework predicts characteristic scaling behaviors, including a nonmonotonic dependence of baseline fluctuations under pulsed excitation with a maximum near half of the repetition frequency. These predictions are quantitatively verified through systematic variations of count rate, circuit time constant, and detector dynamical properties. Our results identify stochastic baseline dynamics as a fundamental mechanism limiting timing resolution in high-count-rate SNSPD operation and provide a general framework for optimizing finite-memory high-speed photon-counting systems.

physics.app-phCross-listedarXiv:2605.14316•May 15, 2026

Improving superconducting nanowire single-photon detectors made of NbTiN using a novel method to characterize the timing jitter (Conference Presentation)

Rasmus Flaschmann, Lucio Zugliani, Christian Schmid +10 more

In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.

Quantum Nanophotonic Materials, Devices, and Systems•Oct 4, 2022•0 citations
To better understand the origins of the timing resolution, also known as jitter, of superconducting nanowire single-photon detectors (SNSPDs), we have performed timing characterizations of a niobium nitride SNSPD with a dual-ended readout. By simultaneously measuring both readout pulses along with an optical timing reference signal, we are able to quantify each independent contribution to the total measured jitter. In particular, we are able to determine values for the jitter due to the stochastic nature of hotspot formation and the jitter due to the variation of the photon detection location along the length of the nanowire. We compare the results of this analysis for measurements at temperatures of 1.5 and 4.5 K.
Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.
Detection jitter quantifies variance introduced by the detector in the determination of photon arrival time. It is a crucial performance parameter for systems using superconducting nanowire single photon detectors (SNSPDs). In this work, we have demonstrated that the detection timing jitter is limited in part by the spatial variation of the photon detection events along the length of the wire. We define this jitter source as a geometric jitter since it is related to the length and area of the SNSPD. To characterize the geometric jitter, we have constructed a differential cryogenic readout with less than 7 ps of an electronic jitter that can amplify the pulses generated from the two ends of an SNSPD. By differencing the measured arrival times of the two electrical pulses, we were able to partially cancel out the difference of the propagation times and thus reduce the uncertainty of the photon arrival time. We proved that the variation of the differential propagation time was a few ps for a 3 μm × 3 μm device, while it increased up to 50 ps for a 20 μm × 20 μm device. In a 20 μm × 20 μm large SNSPD, we achieved a 20% reduction in the overall detection timing jitter for detecting the telecom-wavelength photons by using the differential cryogenic readout.
Jitter is one of the key parameters for a superconducting nanowire single photon detector (SNSPD). Using an optimized time-correlated single photon counting system for jitter measurement, we extensively studied the dependence of system jitter on the bias current and working temperature. The signal-to-noise ratio of the single-photon-response pulse was proven to be an important factor in system jitter. The final system jitter was reduced to 18 ps by using a high-critical-current SNSPD, which showed an intrinsic SNSPD jitter of 15 ps. A laser ranging experiment using a 15-ps SNSPD achieved a record depth resolution of 3 mm at a wavelength of 1550 nm.
Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.
Superconducting nanowire single-photon detectors (SNSPDs) have demonstrated timing jitter in the few-picosecond regime, yet their timing resolution deteriorates substantially under high-count-rate operation. Existing interpretations mainly attribute this degradation to deterministic waveform distortions, such as multiphoton responses and pulse pile-up, yet the experimentally observed jitter broadening at high count rates cannot be fully accounted for within this picture. Here, we show that stochastic baseline fluctuations arising from finite-memory readout dynamics constitute an intrinsic source of the count-rate-dependent timing jitter in SNSPD systems. For stochastically arriving photons, overlapping recovery responses accumulate in the readout chain and generate statistically fluctuating baselines, which are converted into timing uncertainty through threshold-based timing extraction. We develop a stochastic-process framework that quantitatively connects photon statistics, readout dynamics, and timing jitter. The framework predicts characteristic scaling behaviors, including a nonmonotonic dependence of baseline fluctuations under pulsed excitation with a maximum near half of the repetition frequency. These predictions are quantitatively verified through systematic variations of count rate, circuit time constant, and detector dynamical properties. Our results identify stochastic baseline dynamics as a fundamental mechanism limiting timing resolution in high-count-rate SNSPD operation and provide a general framework for optimizing finite-memory high-speed photon-counting systems.
In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.