Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Nanophotonic Materials, Devices, and Systems

Improving superconducting nanowire single-photon detectors made of NbTiN using a novel method to characterize the timing jitter (Conference Presentation)

Rasmus Flaschmann, Lucio Zugliani, Christian Schmid, Stefan Strohauer, Fabian Wietschorke, Stefanie Grotowski, Simone Spedicato, Sven Ernst, Fabian Flassig, Matthias Althammer, Rudolf Groß, Jonathan James Finley, Kai Müller

Published Oct 4, 2022• 0 citations
Publisher

Abstract

In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.

DOI
10.1117/12.2633465

Related papers

Tailoring Superconducting Nanowire Single-Photon Detectors for Quantum Technologies

Lucio Zugliani, Christian Schmid, Fabian Wietschorke +10 more

Superconducting nanowire single-photon detectors (SNSPDs) are a key building block for photonic quantum technologies, as they provide a means for efficient readout of optical circuits with low timing jitter, dark counts and dead time. In this contribution we give a general overview of the working principle of these devices and look into several engineering aspects. We discuss the influence of the stoichiometry of NbTiN thin-films on detector performance and find that a ratio of 65:35 Nb:Ti results in the highest saturation of SNSPDs fabricated from these films. Furthermore, we study the impact of helium ion irradiation on the efficiency of SNSPDs. We show that with this technique the efficiency of an SNSPD can be improved from below 1% to 42%. Finally, we discuss the impact of embedding the SNSPDs into an optical cavity on the system detection efficiency. By employing a half-cavity under the detector we are able to boost the efficiency from 30% to 50% for a detector with a fill factor of 0.33.

IEEE Globecom Workshops (GC Wkshps)•Dec 4, 2023•2 citations

Superconducting nanowire single-photon detectors made of NbTiN and MoSi (Conference Presentation)

Lucio Zugliani, Rasmus Flaschmann, Christian Schmid +10 more

In this work, recent developments in the study of Superconducting Nanowire Single Photon Detectors (SNSPDs) are presented. This devices properties highly depends on the quality of the superconducting films from which they are fabricated. Here, we study some film properties for SNSPDs made out of NbTiN and MoSi in function of the deposition parameters. Subsequently we focus on the properties of the fabricated detector, such as efficiency, timing resolution and energy sensitivity.

Quantum Communications and Quantum Imaging•Oct 3, 2022•0 citations

Micro-fiber coupled superconducting nanowire single photon detector (Conference Presentation)

Lixing You

Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.

Advanced Photon Counting Techniques•May 1, 2020•0 citations

Comparison of Superconducting Nanowire Single-Photon Detectors Made of NbTiN and NbN Thin Films

Xiaoyan Yang, Lixing You, Lu Zhang +5 more

We fabricated superconducting nanowire single-photon detectors (SNSPDs) made of NbTiN and NbN thin films in the same fabrication batch. Various parameters, such as critical temperature, resistivity, switching current, and kinetic inductance, were compared between the two types of SNSPDs. These data indicate that NbTiN SNSPD surpasses NbN SNSPD in many aspects, including a shorter recovery time due to smaller kinetic inductance, a lower timing jitter due to higher switching current, and better uniformity. Based on the measurement of 28 out of 121 NbTiN SNSPDs on a 2-in Si wafer, 71% of detectors show a system detection efficiency of over 50% at a dark count rate of 100 Hz, with the maximum efficiency being 77.5%.

IEEE Transactions on Applied Superconductivity•Nov 22, 2017•39 citations

High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors

Misael Caloz, Matthieu Perrenoud, Claire Autebert +6 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

arXiv:1710.06740•Applied Physics Letters•Feb 5, 2018•104 citations

High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors

Misael Caloz, Matthieu Perrenoud, Claire Autebert +6 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

•Jan 1, 2018•95 citations
In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.
Superconducting nanowire single-photon detectors (SNSPDs) are a key building block for photonic quantum technologies, as they provide a means for efficient readout of optical circuits with low timing jitter, dark counts and dead time. In this contribution we give a general overview of the working principle of these devices and look into several engineering aspects. We discuss the influence of the stoichiometry of NbTiN thin-films on detector performance and find that a ratio of 65:35 Nb:Ti results in the highest saturation of SNSPDs fabricated from these films. Furthermore, we study the impact of helium ion irradiation on the efficiency of SNSPDs. We show that with this technique the efficiency of an SNSPD can be improved from below 1% to 42%. Finally, we discuss the impact of embedding the SNSPDs into an optical cavity on the system detection efficiency. By employing a half-cavity under the detector we are able to boost the efficiency from 30% to 50% for a detector with a fill factor of 0.33.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
We fabricated superconducting nanowire single-photon detectors (SNSPDs) made of NbTiN and NbN thin films in the same fabrication batch. Various parameters, such as critical temperature, resistivity, switching current, and kinetic inductance, were compared between the two types of SNSPDs. These data indicate that NbTiN SNSPD surpasses NbN SNSPD in many aspects, including a shorter recovery time due to smaller kinetic inductance, a lower timing jitter due to higher switching current, and better uniformity. Based on the measurement of 28 out of 121 NbTiN SNSPDs on a 2-in Si wafer, 71% of detectors show a system detection efficiency of over 50% at a dark count rate of 100 Hz, with the maximum efficiency being 77.5%.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.